How about pouring a 2cm wide cylinder of clear resin allow to cure and remove from its mold. Then use colored glass beads instead of stones. For the final pour. put the clear cylinder in the middle of the base so that light from the bottom will have a path to get into the middle of the skull and backlight the beads
I've done one with marbles and curling ribbon. They are so cool. Going to try one with wooden balls next, but I'll need to pre resin the wood balls to minimize bubbles.
Wow, I really love this one!! if you wanted to have a light shine through more of the top, maybe you could add a layer of stones then do clear marbles, either those flat vase ones or round, to the middle by using tube, just stick it in empty, then pack the rocks on the outside edges around it. fill the tube with the vase beads then pull the tube out. I think that should work. Love your stuff!
That looked absolutely fantastic!! It would make a great garden ornament withe those beautiful stones. Maybe in an animal mould of some kind. Stunning!
Wow, that's my favourite thing you've made in resin this year Steve! I love the natural 'river bed' look it has, you've captured it perfectly. You decision not to add colour or glitter was a good one I think. I bet it sells super quick Steve! Have a great week!
hi Steve, love the vids. just an idea...instead of using a sharpie marker to mark your resin cup, use a wet erase pen. the ink will come off in water.... keep up the good work, I'm learning a lot
I also sew and have noticed that several sewers are using weights on their cloth \instead of pins when they cut out their patterns. These skulls would make wonderful cloth weights.
Really Cool. I tumble rocks and I am always looking for ways to use them. Thank you Steve. Hey put about 12 of these in a circle and you will have Stone-Head 😜
As always I love you’re ideas. You talks about doing one with only one kind of stone.. Try with 3 or maybe 4 kinds. I truly believe it will look WAUW🤩🥳 Maybe try in some other cool item Thank you for my favorite channels❤
Ohhh I love this! I have a bunch of gemstone chips that I could do in smaller moulds, I love it! I'm also so SO happy to see you using Big Wipes again, I went through about 15 of your videos the other day trying to get a good view to see exactly which Big Wipe variant you use, so thank you SO much for the link today, mega mega helpful, they really should sponsor you! 😁🌈💜
So..I was thinking ...how about putting some lights in with the stones? I think that would be awesome! OK... I am inspired! thank you so much for sharing this! six days later! :) cheers!
Great idea, I just bough a rock tumbler to see if it would be able to smooth out some 3D prints (alas no)... The kit came with a bunch of stones so I'll give it a go, I didn't hear you mention how much a piece like this would sell for. Cheers
What is the best way to clean out that mold you used in this video? I've got the same. I want to make sure it's clean inside before I pour resin again. So how should I clean the inside out. Your channel is very informative. Thank you very much.😊
I can’t believe the perfect placement of the white stone right on the teeth! 😍beautiful !
I couldn’t either. That was just pure luck lol.
That was so cool, and like everyone noticed, the teeth look so real!
How about pouring a 2cm wide cylinder of clear resin allow to cure and remove from its mold. Then use colored glass beads instead of stones. For the final pour. put the clear cylinder in the middle of the base so that light from the bottom will have a path to get into the middle of the skull and backlight the beads
Perfect gift for that person with rocks for brains.
All joking aside that's beautiful. I want one now along with a sea glass one for my book ends.
Have you tried making one using glass marbles instead of the stones? The light would probably shine through those.
The placement of the white stone is incredible, what amazing good luck!! Absolutely gorgeous piece, Steve, love it!
Hi Steve
When I'm having a bad day, watching your videos helps a lot.
God bless you.
Sylvia, Denmark
Those wipes are a GAME CHANGER - thank you for bringing those to our attention!
What did I miss? What wipes? New sub, love this channel so far
I love the effect. My first skull I ever made was filled with rough rose quarts.
I've done one with marbles and curling ribbon. They are so cool. Going to try one with wooden balls next, but I'll need to pre resin the wood balls to minimize bubbles.
I love the white stone right in the teeth. Couldn't have been more perfect. Your videos are amazing. Thank you for sharing your ideas and inspiration.
That is so cool! I really love it! That was awesome how a white stone ended up where the teeth are! Love it!
I did this for my wife for mother's day. She loves it.
Wow, I really love this one!! if you wanted to have a light shine through more of the top, maybe you could add a layer of stones then do clear marbles, either those flat vase ones or round, to the middle by using tube, just stick it in empty, then pack the rocks on the outside edges around it. fill the tube with the vase beads then pull the tube out. I think that should work. Love your stuff!
Now that is one gobsmackingly gorgeous stone skull! Absolutely love this project, Steve. Thank you and have a fab week! ❤
Oh my goodness what a great idea. I love to tumble stones also and this idea will sure come in handy. Thanks you so much for sharing this idea.
Hi Steve! Thank you for all you bring us. Just so happens that I want to start working with stones. Perfect timing
That's amazing, try it with polished glass, then the light might shine through. xx
This looks fantastic, I love it. I’ll have to get some stones and find a mould that I love. Thank you Steve.
Brilliant Steve, new ideas for my old store of stones, glass and shells. Your ideas are an inspiration. ❤
That looked absolutely fantastic!! It would make a great garden ornament withe those beautiful stones. Maybe in an animal mould of some kind. Stunning!
Amazing!! Getting the white stones just right, love the light underneath
So beautiful. Thanks for sharing
That white stone is fantastic, The whole piece is amazing. I get fired up when your new videos appear because I know they will be good.
Wow, that's my favourite thing you've made in resin this year Steve! I love the natural 'river bed' look it has, you've captured it perfectly. You decision not to add colour or glitter was a good one I think. I bet it sells super quick Steve! Have a great week!
Thank you Carly, it found a new home almost immediately. I’m polishing rocks like mad now to be able to make more.
I did one using glass beads… and a bit of transparent orange 🍊 so pretty 🤩
Just got your kit in the mail and am blown away. It's awesome
Was super surprised to see this project. I have made several of these in different molds over the past few weeks! Love how yours turned out!
That turned out fantastic. You should make more stone items. Thanks and have a great week. Byeeee
LOVE polished rock, Steve, and the skull turned out SO beautiful! ❤😍👍
Luv the stones in it!!
hi Steve, love the vids. just an idea...instead of using a sharpie marker to mark your resin cup, use a wet erase pen. the ink will come off in water.... keep up the good work, I'm learning a lot
Ohh wonderful, I've put tiny rocks in resin b4, but this is next level, such a brilliant 💡 u make such pretty things❤❤❤
OMGoodness!!! It's absolutely Beautiful! Love it!!
I did the same thing in the frog and skull just using garden stones, they are really nice, wish I would have had all the coloured stones you used💕
Beautiful, those rocks are stunning.
Turned out great!💖
Thank you
Hi Steve, try using a little dollop of hand sanitizer on your messy gloves and wipe them off with a paper towel. It works like a charm.
Thanks for the tip.
Hi Steve, that turned out absolutely brilliant. Iv got loads of beautiful stones and would love to make something similar. ❤
Gorgeous! You make such beautiful and amazing items. Love watching your videos.
I love the way the rocks look in this, I am going to have to try this!! Thank you
Absolutely amazing! Be a great paper weight 👍
Wow! This turned out so beautiful!
Nice, I have some river rocks that would be beautiful
I’ve been polishing rocks like mad to make more.
I used stone and looks really good I love it
Want to make it a lamp? Use TV Stone. Sorta fiber optic like. And glitter! It would look amazing.
Beautiful!
Gorgeous!!
Beautiful.
Awesome! 🤩How fantastic that the white stones were in it teeth area! 😁
I love your videos they give me joy! ❤
That is beautiful i love it i think people would definitely buy this i know i would
That is so cool, love it!!!
The sparkly reddish stone is "Goldstone" a man-made stone invented by monks. It's beautiful and I would like to imitate it in resin at some point.
I tried this a few weeks ago with gravel bought for a fish tank. Its clean but not pollished yet still comes out with a really bright finish.
Very cool!!! I think this would be sooo cool with agates/amethyst/other quartz variant because they’re translucent! :)
I did something similar with marbles in a frog mold, really looks good, will try in a skull next
We have been creating resin pieces with crystal and stone Chips for years!
Gorgeous 😊
This came out beautifully! ❤
looks amazing
I also sew and have noticed that several sewers are using weights on their cloth \instead of pins when they cut out their patterns. These skulls would make wonderful cloth weights.
I love that! Well done Steve 👍
Really Cool. I tumble rocks and I am always looking for ways to use them. Thank you Steve. Hey put about 12 of these in a circle and you will have Stone-Head 😜
I want watching them, especially that little giggle
Really cool. I thought it was great when you turned it around and the white rock was in the teeth 😁. 😍
I would definitely buy that.
so cool would of never thought of rocks
Absolutely loved it.
Wow. Stunning!❤❤
Really LOVE THIS ❤❤❤❤❤
Love this, looks so great. Did make me laugh that you kept rubbing the head at the end (no innuendo intended) 😂
As always I love you’re ideas. You talks about doing one with only one kind of stone.. Try with 3 or maybe 4 kinds. I truly believe it will look WAUW🤩🥳 Maybe try in some other cool item
Thank you for my favorite channels❤
Such an awesome look!
Your laugh makes me giggle everytime Steve❤❤❤ Love the Multicolor stone skull❤
Ohhh I love this! I have a bunch of gemstone chips that I could do in smaller moulds, I love it! I'm also so SO happy to see you using Big Wipes again, I went through about 15 of your videos the other day trying to get a good view to see exactly which Big Wipe variant you use, so thank you SO much for the link today, mega mega helpful, they really should sponsor you! 😁🌈💜
I’d love a flat bottom! Well, maybe just a bit flatter than it is right now 😊
So cool! I wonder if you used only semi-transparent stones would it work as a light?
I'm looking forward to seeing your video on how to polish stones. Those are beautiful stones you have. I wonder where you got them?
Perfect 🤩 placement on the teeth 😂 thanks Steve ❤❤❤
How long did the stones in the resin skull actually take to cure?
Great idea.
Thanks for texting back.
Looks beautiful,love it💯💯💯
I'm one of those. I measure the mold with water & write it on the outside.
****Super!!****
Fabulous love ❤❤❤
Love this
Love it!! ❤
I do this with the helping hands mold.
Thanks, checked this one after watching the marbles one. Laurie. NZ.
So..I was thinking ...how about putting some lights in with the stones? I think that would be awesome! OK... I am inspired! thank you so much for sharing this! six days later! :) cheers!
Awesome ❤
It could be made into a very nice desk lamp by drilling through it to run wires.
Steve, I'm very new to resin art and I so appreciate your channel. Huggy Wuggies from America.
I have to laugh. I LOVE your giggles! So is this called stoned? Hehehe. I love what you do!
I love watching you your so funny I love it😂😂😂😂 😊
Great idea, I just bough a rock tumbler to see if it would be able to smooth out some 3D prints (alas no)... The kit came with a bunch of stones so I'll give it a go, I didn't hear you mention how much a piece like this would sell for. Cheers
I love it 😍 I made something like that 3 month ago and i love to use stones 😊 Can you tell me what respirator you have with microphone? I can't find 🥺
❤😮🎉MAGNIFICENT
LOVEEEE
What is the best way to clean out that mold you used in this video? I've got the same. I want to make sure it's clean inside before I pour resin again. So how should I clean the inside out. Your channel is very informative. Thank you very much.😊
❤❤❤❤