Aviator Translation: "Put this part on/take this piece off"=Hydraulic system access panel. "A little compartment for the lights"=Upper anti-collision light. "A little vent here"=Tail rotor gearbox inspection window. Rocket pods=AGM-115 Hellfire Missles. Arms=ESSS (External Stores Support System). Side gears=Main landing gear AKA "Mains". Windshield=Windscreen. Rear Vents=HIRSS (Hover Infrared Suppression System). Rear Tail=Tail Boom. External Fuel Tanks=Drop Tanks. Tail =Stabilator. Scissors=Wire Cutters. Foot Pedals=Tair rotor control pedals. Joystick=Cyclic/Cyclic stick grip. "This I believe is for the cockpit."=Pilots/Copilots overhead instrument panel. "The rest of the cockpit"=cockpit floor panel, center instrument panel and pilots/copilots main instrument panel. Main gear=Main rotor transmission. Dog house=Main transmission compartment. "Let's move this out of the way"=#1 & #2 engine compartments. Tailrotor=Tailrotor quadrant assembly. Elevated tailboom=intermediate gearbox assembly. Tailboom=tailrotor main torque tube.
@@5564EVR Once you're in military aviation, you'll NEVER forget it! I was a jet engine mech & corrosion control /fuselage painting tech on the U.S. Navy's Lockeed Martin S-3 Alpha/Bravo Viking air anti-submarine warfare aircraft!
Navy version has a more robust landing gear because they would often land on a aircraft carrier that is moving up and down, left and right, forward and back.
Nothing lands on a ship. They board. One boards the helicopter, helicopter boards ship, it's a vehicle on top of a vehicle that's floating on water. But lets be honest here, even if you must arrest an F-18 in a controlled crash, beefy gear is merely an overcompensation for forgetting what land is. If you originated from the sea and had to do your first landing ashore, wouldn't you make the gear beefier because land is much harder solid ground with any cushion of water removed? Only thing bigger is the "land"ing gear huh... 'spicious.
@@Mr-pm3jp you don’t have a clue… helicopters land on aircraft carriers while at sea all the time. Which is the reason that the Navy’s BlackHawk has a robust landing system.
@@itzjoeylo4501 My bad dude, I understood exactly what you mean. I was just joking around with wordplay. "Land" as in soil, not as in touch down on deck upon arrival at carrier. I know "Land" is synonymous with any "end of flight touchdown" but I was having fun and taking strict coherence to the extreme by pointing out that "Land" more precisely means the moment of transition from air/sea to above sea level soil. Because strictly speaking, a carrier deck is just a vehicles(floating vessel) roof, which itself has not transitioned to soil, there can only be "boarding" aboard the carrier. But yeah, like I said, I know the Navy's F-18's also have the robust carrier gear as well, I'd assume all the carrier aircraft do.
Thank you so much Derrick for this video. I am new to helicopters and still learning how to fly. Currently, I am building the 450 Huey UH-1 by Rotorscale. I am training on the microscale XK K124. Your video is very helpful as to how the helicopter actually look like out of the box and its components. I'm looking forward of getting that model you have as soon as I get done building the Huey, then put them both aside and continue flying the microscale until i get proficient. Good luck with your new BlackHawk 700
Yes it's most definitely a hard scaled aircraft to find I did find one online. But it's pricey you can check it out. The link is at the bottom www.austars-model.com/roban-uh60-700-size-helicopterarf-green-military-color-scheme-one-in-stock_g3004.html Although it's online I will be cautious when purchasing anything without checking the credentials of the website. I hope this helps you out.
Where is the Main Control to be Able to Fly this Blackhawk 700, The Most Important Part of this Aircraft is The Remote Control. Does this part come with the Kit?
There are a few sites that come to mind I know of Motion RC and the three others sites below www.vario-helicopter.biz/ca/ www.easternhelicopters.com/ www.heli-factory.de/modelle/index.html None of which have the Blackhawk fuselage at that scale but Motion RC with the 700 scale. I hope that helps..... Good luck 😃.
@@dd0uble Hi Mr Derrick, thanks for the information, hey I'm trying to build a RC Blackhawk helicopter 🚁, I drew a picture of 2 meter 1/2 long and 2 feet wide, but I'm worries my rotors, maybe the helicopter is big, what do you advice me??
I just ordered one of these myself :D Do you put gyros in your heli's? If so which ones? I'm having a hard time really figuring out which one would be best for this.
I think the more pricey, the better. Im new to helicopters and I just got my 450 UH-1 Huey and I choose the BeastX MicroBeast Plus Flybarless System $139.00. Although there is one for $29.00. You can also get the BavarianDEMON 3X Flybarless System for $199.00. As the saying goes "You get what you pay for"
@@rubencarin yes you're right. The pricier the better. The Ikon cost $200. And their prices don't seem to be going down. The Beast x is pretty much the sister unit to the Ikon, I wanted to go with the Spektrum FC6250HX flybarless system. It gives you telemetry and everything. And way cheaper but a better buy. But it does not and I repeat does not support counterclockwise heads. But for your Huey the self recovery add self hovering feature is great for beginners. You won't have to worry about the helicopter pitching left and right. Just let go the cyclic and it'll self hover.
You'll be doing yourself a great deal of excitement. I fly my helicopters in Chantilly and Fort Washington with these aircraft any High School area is a good place to fly your helicopters. And if you need any help setting up your helicopter, just let the kids know. I have 13 plus helicopters
@@SoulTouchathePoetyou can get one from motion RC. They have in stock. The link at the bottom will take you there. www.motionrc.com/collections/military-and-government-rc-helicopters/products/roban-uh-60-black-hawk-700-size-scale-helicopter-arf
Hi Mr Derryck. I'm Eed. can you help me to get a helicopter like this. I am from Indonesia. how much for a helicopter like this. sorry for interrupting your time
It's crazy because of the pandemic. Everyone's inventory is low. They cost about 1749.00 US. But I did find one. What size are you looking for? Crazy question and since you want one like mine I will say a 700. But they're on back order. Here is a 600 you can check out it's the last one. When I get more information I will send it to you. Roban UH-60 Black Hawk V3 600 Size Helicopter Scale Conversion - KIT www.motionrc.com/collections/military-and-government-rc-helicopters/products/roban-uh-60-black-hawk-v3-600-size-helicopter-scale-conversion-kit
You can buy one from Motion RC by hitting the link below. www.motionrc.com/collections/military-and-government-rc-helicopters/products/roban-uh-60-blackhawk-scale-700-size-helicopter-arf
Yeah I'm sorry about that. I was just trying to show what came in the Box. And didn't really focus on the camera angles. It was a new camera wasn't really familiar with it. But I'll try to do better. Thank you for the comment.
Aviator Translation: "Put this part on/take this piece off"=Hydraulic system access panel. "A little compartment for the lights"=Upper anti-collision light. "A little vent here"=Tail rotor gearbox inspection window. Rocket pods=AGM-115 Hellfire Missles. Arms=ESSS (External Stores Support System). Side gears=Main landing gear AKA "Mains". Windshield=Windscreen. Rear Vents=HIRSS (Hover Infrared Suppression System). Rear Tail=Tail Boom. External Fuel Tanks=Drop Tanks. Tail =Stabilator. Scissors=Wire Cutters. Foot Pedals=Tair rotor control pedals. Joystick=Cyclic/Cyclic stick grip. "This I believe is for the cockpit."=Pilots/Copilots overhead instrument panel. "The rest of the cockpit"=cockpit floor panel, center instrument panel and pilots/copilots main instrument panel. Main gear=Main rotor transmission. Dog house=Main transmission compartment. "Let's move this out of the way"=#1 & #2 engine compartments. Tailrotor=Tailrotor quadrant assembly. Elevated tailboom=intermediate gearbox assembly. Tailboom=tailrotor main torque tube.
Roger that I'll be sure to upgrade on all the missing components and any other infractions on the next inspection 👍
@@dd0uble I was an HH60G flight engineer, just having some fun reminiscing. Surprised I remembered all that after being out for 22 years. LOL.
@@5564EVR Once you're in military aviation, you'll NEVER forget it! I was a jet engine mech & corrosion control /fuselage painting tech on the U.S. Navy's Lockeed Martin S-3 Alpha/Bravo Viking air anti-submarine warfare aircraft!
556 4EVER made his point. 3 years ago...... nothing like a LEGACY! lol
Navy version has a more robust landing gear because they would often land on a aircraft carrier that is moving up and down, left and right, forward and back.
Nothing lands on a ship. They board. One boards the helicopter, helicopter boards ship, it's a vehicle on top of a vehicle that's floating on water. But lets be honest here, even if you must arrest an F-18 in a controlled crash, beefy gear is merely an overcompensation for forgetting what land is. If you originated from the sea and had to do your first landing ashore, wouldn't you make the gear beefier because land is much harder solid ground with any cushion of water removed? Only thing bigger is the "land"ing gear huh... 'spicious.
@@Mr-pm3jp you don’t have a clue… helicopters land on aircraft carriers while at sea all the time. Which is the reason that the Navy’s BlackHawk has a robust landing system.
@@itzjoeylo4501 My bad dude, I understood exactly what you mean. I was just joking around with wordplay. "Land" as in soil, not as in touch down on deck upon arrival at carrier. I know "Land" is synonymous with any "end of flight touchdown" but I was having fun and taking strict coherence to the extreme by pointing out that "Land" more precisely means the moment of transition from air/sea to above sea level soil. Because strictly speaking, a carrier deck is just a vehicles(floating vessel) roof, which itself has not transitioned to soil, there can only be "boarding" aboard the carrier. But yeah, like I said, I know the Navy's F-18's also have the robust carrier gear as well, I'd assume all the carrier aircraft do.
Thank you so much Derrick for this video. I am new to helicopters and still learning how to fly. Currently, I am building the 450 Huey UH-1 by Rotorscale. I am training on the microscale XK K124. Your video is very helpful as to how the helicopter actually look like out of the box and its components. I'm looking forward of getting that model you have as soon as I get done building the Huey, then put them both aside and continue flying the microscale until i get proficient. Good luck with your new BlackHawk 700
Thank you and happy flying.
Derrik:i will do this like a boss. Me:eh ill do it later
Pretty impressive kit
I am new also, just looking at where to purchase kit and what it comes with, Thanks any information helps
Yes it's most definitely a hard scaled aircraft to find
I did find one online. But it's pricey you can check it out. The link is at the bottom
www.austars-model.com/roban-uh60-700-size-helicopterarf-green-military-color-scheme-one-in-stock_g3004.html
Although it's online I will be cautious when purchasing anything without checking the credentials of the website. I hope this helps you out.
@@dd0uble Thanks
Outstanding video a big help in deciding to do this...thank you
Where is the Main Control to be Able to Fly this Blackhawk 700, The Most Important Part of this Aircraft is The Remote Control. Does this part come with the Kit?
Very nice. I have 500 size.:)
🎅☀☀☀☀🎅☀🎅☀🎅🍾🎄🍾🙏🙏🙏🙏🙏🙏👍🌬👍🌬👍🌬🏂🏂🏂🏂🏂🏂🎇🎇🎇🎇🎇🎇🏺🕵🏺🕵🏺🕵🏺🍾🍾🍾🍾🍾🍾🍾🍾🍾🎄🙏🎄🙏🎄🙏🎄🙏🎄👍👍👍👍👍👍🎀🙏🎀🙏🎄🎄🎄🎅🎅🎅🎅🎅🎅🎅🎅🎅🏂🎅🏂☀🙏👍
Sorry !!! I am new in this topic. What scale represents this helicopter 700 ? 1:16 ? 1:8 ? Thanks
No problem .... It's a 700 scale Blackhawk fuselage.. the helicopter pilot that I put inside there is a 1/8 scale
where can i get one of those??
Hi buddy, quick question ⁉️ where can I get one like that on scale 1:3.5 or higher???
There are a few sites that come to mind I know of Motion RC and the three others sites below
www.vario-helicopter.biz/ca/
www.easternhelicopters.com/
www.heli-factory.de/modelle/index.html
None of which have the Blackhawk fuselage at that scale but Motion RC with the 700 scale. I hope that helps..... Good luck 😃.
@@dd0uble Hi Mr Derrick, thanks for the information, hey I'm trying to build a RC Blackhawk helicopter 🚁, I drew a picture of 2 meter 1/2 long and 2 feet wide, but I'm worries my rotors, maybe the helicopter is big, what do you advice me??
@@leonelcalderon8815 I'll probably recommend the head from a super scale 800 rotor head and blades..
I just ordered one of these myself :D Do you put gyros in your heli's? If so which ones? I'm having a hard time really figuring out which one would be best for this.
I'm using the Ikon with Bluetooth for a stable flight.
I think the more pricey, the better. Im new to helicopters and I just got my 450 UH-1 Huey and I choose the BeastX MicroBeast Plus Flybarless System $139.00. Although there is one for $29.00. You can also get the BavarianDEMON 3X Flybarless System for $199.00. As the saying goes "You get what you pay for"
@@rubencarin yes you're right. The pricier the better. The Ikon cost $200. And their prices don't seem to be going down. The Beast x is pretty much the sister unit to the Ikon, I wanted to go with the Spektrum FC6250HX flybarless system. It gives you telemetry and everything. And way cheaper but a better buy. But it does not and I repeat does not support counterclockwise heads. But for your Huey the self recovery add self hovering feature is great for beginners. You won't have to worry about the helicopter pitching left and right. Just let go the cyclic and it'll self hover.
What do you mean it feels fragile
It feels real thin. When you paint it you might want to put some hardener in it. Or flaberglass tape on the inside.
would a 12 inch figure fit the scale or to small
12-inch figure is too big. You would need a 1/8 figure to fit in that helicopter fuselage
Are the directions/instruction in English?
Yes the instructions are in English. You can download it off the internet on motion RC
Thanks @@dd0uble
@@mrcollins63 hey no problem anytime. The Blackhawk and ec145 will be post it on my RUclips soon the finished product.
where did you buy?
I got it at Motion RC..
Where do you fly? I live in Harford county and been debating on getting one of those
You'll be doing yourself a great deal of excitement. I fly my helicopters in Chantilly and Fort Washington with these aircraft any High School area is a good place to fly your helicopters. And if you need any help setting up your helicopter, just let the kids know. I have 13 plus helicopters
Bet. Where's a good place to purchase one.
@@SoulTouchathePoetyou can get one from motion RC. They have in stock. The link at the bottom will take you there.
www.motionrc.com/collections/military-and-government-rc-helicopters/products/roban-uh-60-black-hawk-700-size-scale-helicopter-arf
Good look fam
Hi Mr Derryck. I'm Eed. can you help me to get a helicopter like this. I am from Indonesia. how much for a helicopter like this. sorry for interrupting your time
It's crazy because of the pandemic. Everyone's inventory is low. They cost about 1749.00 US. But I did find one. What size are you looking for? Crazy question and since you want one like mine I will say a 700. But they're on back order. Here is a 600 you can check out it's the last one. When I get more information I will send it to you. Roban UH-60 Black Hawk V3 600 Size Helicopter Scale Conversion - KIT www.motionrc.com/collections/military-and-government-rc-helicopters/products/roban-uh-60-black-hawk-v3-600-size-helicopter-scale-conversion-kit
How many thousand dollars that cost ?
Then 1087.00 now 2237.00. A big difference, huh?
What is the Cost of this Kit?
Motion RC sells it for $2,055. When it first came out it was only about 1,900
How can i get it
You can buy one from Motion RC by hitting the link below.
www.motionrc.com/collections/military-and-government-rc-helicopters/products/roban-uh-60-blackhawk-scale-700-size-helicopter-arf
A great pity that 60% of that was off camera. It seems strange that the windows were ready fitted. Makes it difficult to paint.
Yeah I'm sorry about that. I was just trying to show what came in the Box. And didn't really focus on the camera angles. It was a new camera wasn't really familiar with it. But I'll try to do better. Thank you for the comment.
Main bhi is tarah ke helicoter kharidne chahti ho aap mujhe karo please
Link ?
This is the link were you can buy one..... scaleflying.de/UH-60-Blackhawk-700-Superscale/SFUH60-7S
Main bhi choricha chahti ho mujhe aapki help chahie
what scale
It's a 700 scale
Very painful to watch...
Painful to watch?.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🙏🙏🙏🙏🙏🕵🏺🕵🏺🕵🏺🎅🎅🎅🎅🎅🎅🎅🎅🎄🎀🎄🎀🎄🎀🎄🎀🎄🎀🎄👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍🍾🏺🍾🏺🍾🏺🍾🏺🍾👏👏👏👏👏👏👏👏👏👏👏👏👏🏂🏂🏂🏂🏂🎅🎄