Build the BEST DIY 3D Printer - Arduino Coding and firmware upload 1/2 #16
HTML-код
- Опубликовано: 11 сен 2024
- Check the General BOM - Bill Of Materials here:
bit.ly/2Hj6APA
------------------------------------------------------------------------------------------------------------
In the sixteenth episode of the "Build the BEST DIY 3D Printer" series, we are going to start programming the Marlin, that is the firmware or OS that will power our 3D Printer..
In the next episode we are going to finish the Arduino programming with the Marlin step by step, so be sure to check it out!
Down below you will find the links to download the necessary STL files, as well as the links to buy the necessary components.
You can support us on Patreon here:
/ architects3dp
Subscribe to our RUclips Channel Clicking here:
goo.gl/UMEuL7
------------------------------------------------------------------------------------------------------------
In this series we are going to build a complete 3D Printer from scratch, inspired in the prusa i3 MK2S original by Josef Prusa, but using alternative / more affordable components, what will result in a total price below the 200€ mark.
If you follow our steps in each of the episodes, at the end of the series you will end up owning one of the BEST DIY Custom 3D Printers in the market, and the best part is that you designed and built it from scratch.
------------------------------------------------------------------------------------------------------------
LINKS & BILL OF MATERIALS
Arduino software:
arduino.cc
Marlin Firmware:
marlinfw.org
------------------------------------------------------------------------------------------------------------
LIST OF EPISODES
1. Presentation of the project
• Build the BEST DIY 3D ...
2. Y axis structure
• Build the BEST DIY 3D ...
3. Y axis movement
• Build the BEST DIY 3D ...
4. Y axis electronics and cable management
• Build the BEST DIY 3D ...
5. Heated Bed Installation
• Build the BEST DIY 3D ...
6. X axis structure
• Build the BEST DIY 3D ...
7. X axis electronics and cable management
• Build the BEST DIY 3D ...
8. Z axis frame assembly and electronics
• Video
9. X, Y and Z axis assembly, Structure Complete
• Video
10. Extruder Preparation and Assembly
• Build the BEST DIY 3D ...
11. Extruder and structure assembly
• Build the BEST DIY 3D ...
12. LCD, assembly, installation and cable management
• Build the BEST DIY 3D ...
13. Power Supply preparation and assembly
• Build the BEST DIY 3D ...
14. Power Supply installation and cable management
• Build the BEST DIY 3D ...
15. Main Board Installation and connections
• Build the BEST DIY 3D ...
16. Arduino Coding and Firmware Upload 1/2←
17. Arduino Coding and Firmware Upload 2/2
• Build the BEST DIY 3D ...
18. First adjustments and calibrations
19. Cura optimisation - First quality prints
------------------------------------------------------------------------------------------------------------
I hope you guys enjoyed with this video and subscribe to our RUclips Channel, and give a lot of likes to the videos motivating me to keep producing my content!
Subscribe: goo.gl/UMEuL7
If you want to follow us on social media to stay tuned when new content is uploaded, you will find them in our website:
architects3dp.com
------------------------------------------------------------------------------------------------------------
Finally I would like to propose you to become a Patron through the next link: / architects3dp
By doing that, you would make me super happy and you will also help me to keep bringing good content to the channel.
Furthermore your name will appear at the end of all the videos, and much more rewards such as early access to the videos, access to the files, get our maker coin and more cool stuff that you can find in our Patreon page!
Finally, give a special thanks to our Patreon supporters and as always:
-See you, in the next, video!!
M4730X - Architects3DP
~-~~-~~~-~~-~
Please watch: "BEST 3D PRINTER in 2021? FOKOOS ODIN-5 F3 Review"
• BEST 3D PRINTER in 202...
~-~~-~~~-~~-~
4:40 Info
5:02 Machine
6:33 Extruder
7:30 Machine
7:44 Temperature
10:32 Extruder
11:14 Homing
12:07 Motion
13:33 Probes
16:32 Machine
Excellent details in this video. I have been watching homemade 3D videos for a while but never seen anyone giving these details. Appreciate the effort. Thank you.
Thank you very much for your comment muhac80 :)
Hello guys, BIG NEWS! I've uploaded the General Bill Of Materials with all the components that will be used in the build. Please read the Instructions. You can find the link in the description.
4:40 Info
5:02 Machine
6:33 Extruder
7:30 Machine
7:44 Temperature
10:32 Extruder
11:14 Homing
12:07 Motion
13:33 Probes
16:32 Machine
thanks Hamza, I'll add it to the video.
This is the most complete and detailed guide i've ever seen...
Thank you so much for this!
dang i thought this series was done now i gotta wait
it'll be done soon tiernan :) thanks
hello brother i am a civil engineer, i build our own 3d printer at home i check it by pronterface if i click -x axis it moves to the + x axis the stepper motors wires are perfectly all right what should i do for the calibration
12:32
@@architects3dp ok sure
So here is one i cannot figure out.
On my Y-axis (the moving print bed) i have 1 endstop. if i manually move the bed with my hands away from the endstop (so its NOT pressed) i can then move the bed fine with pronterface.
once i hit the end stop after moving the Y-axis in the + direction, i can't move the bed in the -Y direction because it releases the endstop (first pressed - then release) and tells me in the Pronterface interface: "Endstop Hit" and the -Y direction is stuck. i can only move it in the +Y direction but then it will hit the endstop but doesn't stop..
-im a beginner at coding and using arduino and a 3d printer, but i'd like to learn more about it-
Probably you have a wrong connection of cables with the endstop.. pay attention to the cables/pins used and try again so maybe it’ll work with no problems
@@architects3dp Thank you!
i toook a look at the motherboard and the wiring, to my surprise one of the endstops was wired backwards, once i changed that it fixed my problem 😊
That’s good! Please recommend the channel 🤗
Is this 3D printer work with Arduino UNO R3?
It works with the Arduino MEGA
WHY NOT USE AN ADAFRUIT M4 GRAND CENTRAL 32BITS VS 8BITS SAMD VS AVR
Yeah, why not?
I already sent an email to you about 3d printed parts but with no answer till now.
Why did you delete parts of the code?
Auto home is not working properly what should I do
Hi friend, just follow every single step in the guide and it'll work fine =)
Okay bro thank you I will once check it for that
It's quite difficult for me to diagnose what's the problem if I don't have the printer here I hope you understand, thanks for your comments :)
@@architects3dp Ok bro I can understand
I finally checked the all wire connections all are ok but need to change my mother board right
Mateo, so I understand, the files for this project are only available to Patreon subscribers, correct?
Joe
Yes My Heap :)
no it is avaliable here: www.prusa3d.cz/tisknutelna-vylepseni-tiskarny/ and for free
Hi, can you please share the exact marlin file that you've shown here.
hi Hamza, it's been 3 years since the video was uploaded. I modified the printer since then, installing silent stepper motor drivers and so on. Don't have the original file any more.
Can you send me 3d printed STL files
they are published in my patreon blog, links in each of the videos :)
wtf
www.prusa3d.cz/tisknutelna-vylepseni-tiskarny/