Hello. if you are having issues please contact your local branch and ask for technical support. they will be able to assist you this this issue. visit our site for more info.
can someone please help answer my question. 📷 I have this camera "IPC6322SR-X33UP-D" ->>> it goes into ->>> NVR302-16S2-P16 ->>>HDMI OUT ->>> HDMI SWITCHER ->>> HDMI SPLITTER/EXTENDER IP OVER ETHERNET (ACTING AS TX) ->>> MULTIPLE HDMI IP OVER ETHERNET RX ->>> HDMI INs MULTIPLE TVs. The problem .. On the end device (multiple TVs), is showing that the IP Camera is low frame (low fps). Even though when I checked on the UI > Camera > Encoding settings > Main Stream and Sub Stream showing as 1080p at 25fps. The question.. Is it possible that the HDMI Extender over IP is causing the low fps or is it always the UI Settings misconfigured when it comes to low fps? This NVR302-16S2-P16 has 2 display output. 1 HDMI OUT 1 VGA OUT The single unit monitor is plugged with VGA OUT - The liveview through here shows 1080p@25fps fine with no issue The HDMI OUT is connected to the HDMI Switcher .. and continue same as what was said above-above Please help troubleshoot the ROOT CAUSE of this low fps issue. 📷 I am at a point where I need to isolate the root cause of the issue, but since I have very very little knowledge about Surveillance System, I cannot make a guess...
Hello, do I need to format thumbdrive before backing up?
yes. you will need to format it to fat32
Hey, I did all of this but my sound isn’t backing up?
Hello. if you are having issues please contact your local branch and ask for technical support. they will be able to assist you this this issue. visit our site for more info.
Now, how to safely remove the USB flash drive?
once is done backing up you could safely remove it
can someone please help answer my question.
📷 I have this camera "IPC6322SR-X33UP-D" ->>> it goes into ->>> NVR302-16S2-P16 ->>>HDMI OUT ->>> HDMI SWITCHER ->>> HDMI SPLITTER/EXTENDER IP OVER ETHERNET (ACTING AS TX) ->>> MULTIPLE HDMI IP OVER ETHERNET RX ->>> HDMI INs MULTIPLE TVs.
The problem .. On the end device (multiple TVs), is showing that the IP Camera is low frame (low fps). Even though when I checked on the UI > Camera > Encoding settings > Main Stream and Sub Stream showing as 1080p at 25fps.
The question.. Is it possible that the HDMI Extender over IP is causing the low fps or is it always the UI Settings misconfigured when it comes to low fps?
This NVR302-16S2-P16 has 2 display output.
1 HDMI OUT
1 VGA OUT
The single unit monitor is plugged with VGA OUT - The liveview through here shows 1080p@25fps fine with no issue
The HDMI OUT is connected to the HDMI Switcher .. and continue same as what was said above-above
Please help troubleshoot the ROOT CAUSE of this low fps issue. 📷
I am at a point where I need to isolate the root cause of the issue, but since I have very very little knowledge about Surveillance System, I cannot make a guess...