I am also impressed with your build of the panel saw! I know this is an older video, now - and you mention in comments that you have a newer design. If you still have them, I would love to receive a copy of your DIY plans as well! [edit: email removed - plans received]
amazing !!!im from cancun mexico and we dont have all the parts to make it but im waching all the vertical panel saw videos to take the best way to make it
Great job you did on that panel saw! I think I recognize the way that it attaches to the pipe as a ShopNotes version, I will have to look for plans. What modifications have you made to improve the original plan?
very clever consruction seems to be very handy and easy to use i prefer a vertical panel saw because its much safer than a table saw may you always keep your ten fingers best regards from germany
Thanks for the plans. I see you have a few tweaks on the original plans. If you were to make another, are there any other changes you would make? Do you find when making a ripcut/horizontal cut you have the top board trying to bind the blade? Is the horizontal rest for the board sacrificial on vertical cuts?
yes it took about a week to get all the parts together and it was basically done using the Shop notes design with a couple of alterations to that ,glad you liked the saw
Great design. I see below you are willing to send plans. What type format are they in? I use Sketchup mostly, but let me know please. Again, great design and execution.
Hi Alex, Fantastic piece of equipment - I've been think of building something similar for a while now. Two questions: 1) When doing a length-ways cut (horizontally), what if the cut you need to make happens to be right over one of the horizontal supports, above the mid-fence? Won't you cut into it? 2) Similarly, when doing a cross-cut as you demonstrated, don't you cut into the fence?
Great job. I assume that you could also make an adapter for a router? I have been thinking of this for awhile and think for the investment and for limited space, this would be a better option then a table saw. Do you charge for the plans? Thank you for your time
This Panel Saw looks like the same plans that appeared in Woodsmith magazine 8/2014. It looks like you have different verticle guides, added rollers on the lower rail & your upper guide is pipe rather than 1-1/4 EMT. I ordered a set of plans but have not started my build yet. I plan to rotate my saw via a center point & locking pin (raise the blade & plunge in zero clearance slots) I hope it works) Good build, how long did it take you to complete?
This is the best budget sliding panel saw vid iv seen, there is a guy whos made a computerised one which is also fantastic but this saw will appeal and satisfy many woodworking enthusiasts. thank you so much for sharing.. if you would be willing to sell me a copy of the plans so that i may copy some of the ideas for my own id be very grateful, thank-you.
Hi there the timbers behind the panel being cut are sacrificial and come time will need replacing these are still the same ones iam using on the saw from the first day i started using the saw and as yet havent replaced any.hope this helps
Alex, Very nice construction! Where can I find the shop notes design you used? Thanks for your video. You wife did a good job with the camera and sound also. Reuben
Olá, as molas eram de um antigo conjunto de exercícios de peito que eu tinha por aí, mas você também pode usar alguns pedaços de elástico de borracha, isso faria o mesmo trabalho, usei isso na segunda serra que fiz e funcionou tão bem quanto as molas
This is great design. Would it be possible to have the plans please? Also one silly question, what happen when you have to make a cut that ends directly on a back support stud?
@AlexPSNB Alex can you post a couple pics of the rollers and the central support you added . we are getting ready to bhuild one that will handle 5X5 sheets for the NortheastWoodworkers shop near albany ny.
Good day, i wonder if you will still have the plans for this machine... Could you please let me know if you do, i used to have my own woodworking company, and due to financial problems was forced to sell all my equipment... Im thinking of trying again. but dont really have the money to do so... PLEASE help me!!!
Hey brother great job done here, I would gladly purchase one if you would be willing to sell one except the saw I have two. Which is why this project would be good to use one on.
Dear Sir, I am gathering all the material to build a similar saw, thank you for your video and details about it. Can you please tell me the kind of spring you used to compensated the weight of the tool ? They look like garage door springs but the wire diameter of these is always too big and the springs are too stiff. Thank you for your help. Best Regards, John
John Martin it was the type that is used on the old type of chest expanders. My latest saw that I built uses the rubber bungee cord and it works just as well
Thank you very much for your answer, I just found a used "brand new" arm stretcher with 3 springs 2km from my home for 5€. Thank you for the tip ! Building of the saw can carry on...
Hello, I repeat my congratulations ..... that good work, the best I've seen, and I wrote a year ago and now I would like to know if you can sell those plans, excuse the insistence.
good evening I have a small joinery in Brazil and would like to be setting up your project. you could send the saw project. Thank you very much in advance . claudiorlara@icloud.com
Bonjour Monsieur, j'ai vu beaucoup de vidéos sur les scies verticales, pouvant me donner des idées sur mon projet d'en réaliser une dans mon atelier. Vôtre scie m'a enthousiasmé. Auriez-vous conservé les plans de vôtre réalisation, et serait-il possible de s'en procurer un exemplaire s'il vous plaît. Cordialement.
It took about,a week on and off if I remember correctly,I have since built a different design and if you send your email I will send you some pictures of the Finnished saw.
Alexander Birnie i would Readly like to have Theo Plans in it is possible please Write back and i will sende Mythos E-Mail But i Will Not send my E-Mail if im Not sure you Write back
That would be great if you could send me pics of the new panel saw and any plans that might be available, my email address is lwlawrence123@gmail.com. Thanks
I just found your video and have ordered parts for the Shopnotes design but was interested in your design would you be able to share the alteration with me if i sent my email address?
![Latto - Sunday Service (feat. Megan Thee Stallion & Flo Milli) [Remix] (Official Video)](http://i.ytimg.com/vi/9gL0F1xIt2I/mqdefault.jpg)
This has to be the nicest panel saw setup I've seen.
Thank you
Thanks for the plans. Now I know at least one project I want to tackle this year. :)
Very nice panel saw!. Has everything I am looking to build in one.
I am also impressed with your build of the panel saw! I know this is an older video, now - and you mention in comments that you have a newer design. If you still have them, I would love to receive a copy of your DIY plans as well! [edit: email removed - plans received]
Best one I have seen! Great concept, looks easy to use!
amazing !!!im from cancun mexico and we dont have all the parts to make it but im waching all the vertical panel saw videos to take the best way to make it
Hi Alexandre, that´s an amazing job, congratulations!
best DIY vertical panel I have seen so far. Can I dare to ask for plans? That would be awesome. Thank you!
Great job you did on that panel saw! I think I recognize the way that it attaches to the pipe as a ShopNotes version, I will have to look for plans. What modifications have you made to improve the original plan?
Great panel saw and great video. I wish I would have seen this years ago. Any Chance I could get the plans for this too???
Great video. I love it. Could you please send me the plans
Very Nice... The conduit with rollers makes it super nice.
very clever consruction seems to be very handy and easy to use i prefer a vertical panel saw because its much safer than a table saw may you always keep your ten fingers best regards from germany
Thanks for the plans. I see you have a few tweaks on the original plans.
If you were to make another, are there any other changes you would make?
Do you find when making a ripcut/horizontal cut you have the top board trying to bind the blade?
Is the horizontal rest for the board sacrificial on vertical cuts?
yes it took about a week to get all the parts together and it was basically done using the Shop notes design with a couple of alterations to that ,glad you liked the saw
Great design. I see below you are willing to send plans. What type format are they in? I use Sketchup mostly, but let me know please. Again, great design and execution.
Congratualtions, Alexander. the best designs I've seen
I would love to have a copy of the plans if possible, I thank you in advance.
MARIA ANTONIA send me your e mail address
Alexander Birnie
Hi, alexander, my e mail address is
carlosmario20142014@gmail.com
Hi Alex, Fantastic piece of equipment - I've been think of building something similar for a while now. Two questions:
1) When doing a length-ways cut (horizontally), what if the cut you need to make happens to be right over one of the horizontal supports, above the mid-fence? Won't you cut into it?
2) Similarly, when doing a cross-cut as you demonstrated, don't you cut into the fence?
Great job. I assume that you could also make an adapter for a router? I have been thinking of this for awhile and think for the investment and for limited space, this would be a better option then a table saw. Do you charge for the plans? Thank you for your time
owesome design .... best of all. can you share the plan ?
great job how is half sheet stop in there
This Panel Saw looks like the same plans that appeared in Woodsmith magazine 8/2014. It looks like you have different verticle guides, added rollers on the lower rail & your upper guide is pipe rather than 1-1/4 EMT. I ordered a set of plans but have not started my build yet. I plan to rotate my saw via a center point & locking pin (raise the blade & plunge in zero clearance slots) I hope it works) Good build, how long did it take you to complete?
This is the best budget sliding panel saw vid iv seen, there is a guy whos made a computerised one which is also fantastic but this saw will appeal and satisfy many woodworking enthusiasts. thank you so much for sharing.. if you would be willing to sell me a copy of the plans so that i may copy some of the ideas for my own id be very grateful, thank-you.
Hi there
the timbers behind the panel being cut are sacrificial and come time will need replacing these are still the same ones iam using on the saw from the first day i started using the saw and as yet havent replaced any.hope this helps
Hi Alexander, that is one heel of a design, could I trouble you also for the plan? Thanks heaps
Great job. trying to get one together
Alex,
Very nice construction! Where can I find the shop notes design you used?
Thanks for your video. You wife did a good job with the camera and sound also.
Reuben
That's very well made.
Is this based on the plans that Shop Notes had?
Desde Colombia gracias
Very Good Job I like It.....
what happen at the end of an horizontal cut when all the weight of the upper piece of wood push against the sawblade? What prevent this?
Belo trabalho irmão, parabéns . Mostra como vc fez esse sistema de molas p subir e descer a máquina
Olá, as molas eram de um antigo conjunto de exercícios de peito que eu tinha por aí, mas você também pode usar alguns pedaços de elástico de borracha, isso faria o mesmo trabalho, usei isso na segunda serra que fiz e funcionou tão bem quanto as molas
Me mande seu e-mail que te mando algumas fotos da segunda serra que montei, que funcionou muito bem.
Excelente trabajo....Podrías facilitarme los planos y medidas...Gracias
At 8:04 what prevents you from cutting into the resting board (where your panel rests on the rack).
رهيب عاشت ايدك
Hello Alexandre, are you able to email plans for this? I got really surprised about your design!!
just what i was looking for, could i bother you for a set of plans. would be greatly appreciated. thank you very much.
This is great design. Would it be possible to have the plans please? Also one silly question, what happen when you have to make a cut that ends directly on a back support stud?
send me your e-mail
the back supports are sacrificial
Hi there, I am Italian and I really would like to know if you have a plan to build your vertical panel saw.
Your job is great.
Thank you.
Hi. Nice job! I'm in the process of making one. I've the idea but have some thoughts on the bearings.. can you tell me how did you put them?
send me your e-mail address
Boa tarde Alexander Birnie, gostei do seu invento como faço para adquiri seu projeto.
Great design! Could you email me a copy of the plans? Thanks
@AlexPSNB Alex can you post a couple pics of the rollers and the central support you added . we are getting ready to bhuild one that will handle 5X5 sheets for the NortheastWoodworkers shop near albany ny.
Congrats. Great looking tool. I know I'm commenting a little late but is there a chance I can buy a set of plans? Thank you
send me your e-mail address
Hello any plans ?
it is indeed a brilliant design, would love to see the plans if possible!
send me your e-mail address Matt
mcoscia@yahoo.com, thanks so much!
ME as well - gerrie@dustmedia.co.za
Do you still give out plans for this panel saw?
Thanks,
Jayson
Beautiful job! was hoping you could send me a link to the plans. or whatever is best thank you.
send me your e-mail
Thank you
Great video - can you send me the plans. Thanks
I love this idea. Are the plans still available.
Sende your ail address
@@AlexPSNB mweaver527@yahoo.com
now thats clever. Bravo
This is one of the best designs I've seen, are you able to email plans for this?
+One Man Band Woodworking send me your e-mail address
+Alexander Birnie Thank you, message sent.
+Alexander Birnie , please can you send me plans for vertical panel saw? thank you
if you have planes on how you did this would love them
Hello, is it possible to get plans for ths amazing design?
Send me your email address
Excelente
Excellent craftsmanship! Are these plans still available?
Send me Ur email address please
Birniealexb@gmail.com
Did you end up getting the plans?
yes it was i just made a few changes to the shop notes design
Alguien me puede decir como hago para que el disco no me toque en las maderas de atas de la maquina? gracias
Fantastic design, could I get a copy of the plans or purchase a copy?
David Ward Send me your e-mail
Many Thanks dave@versarack.co.uk
Very Nice! Please make the plans available!
Send me ur E-Mail
is it possible to send me plans? brilliant idea.
Thanks for sharing well done
Good day, i wonder if you will still have the plans for this machine... Could you please let me know if you do, i used to have my own woodworking company, and due to financial problems was forced to sell all my equipment... Im thinking of trying again. but dont really have the money to do so... PLEASE help me!!!
are you still sending the plans out
Nice!
i love the inventiveness of carpenters
Look out when they figure out they can also use metal cutting tools too.
Buenos días, disculpe usted podría facilitar los planos de esa sierra vertical.. Gracias
Hi, Congratulations!! good job, could you send me the plans?
send me your e-mail address
Just in case, if you forgot send the plans my email is jlsantizo.jls@gmail.com
Alexander Birnie can u send me plans my e-mail is snowhawaiiano@gmail.com
This is great!, Can u please send me plans as well my email is visioneridesign@gmail.com? Thank you.
schubert_ricardo@yahoo.de :) thanks
Alexander sure looks like everyone is wanting the plans for your saw how about it?
Send me your e-mail address bud
exelente
Hey brother great job done here, I would gladly purchase one if you would be willing to sell one except the saw I have two. Which is why this project would be good to use one on.
Dear Sir, I am gathering all the material to build a similar saw, thank you for your video and details about it. Can you please tell me the kind of spring you used to compensated the weight of the tool ? They look like garage door springs but the wire diameter of these is always too big and the springs are too stiff. Thank you for your help. Best Regards, John
John Martin it was the type that is used on the old type of chest expanders. My latest saw that I built uses the rubber bungee cord and it works just as well
Thank you very much for your answer, I just found a used "brand new" arm stretcher with 3 springs 2km from my home for 5€. Thank you for the tip ! Building of the saw can carry on...
John Martin okay that's good you have managed to get springs..I wish you success with your build.
Alexander Birnie . Can you please supply copy of plans for your diy panel saw ? To elphesketh@googlemail.com
Hello Mr. Alexander, my name is Milton, I´m from Brazil. So, I would like to buy the plans of construction of this vertical panel saw. It´s possible?
cracking saw, just what im looking to make, can you send me the plans
Send me your address
Super!
Hello, I repeat my congratulations ..... that good work, the best I've seen, and I wrote a year ago and now I would like to know if you can sell those plans, excuse the insistence.
Mario,send me youre-mail address and i will send the plans on to you
Alexander Birnie ..... my mail: mueblescovalto@hotmail.com and mueblescovalto@gmail.com ..... thanks.
good evening
I have a small joinery in Brazil and would like to be setting up your project. you could send the saw project. Thank you very much in advance . claudiorlara@icloud.com
Opps, hit send to quickly. What sort of accuracy are you getting?
The saw is very accurate for sawing panels to size,send me your email address will send them onto you
@@AlexPSNB Thank you for your quick reply. Email prince.barnwood@gmail.com. Stay safe
Super top
ALSO, what's the maximum capacity? Can it cut 5x5ft Baltic birch sheets?
He did say it will cut a full size 4'x8' sheet.
very nice......
Dear friend, you made this project with artistry and creative ability
Can you provide me with this plan?
Send me your email address...
Hi, is good job! Is possible to send me plans. Thanks
is there a parts list and instructions how to build one, if so would u be able to send via e-mail? thanks
Bonjour Monsieur, j'ai vu beaucoup de vidéos sur les scies verticales, pouvant me donner des idées sur mon projet d'en réaliser une dans mon atelier. Vôtre scie m'a enthousiasmé. Auriez-vous conservé les plans de vôtre réalisation, et serait-il possible de s'en procurer un exemplaire s'il vous plaît. Cordialement.
Send me your email address
@@AlexPSNB Merci pour vôtre réponse.
Voici mon mail: kancress@yahoo.fr
Cordialement.
It took about,a week on and off if I remember correctly,I have since built a different design and if you send your email I will send you some pictures of the Finnished saw.
Alexander Birnie i would Readly like to have Theo Plans in it is possible please Write back and i will sende Mythos E-Mail But i Will Not send my E-Mail if im Not sure you Write back
i would love plans of this saw and pic plans of the new saw. This is awesome. kruhl@rti-inc.com
That would be great if you could send me pics of the new panel saw and any plans that might be available, my email address is lwlawrence123@gmail.com. Thanks
can you send plan
nice.....
Alexander, Can you send me a copy of the plans also?
Very nicely done Alexander.
You may be getting tired of this request, but I too would very much appreciate a copy of your plan.
Have liked and subbed.
Send me your email address
nice one ...could you send me the plans too @ rvsshekhar@gmail.com ..... saw your new yawl ...nicely made......
I just found your video and have ordered parts for the Shopnotes design but was interested in your design would you be able to share the alteration with me if i sent my email address?
goodnight as they call media you are using to the saw suguetar
Legal uma maquena que geme
why not make money and pay a specialist for a good one of the the shelf.try selling it and see the responce
send me your e-mail again as the one you wrote is not reconized
holi
XD
Or buy a real one for 200$ used like i did, easily used as a panel router as well.
Hi , Alexander , can u send this plan to my e-mail address?
send me your e-mail
send me your e-mail address