Это видео недоступно.
Сожалеем об этом.
New Level of Safety and Function for the Table Saw || Clamp On In Feed Table
HTML-код
- Опубликовано: 14 авг 2024
- Thank You for all your support! InFeed Tables - bit.ly/iyyspro...
When it comes to infeed tables for table saws they are almost always big and bulky. I designed this infeed table to clamp on to the table saw in seconds and be removed just as quickly. The safety and function of an infeed table without all the hassles of big bulky setups just makes it much more likely to be used, adding an element of safety and stability to operations with sleds and jigs.
andly klien cork rubber video - • Best vise liner testing
My CNC - bit.ly/2VOMsgz
affiliate link -
Sandpaper Saver - amzn.to/3k4ukYI
My Links -
website - www.izzyswan.com/
Instagram - / izzyswan_woodworking
Hey Izzy, Don't forget us Sawstop Jobsite Saw users! Something like this is sorely needed... Thanks loads for all the videos, explanations, ideas and inspiration.
Ditto!
Third
He is using it on a Saw Stop.
@@RobyWanKenobi but not a jobsite sawstop.
@@RobyWanKenobi Yes it is a Sawstop but it's not the portable Jobsite saw...very different.
Bought it. Used it within the first week. Continue to use it. Makes life so much easier and safer.
Made it only 2 and a half minutes into the video before scrolling to link in description and buying. This is the thing I've needed for years, but never even knew it.
Impressed by the amount of detail you put into it to finish it. Wish it worked for my saw as I would have likely bought one to support - keep doing what you doing!
I’m a carpenter with forty plus years of experience I’ve preached my whole to my crew jigs and how important they are for our continued safety I appreciate your thought process
Can’t wait to try it out. Something we all struggle with, Thanks Izzy for solving the problem for us all... 👏❤️👏
So good to see you up and about without being in pain -- god speed!
Best - Michael
Great job Izzy Swan 👍 that is awesome now you need to design one for tubular fence rails. Because my saw has them.
Fantastic idea! I constantly have this issue with my SawStop JobSite.
It's so simple that it took someone smart to think about it.
Well put, sir
Thanks izzy, pre ordered my Dewalt model just now. Only thing missing is your brand mark.
Did you get the infeed table yet?
@@melissalara2 nothing, nada, nilch
I asked on his Instagram when I was getting the infeed table and he deleted and blocked me from commenting on his instagram. I just wanna know when I'm getting it. We pre-ordered on August 3... that's way too long of a wait
Did your Dewalt version ever arrive?
@@NV..V yes but it didn't align properly
Received your In Feed Table for Standard Table Saws. Breeze to put it together..but the video instructions said to locate the latch 2" away from the table because of the miter slots. Well, the miter slot was actually 1 5/8" away. The screws protruded into the miter slot so I had to redo that part. No issues besides that. This does solve instability issues I struggled with in the past.
Brilliant idea, made one for my saw. Because it is a cheap contractors saw (but works beautifully), the rip fence rail is extruded aluminium, fortunately with flat surfaces top and bottom, I devised a clamp that holds it against those planes with the cam acting in the vertical axis. I've just used it to square up the ends of some glued up panels using my mitre gauge, a job that I always had trouble with in the past. Why did none of us think of this in the past? Thank you Izzy.
ordered outfeed table, , paid for out feed table never got
out feed table great service.never got answer to requests.
Tried to order for a ship to Canada. got stuck at Shipping & Delivery screen with the message "No shipping options for this location, package weight and total". Will have to wait until the border opens up to ship it to my buddy's house. Brilliant idea Izzy.
My mid 90's Unisaw came with something similar but out of cast iron and locks on to the unifence rails. I hardly ever see them around and not sure why they are not more common. This looks like a good solution.
Izzy
My table saw infeed table just came. I installed it and it works great. I am in awe of your talent
and creativity. Can’t wait to see what you are up to next
Terry
I’m just very pleased to see you bobbing around, Izzy! 😎👍🏻👍🏻
Absolutely an awesome idea and product
This is fantastic!! I’ve always thought why is this not standard with TS. You’re a thinker and genius. Buying mine right now!
This is why I watch you, excellent.
HI IZZY IM SO HAPPY SEING YOU ON YA FEET AGAIN HOPE YOUR WELL AND GOOD. KEEP SAFE BRO.
Great Idea. I ordered one to save myself the trouble to make one. looking forward to putting it on my Saw
Will you do a companion vid with the Dewalt version? The measurements at the end of this vid would be helpful for those with off brand job site saws. Other than that shut up and take my money, love the concept!
Thanks for saving me so many trips to the store and emergency room!
Looks a lot like that front table extension that Shopsmith introduced back in the 1950’s that replaced their front table extension from the 1940’s! Seriously, it’s a great idea and I’m surprised it hasn’t been produced commercially until now. Cottage Industry for the win! Way to go, Izzy. Scott
This is genius. Its a problem ive always had to solve with my tracksaw, which is a pain in the ass. Great job dude!
Hi Izzy, to start off I think this table saw extension is amazing and well designed.
So simple and elegant, very well-conceived.
Thanks heaps for this Iz, it will really solve my table saw issue
Love that design, it doesnt block access to controls and give the support needed. Now you need to make one for the Bosch 4100.
Working on it!
Perfect, spectacular, and spot on!!! I ordered mine as soon as I saw this video. I have used multiple "solutions" for this, none of which I liked. I am looking forward to receiving mine soon.
Glad it helped!
What a cool 😎 channel ; just came across it by accident. Looking how to make a sled . Smashed that like button , like I was making a snap tie , only because I saw 👀 those pieces of rebar in the corner! Ben a ironworker for over 30 years ! Want to try a little wood working for a hobby ,
Great idea ! I can't tell you how many times I've needed an extra foot or two of infeed support . I'll have to make one though, 1 -because my grizzly has a round fence bar , and 2- I have some laminate left over from a job. TU for sure !
Thanks Izzy. Just what I need for my Dewalt job site saw. I immediately placed my order after watching this video.
thank you
Have you got it yet Steve?
Mel & George Lara Not yet. But Izzy sent me two emails apologizing for the delay. It appears he was not prepared for the large number of orders received.
Will this work on The DWE7491RS? Thanks!!!
yes
This is by far the best, very best You Tube channel! “Izzy you the man!” Great job!
Wow, thanks!
Happy to see you in that good shape ♥️
Just got it and it fits and works great on my SawStop.
Thank you so much!!! I ordered one before you got into it once I saw what you had there! I had a great DeWalt hybrid saw (I think it was the 746) and had the small but beautiful cast iron sliding table on it. Well when I sliced off the end of two fingers my wife told me to get the SawStop. Bye bye DeWalt 746. I really miss that sliding table but I put out the cash for the Incra 5000 miter sled so I could still easily (or so I thought) true up the tops and bottoms of cabinet sides. Your infeed clamp is exactly what I need ... at least I'm hoping so ... to use that sled on parts that are 24" wide. THANK YOU!
I have a Skilsaw table saw. I love it, but have this same issue. This is exactly what I need.
I literally needed something like this today, and was about to slap something together, then I saw your video and it looks far better than what I would've come up with. Ordering now!
Cool jig! Names' gotta go though. How about the "In-feed Baby Grand" or "In-feed Grand Piano" or some such?
I’ll be putting ordering one for my saw stop! Thanks issy! 👍🏻
Just finished installing mine. FYI, installation steps were identical for my jet xacta fence for a good fit. Amazing idea, Izzy. I debated shamelessly ripping off the design and making my own, since its easy enough and I have everything needed laying around. And I'll be honest, the shipping cost made me cry a little bit. But for the great idea, and how easy it was to get installed, the price was a steal.
My only feedback so far - I think it could use a longer bushing on the cam clamp so I can tighten down the bolt without binding it up or worrying about it falling out down the road. I'm a little skeptical about the clamp arrangement in general, but I'll be putting some miles on it to see how it goes before I make any changes.
Great idea Izzy! Glad to see you back on your feet!
You need to manufacture more of these, Izzy
Thanks for such a great idea, just been down to my saw for measuring and will have to make one myself as the height dimensions are smaller but doable This will make a big difference to my sawing and handling larger pieces in safety and confidence Yahoo!
Awesome. I love the idea of extending the table for the plywood cutting
Ingenious solutions as usual. And it's good to see you back on your feet!👍
I'm disabled vet and even with my wifes help in feed AND outfeed is tricky. Looking forward to getting mine.
I love your ingenuity
Awesome fixture Izzy! Great to have you back at it and progressing from surgery. Would love to have one for my SawStop job site saw gen. 1 Is that something that you will be offering at some point? Keeping my fingers crossed and my hopes up that the answer is YES! Stay safe and healthy my friend!! Mike
Izzy, kudos on a great idea. When I saw 'in feed table' in the title I figured it was going to be in the way. Again well done.
Awesome idea Izzy. I love the way your mind works. Keep up the good work.
I like this guy
Kinda looks like a baby grand piano! Love the idea though. Nice work!
I was so excited when I saw it, I ordered it before taking the measurements on my Ridgid tablesaw. There is no gap between the saw top and the mounting rail. Hopefully a couple of washers will rectify that. Fingers crossed
we are release the infeed i designed for the ridgid next week. just shoot my team and email and they can make the switch if you would like. you can email us via my web site izzyswan.com
@@izzyswan I ordered the standard infeed table, I would like to change the order to the Ridgid version that will be released next week.
great idea, need/want one. By the way you are looking great post operative. Keep up the great work
Clever and elegant! Like its inventor :)
Just got mine as an early Christmas present! Can't wait to use it!
Great job Izzy! I like that thing.
Thanks! I have a factory built extension for my old ShopSmith.
Oh yeah, memory, that's what it's called!
😊. Take care Izzy!
Izzy you’re a genius!! Brilliant idea!
Great idea! Good to see you on your feet again too.
I ordered both for my UK version of the DW745 on Sunday, massively looking forward to fitting them both. These will make a massive difference for my saw which is on wheels in a small workshop. They will compliment my "Flappy Paddle" safety stop switch which I sell on my Etsy Store.... Thanks Izzy (I will put up a link if Izzy has no objections)?
Very excited to see how the DeWalt one will work.
Good idea and nice work! 👍 👌
Brilliant!!! I need this in my life!!
Very nice!!!
Genius. I've had those very same issues so many times. Already ordered one.
That start was funny, popping into the doorway.
good to see you standing
What a great looking product, a must have for most table saws. 👌🏾
Awesome work and excellent invention, mate. 👍🏾
I'm a fan of the DeWalt DWE7480 for it's compact design with safer R&P guidefence, but something similar to this is good idea to go along with my outfeed/router table extension design. 👍
Great ideas. My antique saws would need totally refabbed. Possibly could use the top piece and redo the mounts for the fence slides but all my saws are different and hundreds of years old.
Awesome! At $39 you are basically making about $1.20 an hour (or it looks like) - I first thought ‘oh, I can make that!’ But I’ll order it instead!
Great to see you up and walking, man!
Hey, thanks!
Awesome idea brother I’m the same with you I love those panel sleds but they only cut so much without it getting floppie Moppie love it dude keep them coming!!
Thanks again man awesome sauce
8/28/2020 USA Grandpa Bill: that tapering jig and infeed table are exactly what I need on my Ridgid portable contractor's table saw.
very nice thanks.
Lol I'm glad I kept watching, I was like I guess I gotta design one for my Dewalt job saw.... but nope izzys got me covered
Love the ingenuity! Great job Izzy; thanks for thinking of us out here.
Absolutely brilliant!
Thank brother means a lot coming from you!
It's a great idea. Makes you slap yourself for not coming coming up with it on your own!
Do I smell a collaboration brewing?
Izzy, Im still waiting on the dewalt ingeed table, any news on the delay?
@@PERRYS_PROPS Me to
great invention please do the vid for the dewault option
Brilliant idea!
That's awesome! Genius addition to any saw.
I just saw this. Its brilliant! Thank you
I did something similar to this with just a couple of pieces of 2x4's notched to sit over the front rail. I shimmed the top up to exactly level with the table top using Formica off-cuts from a table top build for my son's trailer. The width can be adjusted individually to provide edge to edge support. I have been using this for years and had assumed that everyone did something similar. Maybe I should have said something back then, I use them so often that they pretty much stay on the saw.
Ordering the Dewalt model. I was just planning on making some kind of rolling in-feed table and now I won't have to.
Very good idea and design.
Good Idea!!
So simple what a genius 🤓
Very cool idea 👍
Thanks for sharing.
Awesome product Izzy. Ordered one this morning. Thanks!
You’ve done it again brother! Love it! Ordered!
🙏🙏
Great idea.... How much of this do you dream up when you can't sleep at night..... Your cool ideas just keep coming. It helps make me more creative with what I do and how I can get it done.
Izzy
You always have something (and often many somethings) to improve the accuracy and safety of my shop in every video. I am a musician and am extremely careful not to injure my fingers and hands but love to work in wood in my shop.
Thank you,
Sweet. Just bought one!