awesome video, i think this is my first ever yt comment. you helped me fix my sons non retracting beyblade launcher, and for that, both of us are in your debt. be well good sir.
Mine don't break the coil as fast as you, one did after a while, but they do bind up fairly fast. Even the red ones. After so many launches, every 2-4 launches the string seems to bind up a little bit and tug back a bit on you while you are launching. Making you mislaunch/weak launch. As if the string didnt wind up right or something and got stuck on itself. Happened to one launcher after like 10 launches. Hopefully just taking them apart and rewinding the string works? Maybe its twisted up a bit? Anyone know of this issue?
Lmao, you break these in ten launches?? My first one still works just like it did on day one and I use almost daily. I love the video, don't get me wrong. It's really cool/good to see whats inside this device. I just can't believe that you break these that fast, thats wild.
@Adam-rw4xk it's just the white/black molds that break that easily. Red and blue are fine. Few Japanese players have the same experience and Kei from wbo also has the same breakage issue as me.
Halfway through I remembered your Blader name from Ali(?)'s tournament video and now it makes sense as to how you break your launchers so easily. You're like the One Punch Man of launchers LOL 😱
letting go of the string and pulling too hard is what kills string launchers, I find pulling it quick and stopping just before the string ends and guiding the string back gives just as powerful of a launch without putting stress on the launcher
@jessietrevino3178 pretty sure the instructions and official takara tomy videos both present the string launcher to be used by letting go of the string
@soumyodeepchatterjee2000 there's only a temporary fix that wouldn't make it tourney legal. Taking off the black casing around the prong will make it not get stuck as easily.
Ive never broken any of mine, even from metal fight. And im 6'2 and 250lbs, and lift very heavy. I think you just need to change up how you're gripping or get the easy release grips. Thanks for the video
@Keithsview898 strength doesn't matter. It's all agility. And these white/black launchers just can't handle high speed launches. MFB, Burst, and red/blue x launchers are perfectly fine.
@@1234beyblade that's my point that strength doesn't matter. The only reason I said that about myself is that I'm that strong and have had no issues with them. Now I will say I was under the impression that you were using too much strength. Which is why you were running into this problem. I control my strength with string, I still have my black one from the first wave.
@@Keithsview898 Thing is, yes you do want to control your launch. but what if you're in a tournament situation where both you and your opponent have perfectly balanced tuned beys and you need to launch as hard as possible to get more RPM than your opponent to win your matchup. This is all very situational, i don't always go all out, but when I need to I don't want my launcher breaking on me. Edit: During solo practice I like to stress test to see how much a launcher can take. These black/white launchers just cannot withstand the upper limit of my launch abilities. Which is how I find out that these moldings of launchers break so easily. The new gold launcher from tournaments has this issue too lol, the recent winner of it from waribey in Japan has broken it same way I did with this one.
@vicaslan I just know how to push to the limits of the launcher while still being able to control it. Do I always launch this hard? Of course not. But if I need to, I will, and I don't want my launcher breaking on me.
I am an absolute baboon and I broke mine within 2 days of having it (hasbro Soar Phoenix red launcher), but now that I have the understanding that the red launchers aren't supposed to break that easily, I think I'll just stick to ripchord launchers for the sake of saving time and money 😅
yeah the coil i think winds up in reverse on the left launcher. gotta follow the direction of the arrow that indicates which way to winds up to wind the coil.
I don't think the blue one is fine, I've broken both of my 2 blue ones very quickly, and they're the only ones I've broken out of them, a black, and a red one edit: I've used all of them pretty heavily, except the second blue one, and the first blue one was my primary launcher after supergluing the spring into place
@Real_Gray_22 you have to make a new circle for the small plastic rod to attach to. It will no longer be tournament legal. No one will be able to tell really, but you should just be honest and not use it. For tourneys you'll have to buy a new one unfortunately.
@Real_Gray_22 it's not easy that's for sure. Not really something I can explain in text, you just have to find a way to replicate the original shape to allow the shaft to coil up the metal again.
@pickleman-zh3ff That's wrong. The intended way to launch is exactly how I do it. Pinch the handle just hard enough so it automatically releases when the string runs out.
Yet after my fix you can pull as hard as you want and bottom out the string. interesting how that works. the exact intended way of use is to pinch the handle just hard enough so the handle breaks free from your fingers the exact moment the string bottoms out. The breakage also has nothing to do with the string, it's all to do with the retraction being too volatile and fragile in these specific molds of string launchers.
please do an uneditied version of this... the edits led to me having no luck with my own and it came to me throwing the launcher along with all hope for me being able tp play with x beys until christmas in the trash... just because the edits caused me to not fully know what to do T-T
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Came back to this to try this method for my L string launcher since it constantly kept getting caught and surprisingly worked great
4 months later, with this video I saved my black X string launcher that just broke recently
awesome video, i think this is my first ever yt comment. you helped me fix my sons non retracting beyblade launcher, and for that, both of us are in your debt. be well good sir.
this is great for the community. love it!
Mine don't break the coil as fast as you, one did after a while, but they do bind up fairly fast. Even the red ones. After so many launches, every 2-4 launches the string seems to bind up a little bit and tug back a bit on you while you are launching. Making you mislaunch/weak launch. As if the string didnt wind up right or something and got stuck on itself. Happened to one launcher after like 10 launches. Hopefully just taking them apart and rewinding the string works? Maybe its twisted up a bit? Anyone know of this issue?
Great video and tutorial!! i can't wait to put my custom strings in the X string launchers. i'm running 56 inches in db's
Nice lol, hopefully the gear can actually hold that much string lol. I'm sure you know it's not tourney legal at that point, but yeah.
THANK YOU SO MUCH!! I managed to fix my Left spin launcher because of this video :)
Lmao, you break these in ten launches?? My first one still works just like it did on day one and I use almost daily. I love the video, don't get me wrong. It's really cool/good to see whats inside this device. I just can't believe that you break these that fast, thats wild.
@Adam-rw4xk it's just the white/black molds that break that easily. Red and blue are fine. Few Japanese players have the same experience and Kei from wbo also has the same breakage issue as me.
@@1234beyblade Thats good to know; I'll have to keep a eye on my white/black string launcher.
Great, was able to finally fix two broken springs from fake launchers.
Halfway through I remembered your Blader name from Ali(?)'s tournament video and now it makes sense as to how you break your launchers so easily. You're like the One Punch Man of launchers LOL 😱
I assume this should work the same for a left string launcher, just opposite direction, right?
Is there a possibility you can super glue the coil with the latches inside so it won't move permanently?
@ethguy9227 it wouldn't be tournament legal at that point.
letting go of the string and pulling too hard is what kills string launchers, I find pulling it quick and stopping just before the string ends and guiding the string back gives just as powerful of a launch without putting stress on the launcher
@jessietrevino3178 pretty sure the instructions and official takara tomy videos both present the string launcher to be used by letting go of the string
u da best man!!🎉
I just got a beyblade x set andi was looking this because if my string launcher breaks idk what to do
CobaltDragoon launcher has this same issue?
@@soumyodeepchatterjee2000 no. The string gets tangled in the dragoon launcher. Different issue.
@@1234beyblade expecting a video on a fix for the CobaltDragoon launcher too!
@soumyodeepchatterjee2000 there's only a temporary fix that wouldn't make it tourney legal. Taking off the black casing around the prong will make it not get stuck as easily.
Ive never broken any of mine, even from metal fight. And im 6'2 and 250lbs, and lift very heavy.
I think you just need to change up how you're gripping or get the easy release grips. Thanks for the video
@Keithsview898 strength doesn't matter. It's all agility. And these white/black launchers just can't handle high speed launches. MFB, Burst, and red/blue x launchers are perfectly fine.
@@1234beyblade that's my point that strength doesn't matter. The only reason I said that about myself is that I'm that strong and have had no issues with them.
Now I will say I was under the impression that you were using too much strength. Which is why you were running into this problem.
I control my strength with string, I still have my black one from the first wave.
@@Keithsview898 Thing is, yes you do want to control your launch. but what if you're in a tournament situation where both you and your opponent have perfectly balanced tuned beys and you need to launch as hard as possible to get more RPM than your opponent to win your matchup. This is all very situational, i don't always go all out, but when I need to I don't want my launcher breaking on me.
Edit: During solo practice I like to stress test to see how much a launcher can take. These black/white launchers just cannot withstand the upper limit of my launch abilities. Which is how I find out that these moldings of launchers break so easily. The new gold launcher from tournaments has this issue too lol, the recent winner of it from waribey in Japan has broken it same way I did with this one.
@@1234beybladeNot doing the slip grip is my guess to as why they're breaking. Of course it's just a guess.
@@Adam-rw4xk if you mean slip grip, as in letting go of the handle. Then that's exactly how I launch. You can see it in the video.
well ive used my white and black launchers for a long time now and they havent broken so idk man lol
@thelurker5466 well I launch hard, hence why I broke it in 5 tries lol
@@1234beyblade *launch wrong
@@Adam-rw4xk lol my tourney placements say otherwise. People fear my launches.
@@1234beyblade I mean I launch extra hard as well I’m not like starting an argument about it was just saying that’s weird how you’re breaks so fast
@thelurker5466 ye idk. That was the 6th one lol. All within 10 launches. But not a single broken one that are red or blue.
So the red and blue beyblade x string launchers are much less prone to breaking right?
@HungryMan9165 generally, yeah. But so far, I've found most molds manufactured in 2024 break more easily.
@@1234beyblade oh really, thanks I’ll consider this when buying
My coil ended up folding and lost it's shape, I'm not sure how to get it back to it's original shape, the ying yang shape..
i have the hasbro red one for soar phoenix and it broke after like 6 launches so i’m here now
I think it also depends on how hard youre going on the string. Ive had only 1 string launcher for awhile and its been in good condition since
@@tmymo yep, I was doing 80% launches to demonstrate the break. They're really fragile at intense launch powers
I was curious about what was inside and i f'd up and it jist stopped retracting the string
I mean LUCA always doing great launches with string + Japanese using mostly String and rarely broken
@vicaslan I just know how to push to the limits of the launcher while still being able to control it. Do I always launch this hard? Of course not. But if I need to, I will, and I don't want my launcher breaking on me.
@@1234beyblade ❤️
I am an absolute baboon and I broke mine within 2 days of having it (hasbro Soar Phoenix red launcher), but now that I have the understanding that the red launchers aren't supposed to break that easily, I think I'll just stick to ripchord launchers for the sake of saving time and money 😅
My hasbro string launchers coil snaped 😢
i did this today and the springs are small
I followed this tutorial and ended up breaking the coil ;( must not work the same for left launchers
yeah the coil i think winds up in reverse on the left launcher. gotta follow the direction of the arrow that indicates which way to winds up to wind the coil.
Mine wouldn’t retract so I fixed it and made it stronger
I don't think the blue one is fine, I've broken both of my 2 blue ones very quickly, and they're the only ones I've broken out of them, a black, and a red one
edit: I've used all of them pretty heavily, except the second blue one, and the first blue one was my primary launcher after supergluing the spring into place
My coil snapped. How do I fix that??
@Real_Gray_22 you have to make a new circle for the small plastic rod to attach to. It will no longer be tournament legal. No one will be able to tell really, but you should just be honest and not use it. For tourneys you'll have to buy a new one unfortunately.
@@1234beyblade How do I do that because I have tried twice, failed, and cut my finger in the process. Clearly I am doing something wrong.
@Real_Gray_22 it's not easy that's for sure. Not really something I can explain in text, you just have to find a way to replicate the original shape to allow the shaft to coil up the metal again.
Just can't remove the 3 bolts
It’s breaking cus your pulling it all the way out with full strength then that damages the inside, just don’t pull all the way and you will be fine
@pickleman-zh3ff That's wrong. The intended way to launch is exactly how I do it. Pinch the handle just hard enough so it automatically releases when the string runs out.
Thank you so much i just save my self from spanking my ass bc its brand new and i just broke it and im a filipno
Thanks
Don't pull the string until the end, i repead, don't pull it until the end
Do you mean string?
Yet after my fix you can pull as hard as you want and bottom out the string. interesting how that works. the exact intended way of use is to pinch the handle just hard enough so the handle breaks free from your fingers the exact moment the string bottoms out. The breakage also has nothing to do with the string, it's all to do with the retraction being too volatile and fragile in these specific molds of string launchers.
Mine came broken, dang
I didn't even mean or try to break my launcher😭
There was nothing I could do
please do an uneditied version of this... the edits led to me having no luck with my own and it came to me throwing the launcher along with all hope for me being able tp play with x beys until christmas in the trash... just because the edits caused me to not fully know what to do T-T
You’re ripping it entirely too hard
@@crispys.8907 how will you win mirror stamina match ups either than going all out on launcher power?
First