This is important for my project, I just want to know if the tracks that you used on this model will be rigid enough to deal with a little larger amount of weight, like the zig-zag stuff beneath the thin layer of the cardboard at 2:24, whether they will be "squashed" under high pressure, and hence the tank will be ruined and it won't be able to move anymore. Also, I want to know if they won't tear apart like when they are moving with the wheels, since you fixed the two ends with some sort of glue or something, I was wondering if they would just tear and the tracks will be destroyed. Hope you will reply, and thanks for this cool video!
If you want to use cardboard... you're better off converting cardboard to the much stronger variant. First, you need a blender, cardboard, water, and a mold. (unsure if the glue in between some cardboard will cause a problem) Second, you need to soak the cardboard and process it in the blender... a goop is about the consistency I would go for. Third, you would need to empty the blender into the mold and compress it, unsure how you might speed up the drying process or how this step should properly be done; I recommend looking online if you have any questions. lastly, after a few days, it should be dry and maintain its shape with a hardness near to MDF or whatnot. Basically, you need two parts of a mold to compress it to a certain thickness, if you can maintain a constant height across the piece then you could probably use 2 flat tiles, but I would expect better results from using a frame. The goop will compress to extremely small thicknesses, and when dry, will remain at that thickness and be far more durable than regular cardboard. I first saw the process in a RUclips video where a person compressed a few boxes or so into a small mold for a DIY Bluetooth speaker... the resulting material was rather hard and able to be drilled into while maintaining its shape.
@@abdullahalmueed You are welcome. Figure it would also increase its overall durability, and with a bit of watertight sealing like with an oil coat (forget the actual name of the oil-like thing they coat cardboard with that is not epoxy), it should be a toy you can enjoy for a long while :D
If the wheels are rotating in only one direction then how is the tank going right or left? I mean it should be confined to forward and backward movement.
There are 2 motors connected to each drive wheel. When you are pressing the buttons to go left or right on the controller, then the motors work individually.. Like if you are pressing left then the right motor is working or spinning the right drive wheel. Which is making the tank go left or rotate left. This is how actually tanks work.
@@kevwulf5629 hey! yesterday i was building the tank it took me 1 hour to make it. the problem is my tank wont even run! The motors are too weak. my wheels are not circle but egg-shaped wheels.my bateries are the simple but cheap li-ion bateries. I need a much stronger motors and a heavy duty bateries. With a little more time and effort of cardboard and glue guns. My tank will soon run on our concrete floor.
I'm doing the same thing! but i am modifying an old italian toy called "orion 5" have you built yourself the electric circuit? or wher did you found it?
Yo! so im trying to make a tank similar to this for a school project so could you please tell me the components you used in the video and if possible then the code you used as i can modify to fit my criteria.
if u attach some rubber on the tracks it will help on rough terrain and gives it more traction to climb up some steep terrain :D
Thank you for your opinion!
Thanks it helps me 😀😀😀
8:45
the little tank was angry for not being able to kill the glass set..... hahahha
tooooo cute tank i have ever seen
A cute but tough tank.Maybe you can puncture somebody’s car tire as a prank or revenge
Seriously this thing popped a ballon
Классно! Главное из подручных материалов. Я вот тоже делаю из подручных, только предпочитаю из дерева. Можешь посмотреть.
You should give it a camouflage too... great video!!! Could you give measurements next time
Tank's weakness the dredged water🤣🤣🤣👌
Nice video. It looks like a real tank
This is the most beautiful thing ive ever seen! Like it's impossible to make that with out this video thanks!
hey man, could you share blueprints and dimensions of each board? thank
bro it's not to have measurements because it's more for you to see the format and you already have an idea of how to do it
Nice working tank I wish I had make it
How do you control this tank and any other vehicles you made
Bro can you tell which system you use two button car system or four
Hey, great craft, keep it up. But it'd be better if you added a material list in the description
YEP
Love this new challenge for you add suspension
This is important for my project, I just want to know if the tracks that you used on this model will be rigid enough to deal with a little larger amount of weight, like the zig-zag stuff beneath the thin layer of the cardboard at 2:24, whether they will be "squashed" under high pressure, and hence the tank will be ruined and it won't be able to move anymore. Also, I want to know if they won't tear apart like when they are moving with the wheels, since you fixed the two ends with some sort of glue or something, I was wondering if they would just tear and the tracks will be destroyed. Hope you will reply, and thanks for this cool video!
It's cardboard, just layers of paper
If you want to use cardboard... you're better off converting cardboard to the much stronger variant.
First, you need a blender, cardboard, water, and a mold. (unsure if the glue in between some cardboard will cause a problem)
Second, you need to soak the cardboard and process it in the blender... a goop is about the consistency I would go for.
Third, you would need to empty the blender into the mold and compress it, unsure how you might speed up the drying process or how this step should properly be done; I recommend looking online if you have any questions.
lastly, after a few days, it should be dry and maintain its shape with a hardness near to MDF or whatnot.
Basically, you need two parts of a mold to compress it to a certain thickness, if you can maintain a constant height across the piece then you could probably use 2 flat tiles, but I would expect better results from using a frame. The goop will compress to extremely small thicknesses, and when dry, will remain at that thickness and be far more durable than regular cardboard. I first saw the process in a RUclips video where a person compressed a few boxes or so into a small mold for a DIY Bluetooth speaker... the resulting material was rather hard and able to be drilled into while maintaining its shape.
@@Suzuki_Hiakura Thanks for the advice fam, helps out a lot
@@abdullahalmueed You are welcome. Figure it would also increase its overall durability, and with a bit of watertight sealing like with an oil coat (forget the actual name of the oil-like thing they coat cardboard with that is not epoxy), it should be a toy you can enjoy for a long while :D
Great vid but I would suggest tightening the tracks.
X
Thank you for this tutorial because our school challenge us that we will make our cardboard creations that can move
Quá đẹp🤩🤩👏👏 rất ủng hộ bạn những video như này tiếp tục phát huy bạn nhé
the tank is very nice
Very nice tank
I made a cardboard tank and the turret is a metal straw that you blow into to launch some wet paper or something
An you please give the blueprint of all the parts. Because I don't know what size should it be. Thanks
Wow! It's AMAZING😰😮
Really cool tank! Very pretty as well! Thanks for upload!
bro i need the part name thats amazing
Awesome video man the tank is really great!
You are right
If the wheels are rotating in only one direction then how is the tank going right or left? I mean it should be confined to forward and backward movement.
There are 2 motors connected to each drive wheel. When you are pressing the buttons to go left or right on the controller, then the motors work individually.. Like if you are pressing left then the right motor is working or spinning the right drive wheel. Which is making the tank go left or rotate left. This is how actually tanks work.
@@amitavabiswas5260 I get it now. Thanks a lot. 🙃
@@amitavabiswas5260 Thanks for the info, I am making a motorized tracked cardboard model of my own, hope this helps.
Very cool tank
You are true genius
Buddy
You are a smart boy
Thanks
thanks!
Can you also tell the names of the material required....
What transmitter and receiver was that??
Where to buy that
nice video, mate!
i subscribed! :D
Please ..make a video how to connect wire to canon please!
Fantastic job!
Incredible video!
Good tank
can you please share the dimensions
Bác mua TX RX xịn quá. thích ghê...
hello, what are those yellow attachments with each tamiya motor?
It's a geared motor or a dynamo speed reducer
@@redjosefs.degamo4914 Thank you man! well appreciated! Cheers to tanks! Your tank has inspired me to build my own. :)
@@kevwulf5629 hey! yesterday i was building the tank it took me 1 hour to make it. the problem is my tank wont even run! The motors are too weak. my wheels are not circle but egg-shaped wheels.my bateries are the simple but cheap li-ion bateries. I need a much stronger motors and a heavy duty bateries. With a little more time and effort of cardboard and glue guns. My tank will soon run on our concrete floor.
@@redjosefs.degamo4914 We'll be awaiting your new creation, keep it up man! looking up to you and your ideas. :)
@@kevwulf5629 :)
Wawww aap kina acha bane te ho rc tank
Bạn dùng keo dán sắt để dán luôn hả ?
Nice hard work
Is it a one time fire mechanism, or can it be used multiple times?
strongest russian tank deployed in ukraine:
You actually swiped. This is strongest tank that Ukraine has 🎉💪💪💪💪🔥🔥🔥🔥🔥
I made the tank itself but I used the turret design only
nice work .. look mine too from cardboard rc
QUESTION DID U JUST TOKK OF THE RC PARTSSS,I MEAN THAT GREEN STUFF
Bộ tạo lửa là dùng cái gì vậy bạn
Watch this video to learn more please!
ruclips.net/video/ReMYMD6sjag/видео.html
@D. DIY bạn làm bằng những mạch gì , pin gì với cái tay điều khiển nào vậy :v
can u share template of it ??
nice tanks and neat, good video 1 sub
It's very nice
I subscribed you...
It took me 2 hours just to make circles
instructions not clear
a disappointed viewer
Awesome! Great job!
BRO WHAT REMOTE CONTROL DO YOU USE?! IS THAT HUINA? PLEASE TELL ME. THE EXACT AND DETAILED NAME OF IT :)
Where can I find "engine" and battery? Thanks
Walmart
Watch this video to learn more please!
ruclips.net/video/ReMYMD6sjag/видео.html
क्या टैंक बनाया है भाई
I'm doing the same thing! but i am modifying an old italian toy called "orion 5" have you built yourself the electric circuit? or wher did you found it?
Bahut acha 😁😁👍
Hello , nice projec dude,
Where i can find the controller and receiver?
Thanks
Watch this video to learn more please!
ruclips.net/video/ReMYMD6sjag/видео.html
Is army tank a module ka to link bhejo😅
Please describe details regarding remote control components and source
If you like this video, don't forget to subscribe to my channel 😘😘 ruclips.net/channel/UCGNqrq8MOiC3COCyFQZGYYA
yo bro how did you achieve this? what did you study in school
can you share relay circuit ??
Where can I found remote control and rectangle yellow thing
It's called ardruino mate ... ardruino gear motors
@@brianlulz4944 its not an arduino m8 u blind or somethin?
Great job!
Bro plz mention the cm of cardboard
খুব সুন্দর
Yo! so im trying to make a tank similar to this for a school project so could you please tell me the components you used in the video and if possible then the code you used as i can modify to fit my criteria.
0:18 Việt Nam, Bạn Là Người Việt Nam
Yes
👋 nice video 📹 👌 👍
Very nice detail
What is the name of components
What is the device that turns the tanks head called?
I have dislike because u are not telling material name
Thanks for you
Bro, i need the name of all materials.
Watch this video to learn more please!
ruclips.net/video/ReMYMD6sjag/видео.html
Làm T-54 thử đi bro :) Mình cũng có 1 con T-54 :)
tôi Có Con T72 Nha bạn
@@pvt.jamesramirez1057 video làm ông ơi
@@minhquanhoang6122 làm lại để tôi Mất 3 ngày Làm à
@@pvt.jamesramirez1057 tôi xem kênh ông có thấy video T-72 đâu. Ống ném link fb đây tôi kết bạn xem tăng nào
@@pvt.jamesramirez1057 hoặc ông vào kênh tôi đi. Có đg link fb đó
Its T90 BHEESHMA..
What are the dimensions?
No way
❤️ ❤️ ❤️ ❤️
D. Diy bhi Mojha Raa achha cha banaka Bachoga. Up bolo agar bachoga to kitna logha plz bolo Comment par
It's good but you can do it better
i didnt get the part where he built the tank
Pretty simple I’m just to lazy
@@kelp_954 same here and i am bad at cutting circles and straight lines on cardboard cuz i hate myself
@@tincup3683 I made it I just made a type 10 tank also
👍👍👍👍
Can u please tell me the measurements
Please give me the measurements
What materials you used plese tell
Watch this video to learn more please!
ruclips.net/video/ReMYMD6sjag/видео.html
Nice tank
welcome to vietnam
Hay quá 😄
T 34/76 tank rc cardboard
8:42 he's mad
Can u name the components please
Type of RC remote used
Motors used
That’s geared motor it can be found in robu.in
What is RC system name
Bro, please explain me that firing mechanism , what you have used. Please bro
Hello người anh em :))
You should paint is tank.😃😃
You do it