you have to have the ball joints inside the control arms with a tip rod sticking out so the wheel can stay straight all the timre look how a ball joint works youll see what i mean after that the wheel moves up or down it will stay sraight with no camber see the ball joint put in correctly will get rid of the camber
Bro please I need to buy one of these I used to make them when I was in Middle School. But the way you're making is so much better. 🙌🙌 Please bro I need one tell me how much
Thank you for watching and thank you for the great comment brother I go online and I just look up 1/25 scale lowrider wheels and they'll usually pop up for you
thank you so much for the vid bro ive been wanting to try to build one but didnt know how to make them hop.Do your cars roll and if so how do u do that ?thank you agian
@@eddieblcc you know most likely a 57 chevy but I'm not positive on that yet give me a couple days to look at what I got. So you live in Seattle but you grew up in watts. Ok I grew up in pacoima ,CA. In the valley. We will talk more next week Chester
@@eddieblcc Eddie whaupp! After a few days I think I want to do a 67 nova.i have a built one that I can disassemble I got into it on the cheap but it is pretty clean. Get at me . I don't want to leave my number on tube .I don't know if this is your personal email address. We will exchange those later so we can chop it up . Chester
I'm going to have to do a little research for you that's a hard one I figured out how to do it myself it's pretty easy it's just hard to explain I'm going to look out for you and see what I can do bro thank you for watching
@@eddieblcc oh okay by chance brotha do u have video? Or kno what it called been having trouble trying to fit it boss...n thanks for the reply man 👍🙏 ur models our dope brotha i build my first model with my son watchn ur videos! 💯🙏
Man you should do a whole video on how to make the air arms the telescopics pretty much the whole thing about switches because for people like myself I'm still trying to learn it and I still ain't got it man that would be cool if you did a full tutorial on how to build a arm hoppers a three-wheel and all that that would be cool bro
@@eddieblcc I second that. That’s my main issue. How to actually build the arms & cylinders & install them on the chassis. Would be greatly appreciated. Definitely nice collection I must say 👏🏾✊🏾
Very nice buddy. I'm having trouble with the telescope in the back I've been sitting trying to figure it out for awhile and had to step away. And for the switch box I believe you need a 6 point toggle switch no-on switch look them up on Ebay there pretty cheap. Awesome work looking forward to seeing it done. And hey send some of that rain my way lol
My next video I'm gonna try is very simple to do the hydraulics but it's kind of hard to explain it's a trip how it works man thank you for watching stay posted that video is coming
I've been using Johnson Motors for the Hop and the little blue circles that they sell on Amazon they're really cheap but they work great thank you for watching brother God bless
I'm using one of those square old school six volt batteries that go inside of the blinking lights that they put to delineate the streets they sell them at Walmart you get two for six bucks and they last for a long time just imagine they power the hazard lights on the street peace brother thank you it's called a lantern battery
It seems like something always break on them & thanks. I'm bout to put one together i have bought some but always had to do something to them before I could enjoy them. What's a piece of good advice you could give a beginner like me??
Make sure you use strong plastic for the a arms and use a good strong fishing line I used the one that's made out of material and not the one that's made out of plastic filament have fun building brother
Also never apologize for fingernails if you are a true model builder which I can see you are! That's what we do!! . If you have not ever went to bed or ate dinner with glue /paint on your fingers ? You are not a modeler? Young bro you are for real .
I don't know the name of them but they come from Michaels and they're not made out of regular hard steel these pins actually feel like they're made out of solder they're soft and the head of them is larger than normal pins they're very easy to notice but I found them at Michaels I tried to send you a picture but we can't send pictures over RUclips in our messages
I find little stuff like that on keychains from the Dollar tree or they're used on the drawstring to close blinds you can find those little things all over the place they're even at the hardware store they're like tub stopper chains trust me they got them
@@eddieblcc I honestly need some guidance on how to 3 wheel and the battery. The lil 9v square battery doesnt cut it when the engine and body are attached.
@@eddieblcc I seen that you used a big battery to lift the back up. What other battery did you use to hop the front? And for the the 3 wheel.....I'm just lost bro. I tried to use the ball technique so it can rotate but that seems to be a weak point the way I do it. Any kind of tension and it snaps
@@swapitout5728 I use only that battery I designed it to work that way, got it at Walmart 2 for 6 buccs. Geometry is involved lol go slow and remember one axle at a time and you will get it.
i’m working on my second build ever… my first was the 67 from AMT.. and now i’m working on the 63 with the drag option both are not hoppers… but i do have a spare 67 i wanna try to learn on
Nice work. I need to finish my 61 now.
Thanks for checking the video out
Nice ride!!!
Thanks for watching brother I appreciate you
you have to have the ball joints inside the control arms with a tip rod sticking out so the wheel can stay straight all the timre look how a ball joint works youll see what i mean after that the wheel moves up or down it will stay sraight with no camber see the ball joint put in correctly will get rid of the camber
U gets Down bro 💯
It's not that hard we all can do it brother God bless
Looking good over here bruh I'm gonna have to make a video for you HOP ⬆⬆⬆
Thanks for looking out Dre you know I learned most of this stuff from you big bro God bless
Bro please I need to buy one of these I used to make them when I was in Middle School. But the way you're making is so much better. 🙌🙌 Please bro I need one tell me how much
Just bought a 61 a few days ago,!
Very Cool!!! I'll be watching
Thank you for looking out peace ✌️
Where did you get those rims those are sick. I’m in California and it’s Pineapple Express. Raining for months haha. Can’t wait to paint.
Thank you for watching and thank you for the great comment brother I go online and I just look up 1/25 scale lowrider wheels and they'll usually pop up for you
Damn that thing would literally jump off the table. Great engineering
Thank you brother I'm trying I'm not the best though I appreciate your time and comment peace ☮️
thank you so much for the vid bro ive been wanting to try to build one but didnt know how to make them hop.Do your cars roll and if so how do u do that ?thank you agian
Eddie I'm a old school brother! Been building models since I was 9 yrs old. I'm 60 but I want a chassis built what will it take to get a deal done???
Hey brother thank you for watching a video what kind of car you thinking about building
@@eddieblcc you know most likely a 57 chevy but I'm not positive on that yet give me a couple days to look at what I got. So you live in Seattle but you grew up in watts. Ok I grew up in pacoima ,CA. In the valley. We will talk more next week Chester
@@chesterhawkins6147 ok brother tha ks again
@@chesterhawkins6147 I used to live out that way on Sherman Way smallworld yep North Hollywood been there too
@@eddieblcc Eddie whaupp! After a few days I think I want to do a 67 nova.i have a built one that I can disassemble I got into it on the cheap but it is pretty clean. Get at me . I don't want to leave my number on tube .I don't know if this is your personal email address. We will exchange those later so we can chop it up . Chester
I’m good at this now. 🎉🎉🎉
Happy holidays bro hate to bug u but do u kno if anybody has a step by step video on how to make the 2 stage cylinder
I'm going to have to do a little research for you that's a hard one I figured out how to do it myself it's pretty easy it's just hard to explain I'm going to look out for you and see what I can do bro thank you for watching
How did u make servo fit brotha? I have a 9g servo i have the 61 also please lmk 👍🙏
@@jayypeezy36 you going to have to trim it down to fit in the trunk I learned how to do it from watching other people videos
@@eddieblcc oh okay by chance brotha do u have video? Or kno what it called been having trouble trying to fit it boss...n thanks for the reply man 👍🙏 ur models our dope brotha i build my first model with my son watchn ur videos! 💯🙏
@@jayypeezy36 I don't I learned how to do it from watching Dre1only video
@@eddieblcc thanks brotha for replying back 👍🙏
@@jayypeezy36 no problem sometimes when I don't answer it's because I'm busy working
Man you should do a whole video on how to make the air arms the telescopics pretty much the whole thing about switches because for people like myself I'm still trying to learn it and I still ain't got it man that would be cool if you did a full tutorial on how to build a arm hoppers a three-wheel and all that that would be cool bro
Ok I'll try something out soon brother peace
@@eddieblcc I second that. That’s my main issue. How to actually build the arms & cylinders & install them on the chassis. Would be greatly appreciated. Definitely nice collection I must say 👏🏾✊🏾
@@dereed5991 I will bro thank you I'm getting ready so soon
The a arm video coming soon, I I'm going to make the video when I show this supernatural car update I didn't forget about your brother
@@eddieblcc thank you bro
That’s so cool. I made one some time ago not as good as yours .thanks for the tips i will try another one soon.
Thank you bro coming soon .lol
Very nice buddy. I'm having trouble with the telescope in the back I've been sitting trying to figure it out for awhile and had to step away. And for the switch box I believe you need a 6 point toggle switch no-on switch look them up on Ebay there pretty cheap. Awesome work looking forward to seeing it done. And hey send some of that rain my way lol
A telescopic cylinder video coming soon thanks for watching bro peace ✌️
question my g would you ever consider doing a full step by step guide on how to build the full hydraulic system ?
My next video I'm gonna try is very simple to do the hydraulics but it's kind of hard to explain it's a trip how it works man thank you for watching stay posted that video is coming
what motors do you use eddie🤔
I've been using Johnson Motors for the Hop and the little blue circles that they sell on Amazon they're really cheap but they work great thank you for watching brother God bless
Question 🙋🏾♂️ what size battery are using for the hopping??? 🤔🤔🤔
I'm using one of those square old school six volt batteries that go inside of the blinking lights that they put to delineate the streets they sell them at Walmart you get two for six bucks and they last for a long time just imagine they power the hazard lights on the street peace brother thank you it's called a lantern battery
@@eddieblcc Thank you
Yo ddieblcc! Good to see you making vids again man! I got back into building again myself. Good looking out on the tips man!
Thank you brother winter is perfect for building peace man.
That’s crazy man.
Thanks I appreciate you ☺️
How many volts do you use???
I just use six volts so that everything don't start breaking thank you for asking brother
It seems like something always break on them & thanks. I'm bout to put one together i have bought some but always had to do something to them before I could enjoy them. What's a piece of good advice you could give a beginner like me??
Make sure you use strong plastic for the a arms and use a good strong fishing line I used the one that's made out of material and not the one that's made out of plastic filament have fun building brother
@@eddieblcc thanks & I will. Are you on Instagram? & If so what's your name on there
I got you after work
Yo where can I buy the ball joints at?
I buy the little tub stoppers with the chain and ball on it from home Depot or any hardware supply store you can even find them on keychain sometimes
@@eddieblcc thanks man, it it possible for you to also make a video on how to make the back of the car go up? I want to learn but can’t figure it out
can you do a tutorial on how to string the motors
Coming soon brother peace ✌️
I would like to purchase one of these cars .
It's possible ☺️
Also never apologize for fingernails if you are a true model builder which I can see you are! That's what we do!! . If you have not ever went to bed or ate dinner with glue /paint on your fingers ? You are not a modeler? Young bro you are for real .
Eddieblcc hope all is well brother. Question for u & the viewers, what’s the name of the pins u are using to connect the trailing arms to the frame?
@7:39-7:44 ?
I don't know the name of them but they come from Michaels and they're not made out of regular hard steel these pins actually feel like they're made out of solder they're soft and the head of them is larger than normal pins they're very easy to notice but I found them at Michaels I tried to send you a picture but we can't send pictures over RUclips in our messages
@@eddieblcc okay thank u brother
Thank you for all the tips. Where are those wheels from?
Thank you there from pegasus model detail parts
Would you sell a car in the condition you have here on this video?
Definitely bro peace
@@eddieblcc I’m interested in buying one with suspension, rear-end and arms installed only. Would you sell one to me?
@@johnnych1ngas what kinda car you thinking about doing
@@eddieblcc that 61 impala you show, 1962 impala (revel), 1965 impala (foose edition) or 1970 Monte Carlo(AMT)
@@johnnych1ngas ok I'm working on it . I'll hit you up thanks again
Yo E where do you get the chain and ball joints from?
I find little stuff like that on keychains from the Dollar tree or they're used on the drawstring to close blinds you can find those little things all over the place they're even at the hardware store they're like tub stopper chains trust me they got them
Thanks man I appreciate that? Do you also use mini servos or do u recommend straight up motors?
One more ? Fam where can I get the switch box and real looking switch handles from I love that
@@bri-bbri-bmusic3066 servos and motors baby boy got to do it right servos to the back straight motors to the front
Damn I just found some chains with that snap on that I think you use for ball joints any cool video on how to install it
I sell them 2 switch boxes and 3 switch boxes... I have them made already
Do u have a fb brotha?
What's ur Facebook brotha? I need some a arm help if u can help me brotha 🙏
Is there anyone that I can buy kits built from
How much for u to build one for me?
Do you have a ig bro
Yeah I do is it something I can help you with brother 😊
@@eddieblcc I honestly need some guidance on how to 3 wheel and the battery. The lil 9v square battery doesnt cut it when the engine and body are attached.
@@swapitout5728 ask away
@@eddieblcc I seen that you used a big battery to lift the back up. What other battery did you use to hop the front? And for the the 3 wheel.....I'm just lost bro. I tried to use the ball technique so it can rotate but that seems to be a weak point the way I do it. Any kind of tension and it snaps
@@swapitout5728 I use only that battery I designed it to work that way, got it at Walmart 2 for 6 buccs. Geometry is involved lol go slow and remember one axle at a time and you will get it.
What's your email address or your ig account bro. I can help you with the switch box. I need help with the rear end.
Do you have messenger
eddieblcc@gmail.com
@@eddieblcc I think I just hit you on face page messenger bro
I'm eddie parotte oñ face book
maaan u got instagram or fb… i need a step by step
Oh but I will answer a few questions for you if that's cool thanks for watching God bless
@@eddieblcc i need a step by step from start to finish on how to even begin to start this process.. been trying to find one but no luck 😂😂
i’m working on my second build ever…
my first was the 67 from AMT..
and now i’m working on the 63 with the drag option both are not hoppers… but i do have a spare 67 i wanna try to learn on