For those of you wondering what would happen if you brought something like this into a dealer. Once you flash your car and get the screen you're looking for, you might get a CEL. I'm currently working on. Charger R/T that did this to get the hellcat logo and his car came up with 18 DTCs directly related to this flash. It will not cause drivability issues however, just an annoying CEL. The CELs were something about voltage issues since the car now thinks it's a Hellcat.
What year charger, they have info posted on Known issues with the tazer on some models Check their FAQ www.zautotech.com/docs/Tazer%20FAQs.pdf Did you happen to enable SRT mode?
I believe it was a 15 or 16. Ultimately in the end we had to flash the ecu back to factory since the customer wanted that CEL off. I've read up a bit about this product and personally it seems to be gimmicky for lack of a better word, but I only came to drop my two cents since I see this kind of thing every now and then.
I admit the feature shown in this video is gimmicky at best, but for some who purchased early 15 Scat Packs I'm a little surprised the dealer could not flash mine to display the bee. The Tazer does have some serious meaningful functionality, it was originally developed to remove traction control and provide line lock. Branching off the racing functionality they have added fan control (runs fan with engine off to cool while staging) they have also added Inter cooler pump for the hellcats. All with battery protection etc... It's got a lot of great functionality along with a bunch of features to cater to the masses.
The dealership is at the mercy of Mopar and Mopar says we have to fix a car to factory standards, there is no other option unfortunately. It's a pain for both sides sometimes. As far as the tazer goes, I guess if my customer didn't try and make they're R/T think it was a Hellcat and stuck with options the R/T could handle then I think everything would've been fine. I too have something similar to the tazer and if i check boxes my car can't support i throw codes too.
I just bought 15 scatpack charger and instead of the bee it has the hellcat and srt pages. Does that mean the previous owner used the tazer flash on it?
Doesn't work with my scat pack 2016? Is there any conditions for miles and after you can change Splash screen? I did the exact same step nothing change. Please advise.
Do you have the latest firmware installed on your TaZer? This feature was available after the December 2016 release. My taZer playlist has all the info on connecting and upgrading the TaZer ruclips.net/p/PL_C69kho0QAsj7tH68odU4XmCwonbZuYE
i am now playing around a few days with the app AlfaOBD icm ELM327, this can also enable A LOT of stuff, like performance pages, global windows down etc etc
Hi, I have a 2016 RT/SCATPAK and I tried all the things that were said in the video, except one thing I found out which was what made it work on my screen; If you have a reboot that comes up in that line of options put it on yes and reboot then it will work. At least it did on mine.
This only works if you have the zAutomotive TaZer installed using the Double Bypass? zautomotive.com/product/tazer/. This video is on my 2015, you will want to check with zAutomotive if the desired splash screen works on your 2018 model.
Dang, that's what I was hoping they could fix. I just ordered the Tazer and I'm gonna use the SRT pages (mainly to get Track Mode for the A8) and I wanted to keep the Bee. Oh well, no bee for me.
the first time you plugged in the tazer and went to the splash screen option was it scat or none. I just got the tazer and it said scat but I have never had the bee. The setting from the first time I looked at it was scat. My scat is one of the early ones also but I can't get it to turn on I have tried all the different screens and still only get the Challenger start srceen
After you set it to scat did you turn off the car and leave with the keys for about a minute? I needed to follow those steps to reset the EVIC, then the bee appeared. Sadly I have heard the bee not working for some, if you are one of those people please contact their support on the website,.
the frist time i saw the splash screen in the menu it was already on SCAT. I tried changing it to all of the other options(none shaker and hellcat) each time I would turn off the car and take the FOB out of the cat for 4 or 5 minutes every time it would be the basic challenger start screen even on NONE.
There are 2 feature sets for the Tazer. You can make changes and pull it out. But if you want to use any of the live features outlined in the use manual you need to leave the Tazer connected.
im hoping i can get some clarification, I bought a certified used 2016 challenger scat pack from a dodge dealer, and i just saw this video. When i start my car I get the scat bee on my splash screen. Does that mean that the previous owner had a tazer and changed the splash screen and the dealer never flashed it back to factory settings??? wonder if this car had a previous tune and never flashed it back to factory settings.
Early 2015 Scat packs like mine only had the Challenger splash screen. Your 2016 is a Scat Pack Shaker so you should have the "Shaker" splash screen UNLESS your car came with the Scat Pack appearance group. This can be confirmed by the bee embroidered in the seats, black fuel door, hectic mesh interior. If you have the Scat Pack Appearance group you should have the Bee splash screen You can also check your window sticker by using Chrysler's VIN tool www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin= just click the link and add your full VIN number to the end of this URL, then hit enter Hope that helps
I have 485hp 6.4 and i walked a hellcat and i have manual. I also have HEAVY weight reduction. No reason the car should be that heavy 😂🤙 no need for it to have 707hp either. Im at the gas station plenty already, spend more time putting gas than driving 😂😂😂 i want to be able to drive nice and not chug fuel
Niiiiice.... does the bee splash screen disappear when you disable the tazer??? can i have a friend set it up one time with his tazer just to get the bee splash screen in my 2016 scat pack challenger or do you have to keep the tazer connected to continue to get the bee logo on the splash screen???
You don't need the Tazer plugged in for the bee to continue working BUT! you must un marry the tazer and return your car to the stock settings before you can use the tazer to change settings in another vehicle.
Why do you say you will have to change all of these changes back when take the car to the dealer for service? Why do they care if there is a Bee or something else on the startup screen?
It's best to restore all settings and remove the device this will put the car back to the stock condition so the mechanic can diagnose any issues without having to figure out what the TaZer is and any settings it changed. Use of the device does not void the warranty, for more info on Warranty see the FAQ www.zautotech.com/docs/Tazer%20FAQs.pdf
hello, I have a 2019 challenger R/T. I was thinking about putting a hellcat cluster in it. If I purchase this Tazer, will I be able to switch to a hellcat slash screen or other logos, considering its a R/T? Or can I purchase the Tazer & do it with my stock R/T cluster, instead of buying a hellcat cluster. Please let me know. Thanks
Tazer Settings. Can you provide me with the original setting for a 2016 Dodge Challenger Scat Pack 392 6 speed. Had them written down but can't find them. Thanks
The scat pack does not have an adjustable suspension installed so it will not adjust suspension settings. It's great for the M6 if you plan to use Line lock, Light show, Nav adjustment in motion, use aux inputs unlock SRT pages, change splash screen, adjust DRLs, use shift light, and more...
Disable SRT mode the airbag warning will go away shortly, not sure if it's fixable because none of the SRT features work in the 5.7 From the F.A.Q. If you have a 2015/2016 Charger 3.6 or 5.7, setting SRT will result in an airbag error. Nothing unlocked in SRT mode works on the 3.6/5.7, so no reason to enable SRT on these cars. You can still get all the EVIC performance pages and add sport mode if you don’t already have it.
I have a 17 Charger Daytona 392 and the splash screen is weak. I tried your process but nothing happened. I noticed you mentioned Tazer. So I need the Tazer in order to make changes? If so, can you give me more info on the Tazer?
Last Wednesday I popped it into Track Mode for the first time. In the Scat Pack M6 I only had the option to adjust the steering for track. The most noticeable difference was the exhaust. I drive in Sport all the time, the throttle response and steering feels similar to Sport Mode. Possibly a little more aggressive, but it may just be the Butt dyno placebo effect.
got it from www.proclipusa.com you can use their easy wizard to get the mount for your car and the holder for your phone. perfect fit. Here is my review on it. ruclips.net/video/b-ezTSJP2eg/видео.html
You don't need to it's just best to have your car back to stock so a tech can focus on your issue rather than what the TaZer is and what it may be doing... The latest version that released tonight has a very cool one press return to stock, I release 2 new videos on the upgrade and use of it. Check this one out. ruclips.net/video/JokQyDIb-ZU/видео.html
hi any one can help please may car 2017 dodge charger rt 5.7 l how i can fix airbag light on after i use zAutomotive which option you have to disable to turn the air bag light of
not necessarily, there are laws in place to protect us from the dealer blatantly denying warranty. check out the "magnuson moss warranty act" for more info
Hey, I have a 2016 SCAT Pack with a challenger logo. I tried to get into the menu as shown in the video and failed. Is there a reason I couldn't see the options while holding the left arrow and tapping cancel? Please do reply. Mine is a stick shift, if that make any difference.
+Vishnu Dev are you talking about the logo menu or the actual taser menu for all the options? If it's just for the logo you may have an older version check out my video on upgrading the firmware. The later firmware has that option added.
You may need to reach out to techsupport@Zautotech.com , that option should be in the menu after "Set Shift Light" it's for 2015 and 2015 Challengers and Chargers so your car is correct. The only thing I can think of is if you have SRT enabled then you will only get the option to select Challenger or Hellcat. He does note (***This is a new feature, and may not display on some cars.)
yes sir, the TaZer works on the R/T and you get a ton of features. Check out the feature chart at the bottom on the FAQ > www.zautotech.com/docs/Tazer%20FAQs.pdf
I have tried to enable the scat screen but its a no go. I have the SRT off and I scroll to the splash screens and no matter which screen I select the dash defaults back to the plain Challenger splash. I sent an email to the tazer company but have not received a response. Any Ideas? Getting the scat splash was the reason I bought the tazer and I have installed the latest firmware. Thanks in advance.
SRT off and Drive mode off. For me once I set the splash screen to Scat the dash resets but does not show. 2:22 I needed to turn off the car, get out, close the doors and walk away for 30 seconds. Then when I came back and started the car the Scat bee was there. The first time enabling the scat bee requires a full reset.
The TaZer firmware is updated often and this feature was added in the last release, you should check and update the device. This video shows you how to see if you have the latest version ruclips.net/video/j4zQHcnh1hs/видео.html
I have two question! I have a Durango RT!!! I heard I’d you flash it with the tazer you can get the SRT performance page. Right? If so say I get a 6.4 swap I won’t need a new PCM or need to have it tune. Right?
@@WorkPlayDrive my 2017 airbag light still came on and my hellcat still have this charger symbol covering it here in 2022 😆. So no srt splash and I can keep.my p pages? Right?
Just bought my scatpack today I been waiting for this moment more than a year. For some reason I can't get this to work in my car. Do I need to update something on the car first?
Only the best investment ever.... I have a 1 year review on this coming soon! 2015-2016 Dodge Challenger Sto-N-Sho Removable Take Off Front License Plate Frame Bracket amzn.to/2goV3gV
+Somedaysuperhero yup the Tazer, and no worries they know where some of their purchases come from. The owner now has my videos up on his site to help people. 💪
I watched your video on the MFR it's all you were buds with rt life. Are you a Jersey Boy? I live down by Long Beach Island and I've got a ton of questions for you. Will the taser void the warranty on my 2016 Scat Pack charger? My next question why only 275 tires? I'm getting ready to order wheels for my car and I do not want them hitting so I'm ordering the Hellcat replica as that's what was on my car when I got it I have the 20 by 9.5 stock from the factory. 245. I'm thinking seriously about going to Mickey Thompson 305 on the back and I think they're Mickey Thompson 305 45 20 I'm not mistaken as I was told that these would fit on the car with a 25 offset on the Wheel by the way and not have any rub issues. Believe it or not I've only ever jumped on the car to times since owning it and she is my daily driver. Will next to RT life and B Mason in the Hemi dude you're right up there very informative videos am I'm an old Street racer from back in the E-Town days. And a Chevy guy. I'm old enough to be retired but I'm not ready to be retarded. so Jersey boy if you got any meets going on in the area and maybe one day we'll meet cuz I would love to have a conversation with you but any inside you can give me on the warranty issues with the taser as I love that line lock feature. And now that I know I will not lose my Super Bee on the dash I'm more apt to do buy it I think some of the videos I saw said that your B would disappear and I you I just love that fucking be I just got the new 2019 Super Bee 392 Challenger emblems I'm taking my Fender emblems off and replacing them they're truly awesome and we're worth the 80 bucks okay this is probably way lengthy and I'll apologize for that and I'll also apologize for any mistakes as I talk text you really don't think I'd type all this now do you LOL your MFR code doesn't work and I really would like to put these on my car
+Shaya K t the srt load out includes it's own splash screen so it can't be changed to the bee. I'm not sure if you can turn off all the SRT features then turn the bee on, but that would be silly
i'm actually trying to change it into a hellcat logo, problem is i tried this method to enter to the menu system but i couldn't get into it at all so i'm guessing this method won't work on srt ?
It may also be the Version you are using. The splash screens were added recently, so this menu is not available prior to i believe TaZer firmware version 2.2.6. You can check the firmware by continuing to hold the Left arrow and hit cancel. The version will display it's one of the last screens. If you need to upgrade I just put out a video on how to do it, enjoy ruclips.net/video/JHFQir6N0x0/видео.html
I have an automatic I took the rims back off I got tired of racing people on my way 2 work lol and the Rims in due time will mess up my car . One of the reasons I want to get the tazer is because I want that B logo as well
Check your firmware make sure you have the latest version. The ability to change the splash screen is in the latest release(Firmware Version 2.2.5 - 081616). you can check your firmware on the PC or when you scroll through the Menu.
Love you’re work, was asking myself why didn’t this guy just buy a Shaker. But I realized when you love cars you may wanna do your own version of a shaker. Seeing that I am considering getting a Shaker. I want to ask, is it possible to buy the Scat Pack speed o meters? Not too found of the white that Dodge died with the Shaker.
Hey, are you saying you have the TaZer menu, but NOT the option to change the splash screen? If so you need to upgrade your TaZer Firmware the splash screen option was was recently added in the last version. The version in this video will add that menu option along with the ability to map the AUX buttons AND custom light shows. ruclips.net/video/JHFQir6N0x0/видео.html let me know if that helps...
Lol, yup you need to buy the TaZer to get this and a bunch of other options. here is the link check it out www.zautotech.com/tazer.html I have a few videos on the TaZer and a lot more coming
For this specific change nope you can unplug after making the change. Note: some other Tazer functions like line lock, light show, nav in motion, etc do require the tazer.
Has anyone tried this on a Charger Scat Pack? I can't get the Bee back following these instructions in my Charger. I like the SRT modes but I want the Bee splash screen back again.
Will Gammelgaard due to the fonts and load out screens in SRT mode you cannot have the bee while it's enabled. I love SRT mode so I give up the 🐝 from time to time
Thanks ! I go on their website and update it with that firmware from Dec 2016? But I just got my tazer yesterday and it should have it be up to date right ?
Yeah it should be up to date. Use the contact link to reach out to them to see what's up. Just give them a day to respond I just saw them at Spring Fest #SF12 in California this weekend. So he's probably traveling now.
Change it to the Hellcat, wait 15 minutes and open the hood, see if a Supercharger appears! :-P
I tried but it’s not available in this version of the firmware 😜
Just what I thought the Hellcat option is just a software update!
At least scatpack has a bigger engine then the hellact 🙂
Lol
Also those forged internals for that 6.4L so it doesn’t blow tf up 😂😂
YOU ARE THE MAN! I FORGOT ALL ABOUT UPGRADING MY TAZER, UNTIL I RAN INTO YOUR CHANNEL. THANKS BUDDY:)
No problemo !
For those of you wondering what would happen if you brought something like this into a dealer. Once you flash your car and get the screen you're looking for, you might get a CEL. I'm currently working on. Charger R/T that did this to get the hellcat logo and his car came up with 18 DTCs directly related to this flash. It will not cause drivability issues however, just an annoying CEL.
The CELs were something about voltage issues since the car now thinks it's a Hellcat.
What year charger, they have info posted on Known issues with the tazer on some models Check their FAQ www.zautotech.com/docs/Tazer%20FAQs.pdf Did you happen to enable SRT mode?
I believe it was a 15 or 16. Ultimately in the end we had to flash the ecu back to factory since the customer wanted that CEL off.
I've read up a bit about this product and personally it seems to be gimmicky for lack of a better word, but I only came to drop my two cents since I see this kind of thing every now and then.
I admit the feature shown in this video is gimmicky at best, but for some who purchased early 15 Scat Packs I'm a little surprised the dealer could not flash mine to display the bee.
The Tazer does have some serious meaningful functionality, it was originally developed to remove traction control and provide line lock. Branching off the racing functionality they have added fan control (runs fan with engine off to cool while staging) they have also added Inter cooler pump for the hellcats. All with battery protection etc...
It's got a lot of great functionality along with a bunch of features to cater to the masses.
The dealership is at the mercy of Mopar and Mopar says we have to fix a car to factory standards, there is no other option unfortunately. It's a pain for both sides sometimes.
As far as the tazer goes, I guess if my customer didn't try and make they're R/T think it was a Hellcat and stuck with options the R/T could handle then I think everything would've been fine. I too have something similar to the tazer and if i check boxes my car can't support i throw codes too.
Just started viewing your videos. A great contribution to the community. Thanks!
Thank you for the kind words!
So, does the tazer have to stay plugged in for this option to stay active or can you disconnect it and still have the bee ?
This change does not require the tazer to remain plugged in.
I have a 2019 Scat Pack Charger, and it doesn't go into the menus when you hold left and press cancel.
I just bought 15 scatpack charger and instead of the bee it has the hellcat and srt pages. Does that mean the previous owner used the tazer flash on it?
Doesn't work with my scat pack 2016? Is there any conditions for miles and after you can change Splash screen? I did the exact same step nothing change. Please advise.
Do you have the latest firmware installed on your TaZer? This feature was available after the December 2016 release. My taZer playlist has all the info on connecting and upgrading the TaZer ruclips.net/p/PL_C69kho0QAsj7tH68odU4XmCwonbZuYE
i am now playing around a few days with the app AlfaOBD icm ELM327, this can also enable A LOT of stuff, like performance pages, global windows down etc etc
I’ll check it out sounds interesting
Hi, I have a 2016 scat pack and I don't have it. do i have another radio?
Does the font on your screen change? Does the MPH come in the SRT font behind the wheel?
Can u do this with the 2007 superbee
So I need the tazer to switch my splash screen
Hello, i followed all your istructions but nothing happend, mi challenger is sxt 2016, can you help me?
sorry way too many options on what could have been missed. Have you contacted support?
Hi, I have a 2016 RT/SCATPAK and I tried all the things that were said in the video, except one thing I found out which was what made it work on my screen; If you have a reboot that comes up in that line of options put it on yes and reboot then it will work. At least it did on mine.
I tried this on my 2018 ScatPack and followed all steps, wouldn't do it. Am I missing something?
This only works if you have the zAutomotive TaZer installed using the Double Bypass? zautomotive.com/product/tazer/. This video is on my 2015, you will want to check with zAutomotive if the desired splash screen works on your 2018 model.
Any luck changing to the bee splash screen on the 18 charger?
Link to a taser ?
can the tazer activate a shift light? i understand that srt's have a shift light
Yes, I'll check it out to confirm it works on the Scat Pack and make it one of my videos for next week.
Yeah it works I believe as long as the SRT pages/drive modes are enabled. I have it on my charger scat but I'm not sure which setting activates it
They do, I have it setup on my ScatPack
Nice, Shift light is this week, I need it ready for Friday night!
Man that's what I need to do. Go to the track one night.
In the 2022 can u change the speed metaphor color in the settings
Ok, if you change the splash screen to the Bee Logo, will you still be able to use the SRT Pages (Track Mode and ect)?
nope, not at this time the SRT pages overwrite the bee.
Dang, that's what I was hoping they could fix. I just ordered the Tazer and I'm gonna use the SRT pages (mainly to get Track Mode for the A8) and I wanted to keep the Bee. Oh well, no bee for me.
well, on the bright side you can switch back and forth, Fun mode and Bee mode! Hopefully a future update will work this out.
Work Play Drive
Cool. Thanks for the info!
No problemo!
How can I get this on my 2019 scatpack
Yeah, unfortunately you can only have either the bee or the srt drive modes as of now.
my 2015 scat pack will not change the splash screen,
the first time you plugged in the tazer and went to the splash screen option was it scat or none. I just got the tazer and it said scat but I have never had the bee. The setting from the first time I looked at it was scat. My scat is one of the early ones also but I can't get it to turn on I have tried all the different screens and still only get the Challenger start srceen
After you set it to scat did you turn off the car and leave with the keys for about a minute? I needed to follow those steps to reset the EVIC, then the bee appeared. Sadly I have heard the bee not working for some, if you are one of those people please contact their support on the website,.
Thanks for the answer. I enjoy your videos. By the way where are the steps to reset the EVIC?
Thank you, I go over that at 2:25
the frist time i saw the splash screen in the menu it was already on SCAT. I tried changing it to all of the other options(none shaker and hellcat) each time I would turn off the car and take the FOB out of the cat for 4 or 5 minutes every time it would be the basic challenger start screen even on NONE.
You may need to contact TaZer support to see if your car is one of the models that may not be able to display the bee.
Do the tazers work on a 2019 challenger scat pack to change the splash screen?
This feature works on 2015 ½ -2018s according to the user manual.
i have a 5.7l Hemi shaker...I'm guessing I cant get the Bee or the Hellcat splash screen with the Tazer?
as long as it's a 2015 and up you're good to go.
thanx, i was under the impression I had to have the scatpack to change the screen.
You can drop the hellcat Splash on there if needed
So do you have to leave the tazer plugged in at all time?
There are 2 feature sets for the Tazer. You can make changes and pull it out. But if you want to use any of the live features outlined in the use manual you need to leave the Tazer connected.
will these work on the 2019 Dodge Charger R/T SCAT PACK
Did it work , I couldn’t get it to ?
Didnt work on my 2016 scat
Just installed and works on my 2019 rt
You have to install with bypass in the backseat.
Hemi Da Key2pwr My 2019 Scat already has this on the screen
are you able to keep all of the srt features with the scatbee as your splash screen?
nope, Dodge does not have the scat bee in the SRT load out so when you enable it the Bee is gone.
thanks for the confirmation
Didn't work on my 2017 T/A 392 challenger 😔
No idea if you still anwser questions. But I was wondering what hood and shaker package that was? I want to do a shaker hood as well! Thanks
Mine was a Cervinis and I really loved it check out this video. ruclips.net/video/lYPMn7CYv04/видео.html
im hoping i can get some clarification, I bought a certified used 2016 challenger scat pack from a dodge dealer, and i just saw this video. When i start my car I get the scat bee on my splash screen. Does that mean that the previous owner had a tazer and changed the splash screen and the dealer never flashed it back to factory settings??? wonder if this car had a previous tune and never flashed it back to factory settings.
Early 2015 Scat packs like mine only had the Challenger splash screen.
Your 2016 is a Scat Pack Shaker so you should have the "Shaker" splash screen UNLESS your car came with the Scat Pack appearance group. This can be confirmed by the bee embroidered in the seats, black fuel door, hectic mesh interior. If you have the Scat Pack Appearance group you should have the Bee splash screen
You can also check your window sticker by using Chrysler's VIN tool www.chrysler.com/hostd/windowsticker/getWindowStickerPdf.do?vin= just click the link and add your full VIN number to the end of this URL, then hit enter
Hope that helps
Work Play Drive thanks
@WorkPlayDrive my 2015 shaker has the bee.
If you put the Hellcat in ? Does it now have 707 HP ? LOL Thank-you good to know.
😂😂
Very funny
Wouldn’t that be sweet 😂
I have 485hp 6.4 and i walked a hellcat and i have manual. I also have HEAVY weight reduction. No reason the car should be that heavy 😂🤙 no need for it to have 707hp either. Im at the gas station plenty already, spend more time putting gas than driving 😂😂😂 i want to be able to drive nice and not chug fuel
Niiiiice.... does the bee splash screen disappear when you disable the tazer??? can i have a friend set it up one time with his tazer just to get the bee splash screen in my 2016 scat pack challenger or do you have to keep the tazer connected to continue to get the bee logo on the splash screen???
You don't need the Tazer plugged in for the bee to continue working BUT! you must un marry the tazer and return your car to the stock settings before you can use the tazer to change settings in another vehicle.
Why those zautomotive keep you’re airbags system warning lights on ?
Did you enable SRT mode on a v6 or R/T?
Why do you say you will have to change all of these changes back when take the car to the dealer for service? Why do they care if there is a Bee or something else on the startup screen?
It's best to restore all settings and remove the device this will put the car back to the stock condition so the mechanic can diagnose any issues without having to figure out what the TaZer is and any settings it changed. Use of the device does not void the warranty, for more info on Warranty see the FAQ www.zautotech.com/docs/Tazer%20FAQs.pdf
hello, I have a 2019 challenger R/T. I was thinking about putting a hellcat cluster in it. If I purchase this Tazer, will I be able to switch to a hellcat slash screen or other logos, considering its a R/T? Or can I purchase the Tazer & do it with my stock R/T cluster, instead of buying a hellcat cluster. Please let me know. Thanks
For the 2019 you would need to reach out to ZAUTOMOTIVE to confirm. Sorry I don’t have access to the 2019 RT to test.
Why would you need to change your settings back before a service? It's not like what you did was a performance mod.
I dont think it works with v6 base model
Thank you! Please keep your excellent videos coming!
Hi, I want to swap my Hellcat instrument cluster to the new 220mph red-eye. Do you think it's possible? What about speedometer calibration?
You will want to contact Zautomotive support directly for that question.
Hello, does the challenger Gauges come with the so called ‘Tazer’ or do I have to buy it seperate?? I’m looking forward to doing this on mine
Will this work on my 19 scatpack?
Tazer Settings. Can you provide me with the original setting for a 2016 Dodge Challenger Scat Pack 392 6 speed. Had them written down but can't find them. Thanks
This doesn't work in my 2016 Scat Pack
Kinda wonder why they don’t have a Demon splash screen
NeedForSpeed2004 The TaZer just gives you access to what already exists on the cars programming.
Work Play Drive makes sense
Hello do you know if this work in a Charger gt? Or it has to be srt & scat pack models only. Thank you’!!
Wait, so i can do that with any stock challenge, even V6?!
Yeah
Will Tazer help to make the suspensions in comfort mode for a 2016 scat pack challenger 6 speed? Is Tazer worth for a 6 speed?
The scat pack does not have an adjustable suspension installed so it will not adjust suspension settings. It's great for the M6 if you plan to use Line lock, Light show, Nav adjustment in motion, use aux inputs unlock SRT pages, change splash screen, adjust DRLs, use shift light, and more...
Thanks for the quick response. Appreciate that.
Is there anyway to put the 2019 sp splash screen on a 2018 sp model?
I did this on 2016 charger rt,and i get a airbag light on. Have they resolved this issue?
Disable SRT mode the airbag warning will go away shortly, not sure if it's fixable because none of the SRT features work in the 5.7
From the F.A.Q.
If you have a 2015/2016 Charger 3.6 or 5.7, setting SRT will result in an airbag error. Nothing unlocked in SRT
mode works on the 3.6/5.7, so no reason to enable SRT on these cars. You can still get all the EVIC performance
pages and add sport mode if you don’t already have it.
Im so doing this to my challenger I didnt know I could do this, this is super cool!
Did it work for you
@@uhmeizuhngralphf0549 No I misunderstood I think you need a plug in software that's what the Tazer is
@@Official_Sketto yes it’s $200 bucks
Do they have one for the Rallye?
I have a 17 Charger Daytona 392 and the splash screen is weak. I tried your process but nothing happened. I noticed you mentioned Tazer. So I need the Tazer in order to make changes? If so, can you give me more info on the Tazer?
Congrates on the Daytona I just saw one for the first time last weekend awesome ride. Got some great photos imgur.com/a/N3P4e
Thanks for the info.
Great pics, thanks.
Did you try track mode and/if so can you feel a difference in sport and track mode
Last Wednesday I popped it into Track Mode for the first time. In the Scat Pack M6 I only had the option to adjust the steering for track. The most noticeable difference was the exhaust. I drive in Sport all the time, the throttle response and steering feels similar to Sport Mode. Possibly a little more aggressive, but it may just be the Butt dyno placebo effect.
Where did you get that cell phone holder?? I cant find one that fits right.
got it from www.proclipusa.com you can use their easy wizard to get the mount for your car and the holder for your phone. perfect fit. Here is my review on it. ruclips.net/video/b-ezTSJP2eg/видео.html
Does this work for the 2013 charger / 2018 challenger speed cluster to put shaker
Why do you need to change the Bee setting back when you turn it into the dealership?
You don't need to it's just best to have your car back to stock so a tech can focus on your issue rather than what the TaZer is and what it may be doing... The latest version that released tonight has a very cool one press return to stock, I release 2 new videos on the upgrade and use of it. Check this one out. ruclips.net/video/JokQyDIb-ZU/видео.html
hi any one can help please
may car 2017 dodge charger rt 5.7 l
how i can fix airbag light on after i use zAutomotive which option you have to disable to turn the air bag light of
I wish I could put the bee on my scat pack . I don't like having the cat or demon on the screen
If you don't rest to factory can the dealer not cover the electric components or computer chip
not necessarily, there are laws in place to protect us from the dealer blatantly denying warranty. check out the "magnuson moss warranty act" for more info
Mine wont let me...updated it too.. And theres no splash option
I try this on my 2019 Dodge charger scatpak and nothing happen
How do u make a hellcat screen pop up as a demon??
can you change splash screen on a 2013 charger with tazer
nope sorry only 2015+
Hey, I have a 2016 SCAT Pack with a challenger logo. I tried to get into the menu as shown in the video and failed. Is there a reason I couldn't see the options while holding the left arrow and tapping cancel? Please do reply. Mine is a stick shift, if that make any difference.
+Vishnu Dev are you talking about the logo menu or the actual taser menu for all the options? If it's just for the logo you may have an older version check out my video on upgrading the firmware. The later firmware has that option added.
I have checked the version and its up to date. yea am talking about the logo menu.
You may need to reach out to techsupport@Zautotech.com , that option should be in the menu after "Set Shift Light" it's for 2015 and 2015 Challengers and Chargers so your car is correct. The only thing I can think of is if you have SRT enabled then you will only get the option to select Challenger or Hellcat. He does note (***This is a new feature, and may not display on some cars.)
OK...il talk to them
it didn't work on mine either😞
this doesnt work on R/T's does it?
yes sir, the TaZer works on the R/T and you get a ton of features. Check out the feature chart at the bottom on the FAQ > www.zautotech.com/docs/Tazer%20FAQs.pdf
Wish they had one for the Daytona 392 😢
I don't think the dealer would bitch if you change your splash screen ... or would they ?
It's always best to put it back to stock before you take it to the dealer. This way they are focused on your issues rather than any mod you have done.
I have tried to enable the scat screen but its a no go. I have the SRT off and I scroll to the splash screens and no matter which screen I select the dash defaults back to the plain Challenger splash. I sent an email to the tazer company but have not received a response. Any Ideas? Getting the scat splash was the reason I bought the tazer and I have installed the latest firmware. Thanks in advance.
SRT off and Drive mode off.
For me once I set the splash screen to Scat the dash resets but does not show. 2:22 I needed to turn off the car, get out, close the doors and walk away for 30 seconds. Then when I came back and started the car the Scat bee was there.
The first time enabling the scat bee requires a full reset.
Work Play Drive .....thanks, I've followed the directions to the T allowing a full reset but still no scat.
might be time to contact Tech support :( www.zautotech.com/contact.html
Will the new updates fix the airbag code ?
I have a tazer but idk why mine doesn't offer that option in the menu
The TaZer firmware is updated often and this feature was added in the last release, you should check and update the device. This video shows you how to see if you have the latest version ruclips.net/video/j4zQHcnh1hs/видео.html
I have two question! I have a Durango RT!!! I heard I’d you flash it with the tazer you can get the SRT performance page. Right? If so say I get a 6.4 swap I won’t need a new PCM or need to have it tune. Right?
The Tazer only changes the display, if you do an engine swap you will still need to reprogram
Where you get that backup camera??
For some reason, the airbag light comes on, if you put it in SRT mode on a RT. Any ideas why?
This is mentioned in their manual can’t put SRT mode or splash screen on the 15/16 R/T
@@WorkPlayDrive my 2017 airbag light still came on and my hellcat still have this charger symbol covering it here in 2022 😆. So no srt splash and I can keep.my p pages? Right?
Just bought my scatpack today I been waiting for this moment more than a year. For some reason I can't get this to work in my car. Do I need to update something on the car first?
Can't *
Do you have the zAutomotive Tazer installed?
What's holding your license plate up??
Only the best investment ever.... I have a 1 year review on this coming soon! 2015-2016 Dodge Challenger Sto-N-Sho Removable Take Off Front License Plate Frame Bracket amzn.to/2goV3gV
Does this work to bring back the bee after you lost it from changing to the srt modes on a 2016? Dang just saw someone asked that dam lol
yes, but I believe you need to disable the SRT modes for it to stick .
So for some reason my charger scat pack after following your video it still doesn't go to the scat bee saddly ):
can you change the color theme. blue, red ect
No, the Tazer does an add themes It only tapped into the functionality that you don’t have access to based on your trim level.
On the website link it's the one called Taser right? And would it help you to put you or your channel where it says how did you hear about us?
+Somedaysuperhero yup the Tazer, and no worries they know where some of their purchases come from. The owner now has my videos up on his site to help people. 💪
Work Play Drive Thank you!👍👍💪
Wish they did this for the GT😅
Can i still tune my car if i install this?
Guess ot only works on older models. Not 2021
I watched your video on the MFR it's all you were buds with rt life. Are you a Jersey Boy? I live down by Long Beach Island and I've got a ton of questions for you. Will the taser void the warranty on my 2016 Scat Pack charger? My next question why only 275 tires? I'm getting ready to order wheels for my car and I do not want them hitting so I'm ordering the Hellcat replica as that's what was on my car when I got it I have the 20 by 9.5 stock from the factory. 245. I'm thinking seriously about going to Mickey Thompson 305 on the back and I think they're Mickey Thompson 305 45 20 I'm not mistaken as I was told that these would fit on the car with a 25 offset on the Wheel by the way and not have any rub issues. Believe it or not I've only ever jumped on the car to times since owning it and she is my daily driver. Will next to RT life and B Mason in the Hemi dude you're right up there very informative videos am I'm an old Street racer from back in the E-Town days. And a Chevy guy. I'm old enough to be retired but I'm not ready to be retarded. so Jersey boy if you got any meets going on in the area and maybe one day we'll meet cuz I would love to have a conversation with you but any inside you can give me on the warranty issues with the taser as I love that line lock feature. And now that I know I will not lose my Super Bee on the dash I'm more apt to do buy it I think some of the videos I saw said that your B would disappear and I you I just love that fucking be I just got the new 2019 Super Bee 392 Challenger emblems I'm taking my Fender emblems off and replacing them they're truly awesome and we're worth the 80 bucks okay this is probably way lengthy and I'll apologize for that and I'll also apologize for any mistakes as I talk text you really don't think I'd type all this now do you LOL your MFR code doesn't work and I really would like to put these on my car
I have a 2015 charger SRT and I tried this but it didn't work 😢
+Shaya K t
the srt load out includes it's own splash screen so it can't be changed to the bee. I'm not sure if you can turn off all the SRT features then turn the bee on, but that would be silly
i'm actually trying to change it into a hellcat logo, problem is i tried this method to enter to the menu system but i couldn't get into it at all
so i'm guessing this method won't work on srt ?
It may also be the Version you are using. The splash screens were added recently, so this menu is not available prior to i believe TaZer firmware version 2.2.6. You can check the firmware by continuing to hold the Left arrow and hit cancel. The version will display it's one of the last screens.
If you need to upgrade I just put out a video on how to do it, enjoy ruclips.net/video/JHFQir6N0x0/видео.html
Work Play Drive cool.. Thanks for the help man👍
No problem, thanks for taking the time to drop a comment :)
What the- they said it wasn’t possible?!! They literally have all scatpacks to display the bee 🐝 or 1320 logo
I have an automatic I took the rims back off I got tired of racing people on my way 2 work lol and the Rims in due time will mess up my car . One of the reasons I want to get the tazer is because I want that B logo as well
you talking about the 24s? I have to ask how is driving with 24" rims?
they drive pretty good with the rims on, but I'll ask around and see if someone has the tazer because I really want the SRT features
Just keep in mind the Bee will go away once you enable the SRT features because the SRT or Hellcat splash screen is tied to the the SRT load.
+Work Play Drive OK preciate it because when I start my car up the only thing it says is Challenger
I can't get the scat pack splash to work. ? Any other suggestions
Check your firmware make sure you have the latest version. The ability to change the splash screen is in the latest release(Firmware Version 2.2.5 - 081616). you can check your firmware on the PC or when you scroll through the Menu.
I just ordered my Tazer, do you know if you can change the screens font to the SRT font instead of the default challenger font?
Yes, just enable SRT mode and the fonts will all change.
Can we make it demon or demon 170 instead of hellcat?
What dashcam is that ?
Love you’re work, was asking myself why didn’t this guy just buy a Shaker. But I realized when you love cars you may wanna do your own version of a shaker. Seeing that I am considering getting a Shaker. I want to ask, is it possible to buy the Scat Pack speed o meters? Not too found of the white that Dodge died with the Shaker.
Thank you, There are a few companies that sell custom inserts in any color. It takes about 2 hours to do the swap.
@@WorkPlayDrive You’re welcome and thank you. This is a tough decision, I guess I’ll decide when I go to the dealership.
Here is a gauge swap video ruclips.net/video/80VVbdaWEhs/видео.html
i have a scatpack but when i try to bring up the menu it doesn't come up please help i really want that on my dash screen
Hey, are you saying you have the TaZer menu, but NOT the option to change the splash screen? If so you need to upgrade your TaZer Firmware the splash screen option was was recently added in the last version. The version in this video will add that menu option along with the ability to map the AUX buttons AND custom light shows. ruclips.net/video/JHFQir6N0x0/видео.html
let me know if that helps...
Work Play Drive hey man my bad im new to this lol so do i need to buy the tazer to get this stuff?
or does it already come with it but i just suck at doing it lmao
Lol, yup you need to buy the TaZer to get this and a bunch of other options. here is the link check it out www.zautotech.com/tazer.html I have a few videos on the TaZer and a lot more coming
Work Play Drive i thought it came with the car well thanks anyways ill try to buy it
can this work with a sxt dodge challenger?
Does this work for the charger SP?
I just tried and didn't, wanted to double check with someone
Sorry I missed this comment, yes it works check out the feature chart www.zautotech.com/docs/Tazer%20FAQs.pdf for all the features it unlocks.
Is the a flash for R/T's?
Does the TaZer have to remain plugged in after changes are made?
For this specific change nope you can unplug after making the change. Note: some other Tazer functions like line lock, light show, nav in motion, etc do require the tazer.
Has anyone tried this on a Charger Scat Pack? I can't get the Bee back following these instructions in my Charger. I like the SRT modes but I want the Bee splash screen back again.
Will Gammelgaard due to the fonts and load out screens in SRT mode you cannot have the bee while it's enabled. I love SRT mode so I give up the 🐝 from time to time
my scat got delivered with the challenger screen and I told the dealer the bee should be on there and they changed it for me only took them a minute
...lol my dealer apparently didn't get the memo, hence why she's never going there unless she is seriously ill.
Thanks ! I go on their website and update it with that firmware from Dec 2016? But I just got my tazer yesterday and it should have it be up to date right ?
Yeah it should be up to date. Use the contact link to reach out to them to see what's up. Just give them a day to respond I just saw them at Spring Fest #SF12 in California this weekend. So he's probably traveling now.