Can someone as easily as possible explain the reason for this? I have a road angel stereo and i cant get power from my 08 punto grande. I think i might need this maybe ?
I've got you full connect2 & pat lead and as this video I'm connecting to a Kenwood stereo but what lead does the key 1 connect to into the back of the stereo (colour/location point ?)
@@foskr4 no sorry just went without in the end and I’ve sold the car 2 year ago haha I remember how sad I was hearing that myself and now I’m saying the same 😂 maybe your day will come to break the cycle
Hi , for chinese autoradio, no loop must be cut that s right? Thx I Can t use on vauxhall Corsa and i have inverted two wires cause the autoradio switched on when i used headlights. Model CTSVX 0003.2
Hi, I have a Kenwood DPX-5200BT. I’ve cut the orange and green, leaving the purple. I’ve connected ‘Key 1’ to the wire to the steering controls, and the wire from the back of the unit… no joy, not working Any advice please
Good Morning, I need your help, I set up the radio (Chinese) but I can not get the drivers to start working. How do I connect GND / Hey1 / Key 2? The radio is: 7060b 7 inch car audio stereo mp5 player
Hi, thanks for messaging us. For technical queries please contact our technical department via support.connects2.com/tickets/technical/ and our tech team will be in contact. Thank you C2
Hi I have followed the guide for this on the nissan juke and it worked for 1 min then it stopped I have checked all the connection but still nothing I put old unit back in it work fine but no joy with the kenwood any help would be appreciated
Hi David, thanks for messaging us for technical queries please contact our technical department via support.connects2.com/tickets/technical/ Thank you C2
Hello dear connect2 i understand how to connect kenwood radio to Can-bus,but if i have car amplifier the remote wire can i connect to remote in kenwood radion witch is connected with can-bus?
Hey Clayton, For Kenwood head units, you will want to use the Key 1 wire which will attach to the steering wheel remote, see the quick cheat sheet here: www.connects2downloads.co.uk/C2/files/InstallationGuides/CTMULTILEAD.2.pdf C2
the small screen showing time and date and air condition indicators are working normally the clock is adjusted from the buttons on the steering wheel perfectly, the problem is with the radio you do not connect the steering wheel buttons with the radio. Honda civic fn2 , nakamichi radio
On a Honda civic 2010, which wires do I conects to which ones? One my Chinese unit (learning) I have sw1 and sw2, when my patch lead comes will it be labelled? If not which ones do connect to?
Hey, Contact our technical department via support.connects2.com/tickets/technical/ and our technical team will be able to assist you with wiring and connections C2
so what the point in having a 3.5 jack just in the head unit when the patch has it but used the brown wire instead i don’t get it why not just plug in the jack as the patch has it on it and the unit ??
Hey Steve, with our ctmultilead, we have worked with each stereo developers code to configure the precise connection, in the case for Kenwood, the wired connector attaches to the steering wheel remote C2
I just wish I could see how the connect 2 is connected on a 8gen Honda Civic I’ve watch so many RUclips videos and I haven’t seen one with a clear way of connecting and off the market head unit on a mk8 Honda Civic
you probably dont care but if you guys are bored like me atm then you can watch all the new movies and series on InstaFlixxer. Been binge watching with my girlfriend lately =)
Hello. I have a question about remote control on my suzuki swift 2013 nz. I have purchased a CTSSZ002.2 suzuki steering wheel control interface + a universal CTMULTILEAD connector. But I can not make it work with my remote control. What can I do for it to work ?, my radio is an XTRONS TE706PL. Hope you can help me
After following instructions and wiring diagrams to the letter this product fails to work! Yes I did make all connections before finally connecting to vehicle OEM quadlock connector. I did extensive research including getting advice from Connects2 direct on what product was needed for my installation in a 2010 Mercedes Sprinter motorhome, fitting a Kenwood DMX8019DABS. I trusted the advise given and purchased the fitting kit CTKMB18. The only steering wheel button to respond in any way is the phone hang up button, which changes the source on head unit. I cannot turn up or down the volume, cannot answer or hang up phone. In the Kenwood head unit under set up - interfaces - steering wheel controls it won’t respond when any of the steering wheel controls are pressed except hang up phone, which just changes source, so it cannot be programmed from the Kenwood head unit either... The harness and unit are either faulty, not correct for vehicle, or wiring instructions are incorrect...? I’m not your average joe diy’er either, I’m 40 years as a qualified motor vehicle tech and my steering wheel controls were perfect before fitting this product. Awaiting reply from connects2 technical department (who have been polite and helpful so far) on what to do next.....?
Hi Richard, Thanks for your question, the lead from the head unit in this video is simply a connection to link the CTMULTILEAD to the head unit, each head unit features a different type depending on brand, for example the head unit used in this video is a Kenwood however on your Pioneer unit you would only need to use the 3.5mm jack on the CTMULTILEAD straight into the back of your head unit.
got a problem on a c3 picasso, the board computer doesn't work anymore (radio and steering wheel controls works perfectly) what can I do? I have a Clarion radio
The borg simulate, so you adapt simulation to the on board Picasso C3 ECU. This is found next to the battery under the black plastic cover. The small aluminium ecu can be unplugged and rebooted set to lymph mode. Do not attempt to do this without firstly removing the aftermarket radio that has probably caused this board problem in the first place. I made this mistake myself and citroën in Mansfield charged me £ 1400 TO CORRECT. ??? Mobile auto mechanics can do this cofiguration for around £200.thats if they have the correct mapping sort ware. I hope this has been helpful to you, good luck and also look out for the scubies.
Hey DL, On the back of the radio should be corresponding wires that state Key1, Key2 & GND, the CTMULTILEAD.2 wiring will need to be attached to each one of these (note the CTMULTILEAD is an older product and only has the one wire). For more information, contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm Best, team social @C2
Nowone have have giv it a good explaining how i do it from opel with canbus, too clarion , look like there ts only 3 car radios in all the world, kenwood,sony and Alpine , the produkt have been inte marked i many years , so have been enogh of time too made videos of all type of car radios how user can do it
Hey, For a full listing of what head unit configuration is needed, have a look here at the installation instructions: www.connects2downloads.co.uk/c2/files/InstallationGuides/CTMULTILEAD.2.pdf C2
Hey Phillip, Blaupunkt models are supported by our CTMULTILEAD range, however this is limited to a few versions of head unit. Contact our technical team via support.connects2.com/tickets/technical/ with the particular model of Blaupunkt head unit, possibly some pictures or description of the wiring and our team will be able to confirm whether the wiring is applicable for the head unit C2
A WARNING TO US CUSTOMERS! This company does not test their product on North American vehicles. They sell their stuff that won’t work, and then when you send it back they tell you that they will not give a full refund!
How i can conect key 1 and key 2 i dont have in multiled this 2 cable
hi, were does key1 key2 on a patch lead go to, my aftermarket radio doesnt have a jack port. bmw e91 touring 2006
Can someone as easily as possible explain the reason for this? I have a road angel stereo and i cant get power from my 08 punto grande. I think i might need this maybe ?
hello. how to connect for nissan qashqai j10 2009 mod with steering. multimedia is AVH 5500 PIONNER. THANKS.
I've got you full connect2 & pat lead and as this video I'm connecting to a Kenwood stereo but what lead does the key 1 connect to into the back of the stereo (colour/location point ?)
If you ever found out I’d like to know currently connecting a kenwood stereo and mine doesn’t have loose leads to just connect to
@@BaileyPalmergamer I sold the car so never found out.
MX-5AVAGE ok thanks anyway
@@BaileyPalmergamerdid u ever find out 🤣
@@foskr4 no sorry just went without in the end and I’ve sold the car 2 year ago haha I remember how sad I was hearing that myself and now I’m saying the same 😂 maybe your day will come to break the cycle
Hi , for chinese autoradio, no loop must be cut that s right?
Thx
I Can t use on vauxhall Corsa and i have inverted two wires cause the autoradio switched on when i used headlights.
Model CTSVX 0003.2
Hi, I have a Kenwood DPX-5200BT. I’ve cut the orange and green, leaving the purple. I’ve connected ‘Key 1’ to the wire to the steering controls, and the wire from the back of the unit… no joy, not working
Any advice please
Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2
Good Morning,
I need your help, I set up the radio (Chinese) but I can not get the drivers to start working.
How do I connect GND / Hey1 / Key 2?
The radio is: 7060b 7 inch car audio stereo mp5 player
hello friend I have the same question you always received an answer or what are you
and also if my remote cable is not working on my kenwood radio can i connect that brown wire to Antena wire ?is not the same?
Hi, thanks for messaging us. For technical queries please contact our technical department via support.connects2.com/tickets/technical/ and our tech team will be in contact. Thank you C2
Where dose the aux end go
Hi I have followed the guide for this on the nissan juke and it worked for 1 min then it stopped I have checked all the connection but still nothing I put old unit back in it work fine but no joy with the kenwood any help would be appreciated
Hi David, thanks for messaging us for technical queries please contact our technical department via support.connects2.com/tickets/technical/ Thank you C2
how to connect to a pioneer stereo.??
Hello dear connect2 i understand how to connect kenwood radio to Can-bus,but if i have car amplifier the remote wire can i connect to remote in kenwood radion witch is connected with can-bus?
Hi, thanks for messaging us for technical queries please contact our technical department via support.connects2.com/tickets/technical/ Thank you C2
My kenwood ddx4018dab has both steering wheel single wire and 3.5mm jack which one should i use ? I purchased this lead also
Hey Clayton,
For Kenwood head units, you will want to use the Key 1 wire which will attach to the steering wheel remote, see the quick cheat sheet here:
www.connects2downloads.co.uk/C2/files/InstallationGuides/CTMULTILEAD.2.pdf
C2
the small screen showing time and date and air condition indicators are working normally the clock is adjusted from the buttons on the steering wheel perfectly, the problem is with the radio you do not connect the steering wheel buttons with the radio. Honda civic fn2 , nakamichi radio
Hi, I would suggest that you speak to our support team they will be able to give you advice. support.connects2.com/tickets/technical/ Thank you C2
On a Honda civic 2010, which wires do I conects to which ones?
One my Chinese unit (learning) I have sw1 and sw2, when my patch lead comes will it be labelled? If not which ones do connect to?
Hey,
Contact our technical department via support.connects2.com/tickets/technical/ and our technical team will be able to assist you with wiring and connections
C2
so what the point in having a 3.5 jack just in the head unit when the patch has it but used the brown wire instead i don’t get it why not just plug in the jack as the patch has it on it and the unit ??
Hey Steve,
with our ctmultilead, we have worked with each stereo developers code to configure the precise connection, in the case for Kenwood, the wired connector attaches to the steering wheel remote
C2
I have Pioneer-sony Connects2 ctlead and can i use it with Nakamichi 1 din head unit?
Hey Enver,
sorry for the belated reply, no you will need to look at investing with the CTMULTILEAD.2
C2
I just wish I could see how the connect 2 is connected on a 8gen Honda Civic I’ve watch so many RUclips videos and I haven’t seen one with a clear way of connecting and off the market head unit on a mk8 Honda Civic
Did you figure it out?
you probably dont care but if you guys are bored like me atm then you can watch all the new movies and series on InstaFlixxer. Been binge watching with my girlfriend lately =)
@Connor Will Yup, I've been watching on instaflixxer for years myself =)
@Connor Will Yup, I've been watching on InstaFlixxer for since december myself :)
@Connor Will yup, been using instaflixxer for since november myself :)
Hello. I have a question about remote control on my suzuki swift 2013 nz. I have purchased a CTSSZ002.2 suzuki steering wheel control interface + a universal CTMULTILEAD connector. But I can not make it work with my remote control. What can I do for it to work ?, my radio is an XTRONS TE706PL.
Hope you can help me
Hey Daniel,
If you message our technical team via support.connects2.com/tickets/technical/ they will be able to diagnose the problem for you
C2
Clean Install, you should try using our products on your vehicle Thank you for the content
After following instructions and wiring diagrams to the letter this product fails to work! Yes I did make all connections before finally connecting to vehicle OEM quadlock connector. I did extensive research including getting advice from Connects2 direct on what product was needed for my installation in a 2010 Mercedes Sprinter motorhome, fitting a Kenwood DMX8019DABS. I trusted the advise given and purchased the fitting kit CTKMB18.
The only steering wheel button to respond in any way is the phone hang up button, which changes the source on head unit. I cannot turn up or down the volume, cannot answer or hang up phone.
In the Kenwood head unit under set up - interfaces - steering wheel controls it won’t respond when any of the steering wheel controls are pressed except hang up phone, which just changes source, so it cannot be programmed from the Kenwood head unit either...
The harness and unit are either faulty, not correct for vehicle, or wiring instructions are incorrect...?
I’m not your average joe diy’er either, I’m 40 years as a qualified motor vehicle tech and my steering wheel controls were perfect before fitting this product. Awaiting reply from connects2 technical department (who have been polite and helpful so far) on what to do next.....?
We have a pioneer, so in this vid you connected a wire from patch lead to another wire from the head unit. What was the head unit wire 🤔
Hi Richard, Thanks for your question, the lead from the head unit in this video is simply a connection to link the CTMULTILEAD to the head unit, each head unit features a different type depending on brand, for example the head unit used in this video is a Kenwood however on your Pioneer unit you would only need to use the 3.5mm jack on the CTMULTILEAD straight into the back of your head unit.
I Connected everything right and my steering wheel comands still dosent work …
Can you help me and send instructions on how to connect remote control to the fiat stilo and jvc kw-avx800. tnx :)
got a problem on a c3 picasso, the board computer doesn't work anymore (radio and steering wheel controls works perfectly)
what can I do?
I have a Clarion radio
Matteo Raia hello. can you say Borg computer work?
The borg simulate, so you adapt simulation to the on board Picasso C3 ECU. This is found next to the battery under the black plastic cover. The small aluminium ecu can be unplugged and rebooted set to lymph mode. Do not attempt to do this without firstly removing the aftermarket radio that has probably caused this board problem in the first place.
I made this mistake myself and citroën in Mansfield charged me £ 1400 TO CORRECT. ???
Mobile auto mechanics can do this cofiguration for around £200.thats if they have the correct mapping sort ware. I hope this has been helpful to you, good luck and also look out for the scubies.
How about the setup for chinese headunit like mine? Thank you sir!
Did you get this to work?
what about joying radio .
Did you get it to work?
Hola , tengo una interfaz , pero no se como instalarla para un radio chino ,
Hey Rosemanizales,
Contact our tech team via support.connects2.com/tickets/technical/ and they will be able to walk you through the process
C2
Player mp5 player 7880s how use key1 key2 and gnd ?
Hey DL,
On the back of the radio should be corresponding wires that state Key1, Key2 & GND, the CTMULTILEAD.2 wiring will need to be attached to each one of these (note the CTMULTILEAD is an older product and only has the one wire).
For more information, contact our tech team via:
support.connects2.com/tickets/technical/
Our team can be contacted via email or phone during the following opening hours:
Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm
Best, team social @C2
Nowone have have giv it a good explaining how i do it from opel with canbus, too clarion , look like there ts only 3 car radios in all the world, kenwood,sony and Alpine , the produkt have been inte marked i many years , so have been enogh of time too made videos of all type of car radios how user can do it
How to connect to VDO or Continental radio?
Hey,
For a full listing of what head unit configuration is needed, have a look here at the installation instructions: www.connects2downloads.co.uk/c2/files/InstallationGuides/CTMULTILEAD.2.pdf
C2
Did you ever find out how to connect to VDO or Continental radio?
Connects2 where does the jack go on the pionner deh-x8700bt
Is this product incompatible with Blaupunkt?
Hey Phillip,
Blaupunkt models are supported by our CTMULTILEAD range, however this is limited to a few versions of head unit. Contact our technical team via support.connects2.com/tickets/technical/ with the particular model of Blaupunkt head unit, possibly some pictures or description of the wiring and our team will be able to confirm whether the wiring is applicable for the head unit
C2
Get some new sidecutters
Recession bud, penny pinching where we can!
C2
He connected it to the handbrake wire on the radio 🤦
A WARNING TO US CUSTOMERS! This company does not test their product on North American vehicles. They sell their stuff that won’t work, and then when you send it back they tell you that they will not give a full refund!