Thanks for the great video. I just did the same install tonight. Pain in the ass. Passenger peg assembly was harder to get out than I expected. Also difficult getting those rear 6mm bolts out without rubbing the plastic exhaust shield! Despite laying a towel over the tire and taking all precautions I managed to still drop one of the spacers into the abyss. 30 minutes later with a mirror and magnet (multiple f bombs and sweating my ass off) I was able to recover it thankfully. Nothing is easy it seems for me 😂
Anyone have a part number for the spacers? I called my local dealer and the parts guy is telling me that the spacers only come with a new exhaust. I am sure they will be out of business soon enough because people drive 3hrs out of their way to buy bikes/parts from the next nearest dealership to not deal with them. Sad, I know.
When doing a job like this, I alway use a big towel underneath where I'm working, so if the bolt drops it lands on the towel, reducing the chance of it going missing in the engine compartment. 👍
If you think this is difficult try the same job on a CBR1000 rr Fireblade rear section of the frame has to be removed, but thanks for the vid getting V2 in April 21
Hey Dario, Rooting for this channel bruh bruh, keep up the informational how to videos Just got my V2- watched ur rear cowl video and rear peg removal vid Very helpful!!!
I got a Bayliss with the spacers already installed…the left one I can’t get off of that sleeve they sit on. Any ideas? There doesn’t seem to be enough room between the exhaust cover and the bottom of the seat to get the left one out
Dario, trying to take my pillion pegs of and the Left hand bolt under the exhaust cover has rounded off. What tool do you recommend to remove it, as access is tight? Cheers man
On my 2023 SFv2, spacers were unnecessary. Just replace bolts with shorter ones. Recommend stainless. Same as panigale, but mine was not removed as easily as video demonstrated.
I don’t have as much room as Dario for some reason. Same bike and everything. I’ve tried for weeks to get those spacers on and I just can’t get them on! So you aren’t using them. Do you have plastic rubbing plastic?
@@donniejean I'm not. There were already some spacers there. Were you able to get to the 6mm bolt holding the passenger pegs from under the seat? The spacers I used were captive in the passenger pegs. Can't post a pic here.
Great info… but before telling people to go buy fasteners from your local hardware store isn’t the best advice. It’s important that you ensure that you meet or exceed the oem fasteners tensile rating. You’re better off going to an engineering trade supply store so you can buy quality high tensile bolts instead of ungraded or low tensile bolts 😎
@@heydario I was referring to the heat shield spacers after peg removal but my dealership had some extras to give here in AZ for free! Thanks for showing me how to remove
I don’t understand how you do 4:40 so easily. Mine is a V2 Troy Bayliss and it’s nearly impossible to take it out. I’ve managed to take out the right one but the left one is stuck there… any idea?
Just lost one of those bolts into the abyss of my 959. I've rocked the bike back n forth and side to side. Not hearing any rattling. Even slide one of those magnet tools down there and nothing. I truly believe it's a portal to another dimension.
E ouch!! Check your chain too... I had a time when I lost a bolt, no sound... I just kept checking because I just couldn’t believe it.... it was lodged in my chain... 😬😬😬
Thụy if you’re local dealer does not have any in stock you order them online.... I got mine from AMS Ducati because I couldn’t find them from my local dealers
Hey Dario gotcha, thanks man. I haven't asked my local dealer yet but I doubt they have it. My local dealer is literally just a house with a couple older models sitting in the living, mom and pop shop 🤣
Hey Dario I'm in Des Moines, Iowa. We have one Ducati dealer in the state. First time looking for it I was like yeah probably gonna be a fancy ass building and showroom, Italian exotics and all that. Nope, literally a house in a residential area. Look up motosports Des Moines, you'll see it haha. Great folks to work with, I guess that's all that really matters. Just wish they had current popular models like the V4 and Streetfighter to come look at.
Thanks for the great video. I just did the same install tonight. Pain in the ass. Passenger peg assembly was harder to get out than I expected. Also difficult getting those rear 6mm bolts out without rubbing the plastic exhaust shield! Despite laying a towel over the tire and taking all precautions I managed to still drop one of the spacers into the abyss. 30 minutes later with a mirror and magnet (multiple f bombs and sweating my ass off) I was able to recover it thankfully. Nothing is easy it seems for me 😂
Lol!!! Glad you got it bro
Just bought a 2021 Rosso V2 and this video really helped me realize the importance of the spacers. I've got them on order. thank you, Dario.
Glad to help my guy!! 💪🏾😎🤘🏾
Anyone have a part number for the spacers? I called my local dealer and the parts guy is telling me that the spacers only come with a new exhaust. I am sure they will be out of business soon enough because people drive 3hrs out of their way to buy bikes/parts from the next nearest dealership to not deal with them. Sad, I know.
Amazing attitude and positive vibe my dude.
Rooting for this channel. Good stuff.
George Grubb wow, much appreciated bro!!!
Bro has everything I’m looking for 🙏🏼🙏🏼🙏🏼
Well done. Anyone needing assistance should be well supported through the vid. Good stuff Dario!
Thanks 💪🏾🤓
When doing a job like this, I alway use a big towel underneath where I'm working, so if the bolt drops it lands on the towel, reducing the chance of it going missing in the engine compartment. 👍
Good idea!
Going to remove those tomorrow, thx for the video, ordered the spacers based on your info, Much appreciated 👌💪
Could you also share the link of the spacers? thanks
If you think this is difficult try the same job on a CBR1000 rr Fireblade rear section of the frame has to be removed, but thanks for the vid getting V2 in April 21
V2!!!!!!! 💪🏾😎🤘🏾🤘🏾🤘🏾
as always bud a pleasure to watch the video
Hey Dario,
Rooting for this channel bruh bruh, keep up the informational how to videos
Just got my V2- watched ur rear cowl video and rear peg removal vid
Very helpful!!!
Thanks bro! Let’s gooooo!!! 💪🏾😎🤘🏾
Awesome commentary, thanks!
I’ve dropped bolts in the bike before too. Very frustrating. Now I lay a towel down over all the openings.
HI bro, what are the cover sparcers serial or where i can buy them?
I got a Bayliss with the spacers already installed…the left one I can’t get off of that sleeve they sit on. Any ideas? There doesn’t seem to be enough room between the exhaust cover and the bottom of the seat to get the left one out
Dario, trying to take my pillion pegs of and the Left hand bolt under the exhaust cover has rounded off. What tool do you recommend to remove it, as access is tight? Cheers man
amzn.to/3jqDEqT
do you have one of these?
On my 2023 SFv2, spacers were unnecessary. Just replace bolts with shorter ones. Recommend stainless. Same as panigale, but mine was not removed as easily as video demonstrated.
I don’t have as much room as Dario for some reason. Same bike and everything. I’ve tried for weeks to get those spacers on and I just can’t get them on! So you aren’t using them. Do you have plastic rubbing plastic?
@@donniejean I'm not. There were already some spacers there. Were you able to get to the 6mm bolt holding the passenger pegs from under the seat? The spacers I used were captive in the passenger pegs. Can't post a pic here.
@@kyle1175243 I got them in today finally! I have to shave off about 1mm off one spacer, but oh well. Now I get to find all the tools I dropped 😩
Any recommendation on the spacer sizes?
Where can i get these spacers ? Is there a part number ? Thank you
Great info… but before telling people to go buy fasteners from your local hardware store isn’t the best advice. It’s important that you ensure that you meet or exceed the oem fasteners tensile rating. You’re better off going to an engineering trade supply store so you can buy quality high tensile bolts instead of ungraded or low tensile bolts 😎
What size is the long hex key? The L shape hex?
Do you buy all the aftermarket from ducati or online sites?
It depends on what it is.... I like some Ducati stuff... and I also like some aftermarket stuff
We're did you get the spacers from ???
Dario, can you please include the link for those spacers
I got em from AMS Ducati’s website
Product: 71614961AA Ducati SPACER
hi sir, I cant buy the spacers in CHINA, could you please tell me the diameter of both sides?
Are those exhaust cover spacers necessary to delete the passenger pegs?
Yes, or that piece will not be secure
Can u please share a link for the spacers
Can you post the link for the spacers? I can’t find them to save my life on AMS Ducati!!
I think it’s ducatispacers.com
@@heydario I was referring to the heat shield spacers after peg removal but my dealership had some extras to give here in AZ for free! Thanks for showing me how to remove
@@adalbertpayan811 oh lol, cool nan
Link for peg spacers?
@@travisedwards7334 Finally found the part number.. They are using the V4 spacers. Look up part # 71614961AA
I don’t understand how you do 4:40 so easily. Mine is a V2 Troy Bayliss and it’s nearly impossible to take it out. I’ve managed to take out the right one but the left one is stuck there… any idea?
Do you have a flexible joint tool?
@@heydario at the end I’ve managed to sort it out with my father’s help and some brute force. Thanks!
Just lost one of those bolts into the abyss of my 959. I've rocked the bike back n forth and side to side. Not hearing any rattling. Even slide one of those magnet tools down there and nothing. I truly believe it's a portal to another dimension.
E ouch!! Check your chain too... I had a time when I lost a bolt, no sound... I just kept checking because I just couldn’t believe it.... it was lodged in my chain... 😬😬😬
Where do I get the spacers from?
Thụy if you’re local dealer does not have any in stock you order them online.... I got mine from AMS Ducati because I couldn’t find them from my local dealers
Item number 71614961AA
Hey Dario gotcha, thanks man. I haven't asked my local dealer yet but I doubt they have it. My local dealer is literally just a house with a couple older models sitting in the living, mom and pop shop 🤣
Thụy 🤣🤣🤣🤣 wow, where are they located?
Hey Dario I'm in Des Moines, Iowa. We have one Ducati dealer in the state. First time looking for it I was like yeah probably gonna be a fancy ass building and showroom, Italian exotics and all that. Nope, literally a house in a residential area. Look up motosports Des Moines, you'll see it haha. Great folks to work with, I guess that's all that really matters. Just wish they had current popular models like the V4 and Streetfighter to come look at.
You could just use shorter screws