This truck inspired me to put a Chopocobra in my 6.2, I ended up going with a 2800 stall converter, my truck rips way harder now with the cam, gonna do 3.73 gears and smaller tires this winter, excited to have a race truck. Glad yours has been just as reliable as mine (I love chomper)
You're definitely spot on with the gearing for these trucks. One thing I will add that is killing your power is having a stock converter in it. I have a 2000 silverado 1500 4x4 that's built to the hilt. It came from the factory with 4.10s, luckily. I have a FTI 2800 stall converter in my 700whp capable Performabuilt 4l60e. The motor is a stock crank, bored .30 over block with flat top pistons running 10.5-1 compression, Texas Speed stage 4 truck cam and a set of nasty 220cc PRC heads with a TBSS intake manifold. Im running 1 3/4" long tube headers with 3" dual exhaust with an x-pipe into 2 Borla XR1's. My rig made 340whp on the dyno through 33s and a worn out 200k mile transfer case being very conservative on the tune. My truck rips but I can watch the fuel guage move when I stomp it. Don't expect to get good fuel economy with a built truck lol
love it. i got a 06 cateye with 230/243, .592/.610 112 lsa cam from summit racing. it's their discontinued truck cam and I love it! sounds freakin amazing. I need to go back amd look at your exhaust video for chomper it sounds soooo good brotha
Got a bone stock gmt900 in Highschool, i cammed it, put on headers/exhuast, changed the converter for a 2k stall. With the 6l80 I can run 4.30 gears with 22's and low pros and still run 85 mph below 2300. Also dorman makes a aluminum coolant cross over pipe for the one thats leaking on yours. Took me 15 minutes to change it form hood open to closed
Planing to cam my ‘17 with a BTR stage 2 truck cam and a couple upgrades to go along with it. Going to install 4.56 gears to help turn the 35’s I have also
Great truck I have a 2005 avalanche that I bought two years old with only 100,000 miles on it. IT'S a garage queen but I would love to do mine like yours thanks for the content.
Just ordered my angry elf/chopacobra cam yesterday! Hope to get my 05 Silverado sounding as good as yours next year! Oh and Merry Christmas to you and your family!
I have camed my truck is the twin to chopper. I went with the truck Norris cam. Did valve springs push rods lifters the whole 9 yards been pretty good to me so far and I put long two headers on it with 2 1/2 inch pipe into a dual in dual out, black widow, angry housewife, muffler she is loud lol
Lmfscrew . Hi i’m Zakk i have a 06silverado 4wheel drive extended cab and my starter grinds when i try to start it can you please tell me what’s wrong with it ? or do you know what’s going on with it ? I’ve had to put 4 starters in that truck 0:02
Have an 11 avalanche with a truck Norris cam! Love it! True dual straight pipe, no headers yet! But more coming in the summer! Don’t ever sell that truck! 😂❤
my 99 silverado round body has unknown mods pushes through the brakes and stalls alot 4x4 and it rips but recently dropped 2 lifters so i can see whats done to it when i pull the motor in a few weeks
Please don't ever sell chomper
This truck inspired me to put a Chopocobra in my 6.2, I ended up going with a 2800 stall converter, my truck rips way harder now with the cam, gonna do 3.73 gears and smaller tires this winter, excited to have a race truck. Glad yours has been just as reliable as mine (I love chomper)
I love your vids! Chomper made me fall in love with gmt 800s
You're definitely spot on with the gearing for these trucks. One thing I will add that is killing your power is having a stock converter in it. I have a 2000 silverado 1500 4x4 that's built to the hilt. It came from the factory with 4.10s, luckily. I have a FTI 2800 stall converter in my 700whp capable Performabuilt 4l60e. The motor is a stock crank, bored .30 over block with flat top pistons running 10.5-1 compression, Texas Speed stage 4 truck cam and a set of nasty 220cc PRC heads with a TBSS intake manifold. Im running 1 3/4" long tube headers with 3" dual exhaust with an x-pipe into 2 Borla XR1's. My rig made 340whp on the dyno through 33s and a worn out 200k mile transfer case being very conservative on the tune. My truck rips but I can watch the fuel guage move when I stomp it. Don't expect to get good fuel economy with a built truck lol
Chomper needs a 6.0 or 6.2. Feel like you'd fall in love with it all over again.
A swap video in the shop would be fire too sounds like a win win
Always enjoy every time you drop a video when I’m bored
I’m gonna take that as a compliment 😅
love it. i got a 06 cateye with 230/243, .592/.610 112 lsa cam from summit racing. it's their discontinued truck cam and I love it! sounds freakin amazing. I need to go back amd look at your exhaust video for chomper it sounds soooo good brotha
Chompers still my favorite on the channel lol. Probably always will be
Got a bone stock gmt900 in Highschool, i cammed it, put on headers/exhuast, changed the converter for a 2k stall. With the 6l80 I can run 4.30 gears with 22's and low pros and still run 85 mph below 2300. Also dorman makes a aluminum coolant cross over pipe for the one thats leaking on yours. Took me 15 minutes to change it form hood open to closed
I have a 06 cateye and I plan on doing a cam and tune and dynomax bullets with carven tips. That’s the plans but also love chomper and Larry
I love all these chopper videos right after I get my 03 cateye back from getting cammed like literally 2 days ago😂
Planing to cam my ‘17 with a BTR stage 2 truck cam and a couple upgrades to go along with it. Going to install 4.56 gears to help turn the 35’s I have also
I’m am in process of manual swapping my 2005 4x4 Tahoe and a cam will be next for sure
Great truck I have a 2005 avalanche that I bought two years old with only 100,000 miles on it. IT'S a garage queen but I would love to do mine like yours thanks for the content.
Just ordered my angry elf/chopacobra cam yesterday! Hope to get my 05 Silverado sounding as good as yours next year! Oh and Merry Christmas to you and your family!
I’m about to buy the same cam what exhaust setup are you running
@ right now I’ve got corsa, with dual out the back, looking to get the speed engineering long tubes soon as well.
Put the choppacobra cam in the v max with the procharger.
Long tube headers kill starters, heat wrap your headers by the starter.
Great video!
Mud grappler time for Chomper, been too long
Love those wheel on Chomper! I have an 07 that I’m in the process of doin the Dod delete with a TSP Stage 2 cam
I'm planning on cam swapping to a 292h comp camp in my 98 gmc k1500. You cam swapping truck makes me want to try it lol
I have camed my truck is the twin to chopper. I went with the truck Norris cam. Did valve springs push rods lifters the whole 9 yards been pretty good to me so far and I put long two headers on it with 2 1/2 inch pipe into a dual in dual out, black widow, angry housewife, muffler she is loud lol
I plan on camming, not sure what to get yet though
Chopper looking nd sound goods
I had an issue on a Silverado where it wouldn’t start sometimes, I changed the starter relay and never had any issues again.
Where’d you get your headliner at and choppers
Lmfscrew . Hi i’m Zakk i have a 06silverado 4wheel drive extended cab and my starter grinds when i try to start it can you please tell me what’s wrong with it ? or do you know what’s going on with it ? I’ve had to put 4 starters in that truck 0:02
Might have some bad teeth on the flywheel, or may need to shim the started to mesh better. I’d start there.
@@clardy01 I’ve put shims in it when i put the starter in
I just picked up a black 06 sierra single cab basically a baby chomper! I wanna go tsp or btr truck norris!
Check out Glenn’s auto performance for that coolant hose there’s does away with that plastic y fitting I got one on my 04 and it’s been solid
I have a 03 suburban with a BTR Stage 2 truck cam. Catless with super10 flow master. Definitely wish I had went with a stage 3 instead
Have an 11 avalanche with a truck Norris cam! Love it! True dual straight pipe, no headers yet! But more coming in the summer! Don’t ever sell that truck! 😂❤
What tune are you running? I have the same headers and an exhaust
Maaaaaaaaan why’s the plan with the old vortec max just the charger or we thinking a cam in the future too
my 99 silverado round body has unknown mods pushes through the brakes and stalls alot 4x4 and it rips but recently dropped 2 lifters so i can see whats done to it when i pull the motor in a few weeks
I have a 6.0L 2500hd 2011
And man if i put the work in like you bro i bet the chop will be like yours bro bro
Great content 🤙🏽
What number casting heads does it have
Need to do the Nissan titan rear glass
What gears currently?
Certain gmt800 avalanches and z71 suburbans had factory 4.10 gears that would make for an easier front end gear swap
Are the subs still in chomper?
Which intake is that sir?
Badass truck. 💯💯
Love chomped but I miss big betty
Why didn’t you put the pro charger on chomper that would have been sick
Merry Christmas to you and your family. See you in 2025. 🎉
Vmax is the one thats was ment to be procharged since its 6.0 factory and 4wd
Should look at electric fans for chomper
Nah fr
It already has e-fans from the factory
I’ve got a 1994 Chevy Silverado and I wanna put a mutha thumpr cam in it from comp cams
4:10 gears next
Supercharge The Truck!!!!
More Larry content
You should do bucket seats in the back
Not when you got little ones, just not feasible. Could be, but the bench is better for the family
First 😲