Testing a Bearclaw exhaust pipe on a dolmar 7300
HTML-код
- Опубликовано: 12 сен 2024
- When I first ran this dolmar 7300 i quickly realized that it was being held back by the choked up stock muffler.
So I installed a pipe off a hisqvarna 266 to see if it wakes up the saw.
thanks for watching..
When it comes to power saws, your enthusiasm is infectious! When you realized that that Bear claw pipe would fit, you were like a kid with a brand new toy on Christmas!!! Love the content you bring to us! You have a loyal follower in me here in Michigan!!!!
It's true; I do like powersaws lol.
Thanks fir being here Joe
G'day Tinman, those 025's were a good little saw I purchased one in 92 for limbing and it payed for itself many times over, I also had a Sachs Dolmar 80cc I couldn't fault it I always placed it on a mat to protect the paint when I traded it in on my first 066Magnum I received what I payed for it it pays to look after your saws I had only blocked 1500 tonnes with it 👍.
Excellent Video! Dolmar got bought by Makita, and Makita has made the "cooperate" decision to stop making gas powered saws :( There is a shop in New York, "The Cutting Edge"; in Greenwich NY. Prolly the most knowledgeable and complete Dolmar dealer in this country. An amazing collection of the big dolmars , even Wankel's. Hope you get the chance to meet them before they are gone :(
Didn't you do a video of an event there several years ago??
@@tinmanssaws yes I did :)
@@afleetcommand I thought so. Looked like an interesting place
That saw is STRONG for a stock saw with just a pipe. Very nice..
I thought so to. It has pipe thats it.
That pipe is a design to be admired. I will be trying to replicate it. I remember seeing it on Buckins channel a ways back and I thought it was cool. Now in your video I got to see more of it and I got to see the difference between the stock exhaust and the bearclaw exhaust on the same saw. It is outstanding. Great video Tinman.
Mt favorite go to is the 7900! Love them Dolmars!
I like seeing these different saws.
IS THAT DOLMAR EVER CLEAN GREAT SAW TINMAN,,CUTS AMAZING STAY safe buddy,,SOUNDS VERY SNAPPY,,NICE SAW ARSENAL,,WOOD WEISEL CLAWING DEEP
Wow! That Bearclaw pipe really turned it into a whole different saw👍🏻 may just have to make a couple when it cools off some more!
Tinman, love your channel and of course the ironhorse! I'm with you on the limiters on the carburetor and would like to take mine off my saw, however I'm not mechanically inclined and either too tired after work to read something about the proper way to take them off. Saw a couple things on RUclips on how to do it, but would like a pros advice. Thank you for your time, your friend in the woods, Dave in Ohio. Have a wonderful day
I'm a Stihl man but have a Dolmar 116e which I think is awesome; so much grunt for a 60cc saw. Rips through Aussie hardwood like it was pine! I enjoy your videos.
A nice muffler and a shirt of guns n roses!!!! heack yeah!
Hey Tinman 🙋♂️
I’ve the makita 7310 and it PORTS!
It’s a beast. Outruns my ported 371’s.
Looking forward to your adventures with this saw dude! I got the 7900 stock and its reaaal nice.
My 7900 is personally 20% better than my Stihl 460, bought my 460 new, and my dolmar blown up, was straight gassed, new C n P and best saw I ever owned
hey brother hope all is well with you, momma and baby! thanks for keeping up with the great content we sure appreciate it!!
I have that same model, also 6 other dolmar saws. Absolutely love them! I'm just a firewood cutter,all are stock. I cut ash, maple, and oak in N.E.Ohio. 3 to 4 cords a year. Made in Germany! Wood(pun intended) love to see more content on these saws. Not very popular in my area either. Such a good saw more folk's should know about. Love all your videos!!! Take good care of your family and yourself !!! Love ya brother!!
Subscribers inching up. Good family man ,good content and video’s. You are doing things right Tinman♥️👍Blessings for Momma and baby ♥️🙏
Wow, what a nice running saw! That pipe really woke it up!
That’s a non-cat muffler, it just has a baffle inside. A pretty simple one at that. The cat mufflers are stainless steel. Sounds good with that bear claw pipe!
Subscribers are inching up👍. Good family man, good content and video’s no where to go but up Tinman♥️👍
Thank you so much for saying that!!
Nice saw those pipes seemed to make a difference on a stock saw. I have (dolkita) makita dolmar ea6100p stock would like to try pipes ha ha need those ear protection 😀. Congrats there new dad.
Great vid tinman keep being you brother hope a ll is doing well
In 2010 a dolmar6400 started my firewood bizness, 300 cords a yr, then instantly found the big bore and did it, im so bummed there not available anymore, i still got the sticker from the shop i bought it from, i paid 500$ brand new
Boy, that thing sounds awesome and runs well too.
Nice video! As usual. My 7900 with slight muffler mod pulls a 36" through wood like a mofo!❤️. Not crazy about the floppy AV system, but she starts and cuts like no tomorrow🔥
I love that saw. Very upset to see this brand being discontinued 😢.
That makes me want a dolmar with a bear claw pipe.
Hey Tinman! I hope all is well with the new baby. I really enjoy watching your videos. I have the same dolmar 7300 but it’s in a little rough shape Lol. They are a good strong saw for sure! I’d like to replicate the bear claw pipe for it because it sounds so good! Stay safe out there and keep the awesome videos coming! 👍
Love the sound of that pipe
Honestly I don't know what it is about dolmars with a pipe on them but they sound absolutely beautiful!!! doesn't matter what dolmar saw either could be a sach's dolmar could plain dolmar or modern makita which is a dolmar 😁👍 awsome video tinman
Best sounding stock saw I've ever run
Pipe is amazing so much better Tinman. Can't beat a dolmar. World's best kept chainsaw secret
It is evident from your experience and from Buckin's that Bearclaw knows his stuff. 👍
My favorite saw in my stable is my es5600 Makita/dolmar.
I love dolmars. Have a 7900 and the old monster 9010. They really are well built. The name changed a number of times throughout their history, Sachs dolmar was one of the names, which changed just to dolmar in 1991 when makita bought the company. Makita buying dolmar was the worst thing that could have happened. RIP dolmar.
That 7300 sounds mean with the bear claw muffler.
I have a Makita 6421 and it works beautiful, has tons of snot, but in that form it has a long stroke to bore ratio, runs very strong
I’m going to have to make a pipe for my Husky 61 that I bought new in1991.
Watch that strap Tinman, when you get a running start in the truck and take up the slack. I've busted those before, on trees that wouldn't move. Also, I'm sure you know the wrap a few times around the tree, and that gets it rolling too - but yeah, I broke that exact strap doing what you just did - but on a much bigger log that was partially over the side of a river bank. It was kinda a drag (though we did get the tree out, with a bigger more heavy duty strap, and some cutting) but I used that strap so many times to pull cars out in the winter time. Haven't used my new one yet.
GnR T-shirt, poulan hat and some wayfarers. oh and a Dolmar.....I love it!
Great saw, thanks for the video!
You had me at Dolmar! Yeah, I’ve gotta build a Bear Claw pipe for sure now.
The 7300 is an earlier version. I think you got to get to the xx21 saws before the cat showed it’s ugly head.
What a screamer!!
That saw sure spits chips. Wow. TC Mahalo Tinman🤙🤙🤙
Love the pipe videos!
Man those pipes sound good
I own a Dolmar 5105. Its a real screamer.
Channel growing fast. U buy nice saws
Thanks I try to show as many saws as I can
@@tinmanssaws YOU are doing a VERY good job of it too! Keep up your good work Tinman 👍
dolmar saws are awesome!
That’s a great saw. Reliable workhorse bud!!
What a difference, nice handy size wood.
Really nice running saw
Love the content as always tinman. You gonna part that dolmar or not?
Yeah I'll port it fir sure
@@tinmanssaws I believe the guy asked if you wanted to sell the saw, part with it, not port it, I have 6400-7300-7900, all of them, was wondering if a big bor kit to make a 85cc with the 54mm piston would give more power but hurt my low end torque, want to see pictures of your little baby, mine are all grown up, stay strong
Ive gotta learn to make 1 of them pipes
Today I’m not buying a 2511t and 361. I’ve been wanting both and they both showed up not at crackhead prices, yet here I sit.
If a 372xp showed up I might not be able to resist any longer.
That said I can’t believe you want an 025 having run 260’s. Same weight, more power and rpm. I have a 346xp and wouldn’t want another saw with the same weight and less power. I think about a ms170 or cs-3450 but want the super light 2511t more for lightweight gas cutting to replace my 20v dewalt just for run time and fun factors. I use the dewalt for anything it’s big enough for as the weight and one hand use gives ginsu properties.
The problem with dragging logs out is dirt. I’d much rather cut in the tangle then cutting the one you dragged out.
Don’t know if comments are loading
Always nice to improve performance of the saw, but it’s nice if it can be done while keeping the aesthetics of the saw as well. Never been a fan of the way the pipes look. Just a personal preference. Bye the way, the Wood Wiesel sounds pretty good too.
I've got a 7900 and would be very interested in a little porting. Hope to see some on the 7300.
I need one of those bearclaws for my 262xp.
Great vid but I wish u would have gotten in 2 some bigger wood 2 really see what that saw can do!
Bud, that sounds awesome.
Damn this saw seems awesome. Shame about the oil leak. Wondering how the build quality compares with the various Husqvarna models.
These saws are every bit the quality of husky or stihl from what I've seen..
Sachs Dolmar has been around for decades and well known more in Europe. Made some great saws and sadly bought out by Makita a few years ago, and they’ve completed eliminated internal combustion engines. Nothing but electric offerings now.
Could you go over things to bring your saw to life before porting? You showed muffler mods. Is there other things?
I know who built that pipe for billy, the transfer ports in those DOLMAR are tiny, could use a lot of work, but how does it run so good stock, love them saws
I wish I could get a good coil for my ps 6400.incidentally the
Coils have to be matched to the flywheel.
I wana 7900 bad lol maybe 1 day
how much performance do you think you gained with that pipe? where could i find one? i have a ps7900 if it runs that nice with pipe i might keep stock and get a 066 for big stuff
The difference in that saw piped vs stock is the difference between it sitting on a shelf and me running all the time..
The difference is drastic..
so prefect :)
Tinman- this Dolmar saw looks almost identical to a Makita, I think. Is that right? Are they almost identical saws?
Why do you pull the rope out before you shut down the saw ?
that dolmar is pretty peppy with the pipe on it.
I've never heard a chainsaw referred to as a powersaw before. Is that a Canadian thing?
We refer to them as both in Oregon.
They were called powersaws before people started calling them chainsaws
yep all the time that and a wrist pin ill give you a wrist pin in the arm at the start of the hand lol
I'm always curious about why certain things are called what they are. For some background I'm from the east coast of the US and logging used to be pretty big here. I remember growing up my Dad having old McCullochs and Homelites. Everyone always called them chainsaws or just "saws". From my nerdy research "powersaw" seems to be more of a west coast thing. Thanks for the replies everyone.
I would feed that saw lol😂
Somebody that wants to make some cash should start mass producing pipes for some of the most popular models of vintage saws. I know I would buy some.
Dolmar bought by makita
Bonjour, où peut-on trouver un échappement de ce type s'ai pour monter sur ma 7910, merci.
Wooooooof
Yall have ash boarers up there
Yep we do.
@@tinmanssaws that's a shame , I guess there from the east coast to the west coast here in the states . What state would be directly below you ?
The only saw that is better than the Dolmar 7300 is the Solo 675
May I ask why do u pull ur pull cord the 6" when shutting off the saw?
That’s “just in case” it catches the starter pawls while it shuts off, because those mechanisms only allow for so much of that to happen before they give out. Buckin has covered it on his channel a few times but so has Tinman.
Wouldn’t it be running lean after swapping to the new exhaust? Or what is it about the change would make it rich? I slapped a bark box on my 036 and had to richen the carb
These pipes seem to create some pull in the exhaust, they always make a saw richer when they work.
A muffler mod always seems to lean a saw out.
@@tinmanssaws very interesting. Keep up the good work!!
i have an 025 i would let you work over for me fun saw
Your hand filing is better than mine. From what l see from your video's...we are about the same size. I dont care what brand ya run, but take it from a old man...please get a 28" bar! Your married, new young'un....get what cuts faster for ya.
I'm not following you?? That is a husky bar is a 28.
@@tinmanssaws 😊 l should have known. Im sorry! I was trying to give advice to a new dad, l see l have failed. Carry on Tinman!
& dont worry tinman....lm often misunderstood! I aim for kindness,but often seems l miss the mark.
Ya would'nt happen to have a extra one of those bearclaw pipe's....wouldja?
I think I hear it 4 stroke n in the cut
She Cuts Eh!
Eh
Great saw my good friend in Washington built me a 7900 out of a 6401. I need a flywheel tho mine snapped the key off. What do you keep in your go to saw tool box? I have not seen many of you guys go over a field box. Thanks friend from Graton California
So how does a guy get a bear claw pipe for a 372?
You have to build it.
I thought that your gmail was up for free questions everyone had with saws.
My email is on my about page if you have a question. Please feel free the send me an email with any questions
@@tinmanssaws Already did. Haven't replied unfortunately
Non taglia poi è troppo magra di carburazione 😢
o machado e a motosserra
eli silva & zé goiano
composição: moacir dos santos / zé goiano
o machado e a motosserra tiveram uma discussão
motosserra diz que é orgulho da evolução
machado pra mim já era pois vem do tempo de adão
você agora só serve pra fazer calo na mão motosserra dá um ronco relou o dente no tronco já se vê o pau no chão
a serra chamou o machado pra fazer uma porfia
machado aceitou na hora e quando chegou o dia
entraram junto no mato pra mostrar a serventia
a motosserra roncava machado velho tinia
e naquele matagal foi só cavaco de pau pó de serra que subia
e esse grande duelo deste jeito é que termina
na briga das ferramentas o machado é que domina
motosserra parou cedo ali no tronco da quina
machado seguiu cortando mata grossa e mata fina
motosserra impotente rebentou sua corrente acabou a gasolina
que isto sirva de exemplo para toda humanidade
e você que é tão jovem tem que saber a verdade
respeite bem os mais velhos não brinque com sua idade
uma pessoa idosa também tem utilidade
é um diamante valioso se não tivesse o idoso não teria mocidade