Sirji, I am a certified welding engineer. The first thing you must watch for welding inspection is a PWPS and WPS. That would determine the whole scenario. Next time ask the enginner to provide you with the same and make you understand it. Also they lied to you. The cleaner is applied just once. After application of the dye, you just wipe it with a cloth. If you again clean it with cleaner, you are hiding the cracks. However, cracks doesnot mean the welds have failed. You need to refer to right standards to determine that.
With all due respect, An IES officer should've been there in the place of an IAS officer. That not only would ensure quality, but would ensure efficiency at the same time. And efficiency is what our country desperately needs in order to become a developed country instead of a developing one!!
Thanks to DM that he conducted this kind of genuine inspection but the thing is that as per construction management procedures, the incharge of the site has to conduct this kind of detailed investigation on daily basis. That impatientness and mis conduct of operation shows that the incharge is not doing his job properly at all.
Its not important if a IAS is qualified for checking this type of engineering work. Its is very important for an IAS to check this work becoz it is public property and very less IAS people check the quality of work on site.
@RationalThinker ur right. SDM belongs to adminstrative department. Civil engineering works is most corrupt area in india and an administrator should check all the technical and non technical process.
Wah yaar kya IPS.. faltu ki galtiyan nikal rha hai jo bnda thda stressed hai uski. He seems too confident in finding mistakes. He should boost confident instead of finding mistakes.
You do two things immediately right after you see my comment 1. Diffrence between a IAS and IPS 2. TAke online grammar courses and read newspaper daily..
Exactly that why state government projects have so much faults because they don't have good post of Engineering responsible for engineering work ya pwd bridge corporation have many works of engineering stills comes under IAS which is wrong all Engineering work of state should be under pwd as they have engineers
Well IAS officer only ensures that the employee's are doing their work properly and whenever they are out to inspect such things they have one member from that field with them.
@@dhiruph with this mentality u can never be an ias officer🙂🙂🙂if u want to be🙂 I m damm sure u will comment some worst, so before commenting introspect why this is given.
I have worked as quality control engineer in a pipe industry where weld quality is most important aspect and there are various test to check welding quality. DPI is one of them which is used for surface crack . However X-ray or Ultrasonic is most reliable techniques which should be done regularly. And there should be some destructive test like tensile and compressive, flattening to find over all weld quality.
Its a part of NDT... It seems they are in hurry so crack would not be shown or developed... A cycle of this test needs 20 to 30 min time to see the fine line... Perhaps this job(work piece) is not as important other wise they will test it with patience...
Sir, It's was Liquid Penetration Test(LPT), & it required ASNT level- II person. FITTER fit-up the 2 piece of material which is going to weld with proper ASME/API section. A grinder get the finishing of weld with proper safety.
Radiographic testing (X RAY) is recommended for welding inspection. Obviously DPT is inexpensive and available in field condition but it has some limitation as it's principal is based on capillary action. DPT can't detect void in welded joint.
DPT test is surface defect test Principal is based on capillary action 1) step clean the surface 2) apply cleaner and remove by lintcloth 3) apply the penetrant after applying penetrant start progating in to defect area for this 10 minutes dwell time is given the after that again remove the penetrant by using cleaner no penetrant shall be seen on surface so that after applying the developer only penetrant which is progated in defect will bleed out if any defect is seen analysi and repair inspection shall be done by level 11 person
When everybody tries to impress the IAS officer..but rather confuses him. Don't know the actual scenario , but these r pure technical field and I think for such inspection trained professionals must be hired. Also don't think fr structural application dye penetration is a reliable method.
This IAS is trying hard to justify his existence as an officer even when he doesn't know anything about the job being done. Better to have inspection done by people who are qualified to do so. Publicity stunt is good.
He is cross checking whater the experts are giving correct information or not he have his experts with him it's just to ensure that no one is corrupt and sending the wrong report to the office it is very easy to hire people but you heve to keep a eye on just like you keep on checking everything when you build your house have some respect for him bro in this kind of projects karoro ka gotala happens and later on accedent happen IAS for a reason great man
For ur kind inf let me know u IES is already there Every work is tested at many levels je,Ae, executive and according to tender value (by superintending engg) But since DM is highest authority of all departments in a district he is supposed to give final assent (tech inspection is not his part of job he is a good officer because he's trying to learn all these)
Deepak sir.... Iam huge fan of you.... Ihope you read this..... Its a 6G testing of welding.... And every critical welding should be tested in RT. Anyways if it is a DPT..... The surface should be clean thoroughly with cleaner .... After that penetrator should be put and developer should be used to find any pin holes and all. Test should be conducted by a quality Engineer not by a fitter or a welder... Every joint should be done by a 6G welder and he/she should carry a valid welder card for that..... Hope to get a better uttarakhand... Regards A true uttarakhandi❤
Namaskar Sir Welding Ka DP Test bhi dekh liya DP Check karne ke baad welding mai Pin hole ho jata hai to welding theek nhi hua hai Kya baat hai sir Salut hai sir apko
I work in a public department for the government of Queensland, and have to see my states Premier every now and then. We call her by her name , we never call he MADAM. It is my dream to see India change for good and I hope one day it will.
Sir fitter checks for fitting of plates. Generally for speeding up process welder and fitter both are pressed to work to utilise maximum efficacy. As welding equipment is costlier (like on site electricity generator and inverter welding equipment) overall cost lowered when used in combination. I think fault check was explained well in last so no comments on that.
Wrong procedure for dye penetrant test showed to DM Step 1 - apply cleaner/remover and wipe off Step 2 - apply dye on the surface, the wipe off dye with cloth. Step 3 - apply developer, so that dye come out of defect holes.
Best idea to test this is :- by using a light bulb or simple phone flashlight 👍 one man will go inside the box and one will show light from top ... When the light will seen by inner man he has to mark there with chalk , and then weld it 👍 ..... I am a non degree mechanical engineer 🙏 jai hind 🇮🇳
Only NDT Level-II certificate holder can perform Dye Test and sign report on it Shocking that fitter was performing Dye Test. Also, Dye test can only detect surface deformation, UT or radiography is best to detect internal deformation.
Yeah ..that was very unprofessional..Even the Engineers didn't knew the Dye Penetration Test procedure.. There is a huge gap in the education system.. Being an Engineer..I started my career as an NDT Tech
They are not CBI, Why should he go against any political leader he is their to provide administration for the laws and schemes made by govt for people of India. Why people vote for dishonest political leaders, it's the duty of people to unite against those political leaders who are corrupt. Corruption in politics can only be removed by people who vote. But people doesn't have time for thinking and acting for right causes and like to blame officials for their own failures. Most of the people have became selfish , they only think about themselves then how come there will be change and honesty. It must start from the base level. There is a lack of morals in public of our country they only like to play a blame game .
big political leader ? that's where we as a voter to choose a good candidate. we voluntarily elect a corrupted person and later ask the administrative officer to arrest/inspect ?
@Deepak rawat sir, I am a safety officer according to factory act 1948,there should a fine imposed of Contractor for not using Ppe such as face sheild or Safety google. Sir huge fan of yours.
सर हमें आपके जैसे ही आईएएस अफसरों की जरूरत है मैं सीएपीएफ का जवान हूं। ऐसा नहीं है कि हमारे डिपार्टमेंट में आईपीएस नहीं है लेकिन जो भी आईपीएस है उन्हें ग्राउंड नॉलेज बिल्कुल भी नहीं है दिल्ली के एसी कमरों में बैठकर बहुत ही कंफर्टेबल फील करते हैं लेकिन ग्राउंड में क्या हो रहा है इस चीज के उन्हें भनक भी नहीं है और जिन्हें भनक है जिससे कि सीआरपीएफ forces mein भ्रष्टाचार चरम सीमा पर है
Being INDIAN… I’m very sad to say … that … INDIA is great country… theoretically but practically our country is far behind to be a great country… because every one or mostly people are self centric…. Some people like to do buttering and also some people like to get buttered….
Dekhne se lagta hai apke aane pr hi sari tyaari ki hai company walo ne Die protection coating Rust removal spray or cleaner spray botal sab aaj hi use ki hai tabi baar baar glat kr rhe the.grinder machine oprate karne wale fitter ne hand glubs tak nahi pehne incident hone ka khatra bahut jyada hota hai cutter machine or grinder machine par work karte time.👍
I wonder how much tests they have done before.they didn't knew proper process,welder was not appropriate for that job . Finally the guy who done testing was probably with higher post who fortunately had some knowledge .
He is trying to bully the fitter. At least have humanity and give him time to think and speak. You are acting like a feudal lord of the people. This type of arrogance should not be tolerated.
You are doing great job. But please be careful that no poor people can get punishment like suspend. Please give them warning. They may be the bread and butter of the family. My humble request. 🙏🙏🙏🙏🙏
Sabse best video sir ki 4ladko vali hi h 😂😂🙌
Konsi video bhai link bhejo
Bhai sir ki har video best hai
Ha wo computer coaching wala 🔥😂😂
Sai me funny the full
हीरा सुपारी वाला🤣🤣🤣🤣
Sirji, I am a certified welding engineer. The first thing you must watch for welding inspection is a PWPS and WPS. That would determine the whole scenario. Next time ask the enginner to provide you with the same and make you understand it. Also they lied to you. The cleaner is applied just once. After application of the dye, you just wipe it with a cloth. If you again clean it with cleaner, you are hiding the cracks. However, cracks doesnot mean the welds have failed. You need to refer to right standards to determine that.
Great reply...👌👍 They also performed DPT on final welded built up which is also wrong.
I am certified mechanical contractor & Engineer.....😉😁😂👍
You subscribe krk😂😂
Correct
Also they need UT to identify
Exactly.. Spraying the cleaner on the penetrant directly hides all defects.
Next cm of uttarakhand deepak rawat sir....kaun kaun sehmat he is bat se....🙋
Just want to be same officer with this great passion in his work
My class is 12 and I am still loving it
With all due respect,
An IES officer should've been there in the place of an IAS officer.
That not only would ensure quality, but would ensure efficiency at the same time.
And efficiency is what our country desperately needs in order to become a developed country instead of a developing one!!
Agreed
Yes I agreed...An IES is supposed to check that stff 👋
Yes you are right
Here fitter testing welding test.and grinding..
moreover sir needs to do homework before visiting the sites...
Agreed
We want more IAS officer like Deepak rawat sir ❣️❣️🙏
ruclips.net/video/xHJhnOpfWDU/видео.html
He is more like a poster boy rather then being as IAS
Aap jese IAS sir sb jagah hone chaiye...👍👍💐💐💐 salute to your work and honesty.🙏🙏🙏🙏👏👏👏
This is called content creator 😅🤣😂🙏
सब लोग भगवान से🙏प्रार्थना करना हमारे जवान🇮🇳शहीदों की आत्मा को शांति दे🇮🇳🙏🏻🎉
Trinkejo
IAS की वास्तविक तैयारी तो ट्रेनिंग के बाद surru होती है😂🔥🔥🔥💯💯🤗🤗🎊🎊🎉🎉
Deepak sir ka style aur kauf dekh ke mza ata hai yr... respect to this man..❤❤
Very good work! Sir, I think our India All's IAS officer's Motivat from your good work .so very thanks sir!👌🏻👌🏻👌🏻👌🏻👌🏻👍🇮🇳
मै ने तो डाटा भाई नई... साहब आपकी आवाज ही काफी है।
🙏🙏🙏🙏🙏
जय जय श्री राम।
हर हर महादेव।।
🚩🚩🚩🚩
जय श्री राम
Main aaj video ka hi intezar kar rahi thi aur video a gai Mera Sunday happy Ho Gaya ❤️🤣
😂❤️
😎😋ha aagi vdo
आप जैसे बेउरोक्रेक्ट हर जिले में हो ।तो देश बदल जाये।🙏🙏🙏🙏🙏
Insaan ho apke jaisa jo always dusro ko samjhe 👍👍
आपके पहले जोश भरे कदम से पता चलता है, कि आपकी सफलता कितनी बड़ी होगी ।
Right neha ji
Thanks to DM that he conducted this kind of genuine inspection but the thing is that as per construction management procedures, the incharge of the site has to conduct this kind of detailed investigation on daily basis.
That impatientness and mis conduct of operation shows that the incharge is not doing his job properly at all.
Dear sir
1 Unsafe activity ,grinder used without safety goggles.
Whenever grinder is used goggles are essential PPE
Yes sir but they people totali wrong not flow safty rule safty faste
Wrong DPT Test
Its not important if a IAS is qualified for checking this type of engineering work. Its is very important for an IAS to check this work becoz it is public property and very less IAS people check the quality of work on site.
@RationalThinker ur right. SDM belongs to adminstrative department. Civil engineering works is most corrupt area in india and an administrator should check all the technical and non technical process.
Yeah that's very important for our country
Pass ho gya sunte hi sb khush ho gye.. Sir ne pass kr diya🤣🤣🤣🤣🤣🤣🤣🤣
Karnataka needs an ias officer like u sir god bless u sir
Ravi channanavar is there as ips.. What more u want
@@vivan3996 Duffer, IAS and IPS are 2 different depts. Duffer.
Those engineer who finally become IAS officers, must love this testing or inspection
3:27 the best part 👍
बहुत अच्छा कार्य कर रहे हैं सर आप, काश हर अधिकारी ऐसे होते🙏
Hai kya ya
हरिद्वार के डीएम
Whensoever I watch you, zeal to crack the exam increase multifolds. Best regards and keep rocking.
We want more as like Deepak sir,,,purre desh mai sudhr ho jayega,,,, salute sir ji
Wah yaar kya IPS.. faltu ki galtiyan nikal rha hai jo bnda thda stressed hai uski. He seems too confident in finding mistakes. He should boost confident instead of finding mistakes.
IAS
You do two things immediately right after you see my comment
1. Diffrence between a IAS and IPS
2. TAke online grammar courses and read newspaper daily..
Inspecting an engineering work by an IAS officer will still promote loopholes in work.
Exactly that why state government projects have so much faults because they don't have good post of Engineering responsible for engineering work ya pwd bridge corporation have many works of engineering stills comes under IAS which is wrong all Engineering work of state should be under pwd as they have engineers
Because of stupid reservations.
🤣🤣🤣🤣
Well IAS officer only ensures that the employee's are doing their work properly and whenever they are out to inspect such things they have one member from that field with them.
@@dhiruph with this mentality u can never be an ias officer🙂🙂🙂if u want to be🙂
I m damm sure u will comment some worst, so before commenting introspect why this is given.
I have worked as quality control engineer in a pipe industry where weld quality is most important aspect and there are various test to check welding quality. DPI is one of them which is used for surface crack . However X-ray or Ultrasonic is most reliable techniques which should be done regularly. And there should be some destructive test like tensile and compressive, flattening to find over all weld quality.
Magnetic particle inspection test is also reliable and cheaper. Most important it demands less expertise compared to x-ray and ultrasonic testing.
Its a part of NDT... It seems they are in hurry so crack would not be shown or developed... A cycle of this test needs 20 to 30 min time to see the fine line... Perhaps this job(work piece) is not as important other wise they will test it with patience...
Aap aur aapki soch bahut achchi hai ...Rawat ji......बड़े पेट वालों का इलाज कुछ है ही नही इंडिया में लिख के लेलो मुझसे।
I love dis man. Man of honor, man of respect , man of intelligent ,
Sir,
It's was Liquid Penetration Test(LPT), & it required ASNT level- II person.
FITTER fit-up the 2 piece of material which is going to weld with proper ASME/API section.
A grinder get the finishing of weld with proper safety.
Yeah I also a NDT TECHNICIAN.
Radiographic testing (X RAY) is recommended for welding inspection. Obviously DPT is inexpensive and available in field condition but it has some limitation as it's principal is based on capillary action. DPT can't detect void in welded joint.
NDT
Sir Radiography test is performed on butt weld joints only and these are fillet weld joints...
Very informative video sir.. mujhe nahi pata tha welding test aise hota hai.. thank you for this inspection and sharing this informative video
Aap jaise officer ki Bharat ko bohot zarurat hai
After seeing the comments, it's good to know that our youth is well versed in their respective field.
DPT test is surface defect test
Principal is based on capillary action
1) step clean the surface
2) apply cleaner and remove by lintcloth
3) apply the penetrant after applying penetrant start progating in to defect area for this 10 minutes dwell time is given the after that again remove the penetrant by using cleaner no penetrant shall be seen on surface so that after applying the developer only penetrant which is progated in defect will bleed out if any defect is seen analysi and repair inspection shall be done by level 11 person
Sir very proud of you if all officers will be like you our nation would be on top
With great respect I appreciate you work and dedication
Sir we want in every district one Deepak Rawat Sir.Then India become corruption free.
The most awaited video ,please upload videos of this lenght sir, wishing you a healthy life 👍
When everybody tries to impress the IAS officer..but rather confuses him. Don't know the actual scenario , but these r pure technical field and I think for such inspection trained professionals must be hired.
Also don't think fr structural application dye penetration is a reliable method.
Jdm bada chutiya hai
Exactly..
Me too noticed the same..inspite of impressing him they managed to confuse him..every sector has these kind of people.
Very right bilkul sahi likha hai
Sir ke Jaise IAS officer Country ke Sabhi District me Hona Chahiye 👌
Sir's videos inspire IAS aspirants so much
Maturity is when you realise this is not the official channel of IAS Deepak Rawat 😂.Just a fan made page
Bhai ye official hai!!!
@@upscjourney-thedreamcalled7628 channel ke about ke jao
This IAS is trying hard to justify his existence as an officer even when he doesn't know anything about the job being done. Better to have inspection done by people who are qualified to do so. Publicity stunt is good.
He is cross checking whater the experts are giving correct information or not he have his experts with him it's just to ensure that no one is corrupt and sending the wrong report to the office it is very easy to hire people but you heve to keep a eye on just like you keep on checking everything when you build your house have some respect for him bro in this kind of projects karoro ka gotala happens and later on accedent happen IAS for a reason great man
For ur kind inf let me know u IES is already there
Every work is tested at many levels je,Ae, executive and according to tender value (by superintending engg)
But since DM is highest authority of all departments in a district he is supposed to give final assent (tech inspection is not his part of job he is a good officer because he's trying to learn all these)
Deepak sir.... Iam huge fan of you.... Ihope you read this.....
Its a 6G testing of welding....
And every critical welding should be tested in RT.
Anyways if it is a DPT.....
The surface should be clean thoroughly with cleaner ....
After that penetrator should be put and developer should be used to find any pin holes and all.
Test should be conducted by a quality Engineer not by a fitter or a welder...
Every joint should be done by a 6G welder and he/she should carry a valid welder card for that.....
Hope to get a better uttarakhand...
Regards
A true uttarakhandi❤
Namaskar Sir Welding Ka DP Test bhi dekh liya DP Check karne ke baad welding mai Pin hole ho jata hai to welding theek nhi hua hai
Kya baat hai sir Salut hai sir apko
Most honest officer I have seen .
I work in a public department for the government of Queensland, and have to see my states Premier every now and then. We call her by her name , we never call he MADAM. It is my dream to see India change for good and I hope one day it will.
Abhishek ji yeh India h aur uparse shriman IAS h 😂 is janam me to na ho payega yeh change India me.
Sir aapko dekh ke bruce Lee ki yaad aatai hai itna active or handsome😍 🙏
D.M sar tusi Grate to sab aap jase ho to hindustan Amrika ban jave ga rab aap nu lambi umer dave jai hind sir
Sir fitter checks for fitting of plates.
Generally for speeding up process welder and fitter both are pressed to work to utilise maximum efficacy.
As welding equipment is costlier (like on site electricity generator and inverter welding equipment) overall cost lowered when used in combination.
I think fault check was explained well in last so no comments on that.
Wrong procedure for dye penetrant test showed to DM
Step 1 - apply cleaner/remover and wipe off
Step 2 - apply dye on the surface, the wipe off dye with cloth.
Step 3 - apply developer, so that dye come out of defect holes.
As well as keep 25 cm away from spraying
Wrong procedure for DPT shown
What type of engineering team is it ?
@@mukhtarkhan1538 what's the right procedure then?? Kindly let us know guruji
Cost savings use the same cloth and apply dye before the cleaner is dried off. What a Mucken circus...
यही हमारे देश का दुर्भाग्य है जिसे जहाँ नहीं होना चाहिये वो वहाॅ है
There are some officer who are sleeping in ac room but u r real ias officer
महात्मा गांधी = गाँधीगिरी
नरेंद्र मोदी = नेतागिरी
दीपक रावत = प्रश्न पूछतगिरी 😂
Bhai puchna hi padta hai knowledge aise hi badti hai 🙄
Uttarakhand ke Dalal hai yah sab
Bas pucho sunno kisi ki na
@@DeepuPlayz18 right
Pappu= comedy giri
That's method comes under NDT i, e Non destructive testing method and this method is know as liquid Penetration method. Very easy but need attention.
Yes. Some expert in quality of welding must hv accompanied with Deepak Rawat sir. Contractor befool those who are not expert in this field.
I think you are very honest than other IAS Officers .
Toughest time for these people infront of rawat sir 🤣🤣🤣🤣🤣
Best idea to test this is :- by using a light bulb or simple phone flashlight 👍 one man will go inside the box and one will show light from top ... When the light will seen by inner man he has to mark there with chalk , and then weld it 👍 ..... I am a non degree mechanical engineer 🙏 jai hind 🇮🇳
This kind of test is super flop because crack formed can be complex
That's why u don't know anything about structural things👍
हाहाहा, भाई जुगाड के बाहर भी एक दूनिया है।
Cracks can be very minute, dye pentrant and ultrasound are few scientific way to find them, not torch light.
Ab is site ko ye sab log bar bar sikhenge or proper sikhayenge 👌👌👌👌👌👌👌👌
Sir Aap etna bariya kam kar raha he na bash dill khus ho gya
Only NDT Level-II certificate holder can perform Dye Test and sign report on it
Shocking that fitter was performing Dye Test. Also, Dye test can only detect surface deformation, UT or radiography is best to detect internal deformation.
Yeah ..that was very unprofessional..Even the Engineers didn't knew the Dye Penetration Test procedure..
There is a huge gap in the education system..
Being an Engineer..I started my career as an NDT Tech
Bhai DM ko kya pta kayse hota hai
Oh to hm engineers ko pta hai n ki test glt kiy hai sb😂😂
Etne pass se spray kiya gya test sb barbad ho gya😂😂😂
@@abhijeetshrivastawa6827 Han...dwell time bhi nahi diya
Yes
Sir i want to be an IAS like you in future.
Lo bhaiiii ek or prajati 😂😂😂
@@abhipandey4198 Haji bhai lol
Beta study krni padti hai
@@dollartoomuch2950 Tho kisnebola study nahi karna hai? dimak karak hai kya?
Bhaiii dimag sahi se likh le kya ias Banega ve tu....😂😂
सर आपके जैसा हर किसी को होना चाहिए हमारा देश सुधर जाएंगे धन्यवाद सर
सबकी हवा टाईट 😅🤣🤣
Salute to you sir🙏🙏
If this man is truly honest then he must take some action at least one big political leader but never did like this because he is a show-off king. 👍
They are not CBI, Why should he go against any political leader he is their to provide administration for the laws and schemes made by govt for people of India.
Why people vote for dishonest political leaders, it's the duty of people to unite against those political leaders who are corrupt.
Corruption in politics can only be removed by people who vote. But people doesn't have time for thinking and acting for right causes and like to blame officials for their own failures.
Most of the people have became selfish , they only think about themselves then how come there will be change and honesty.
It must start from the base level.
There is a lack of morals in public of our country they only like to play a blame game .
big political leader ? that's where we as a voter to choose a good candidate. we voluntarily elect a corrupted person and later ask the administrative officer to arrest/inspect ?
Questioning is the begining of intiligence sir questions evry thing 😂
GOD BLESS YOU DEEPAK RAWAT JI JAI HIND JAI BHOLE NATH JAI BHARAT
A good work by Deepak Rawat IAS Sir Big Fan
मै ये सोच रहा हूं कि ऐसे ही सभी अधिकारी क्यों नहीं होते।
Sir aap great ho 😍😍😍😍😍😍😍😍
Thanks❤❤❤
India needs this kind of officer I salute you
Please give us some tips To crack I. A. S. Exam
Har state mei aisa officer hona jaruri hai 👍👍👍 jai hind 🙏
People who are watching this comments, l wish there parents still Alive for more than- 💯+ years, God bless U & U R family 😇❤️
3:27😂 ohhhhhhhhhhhhhhhhhhhhhhhh
Sabka fat gya saaallllaaaa 🤩🤩🤩👍❤️❤️❤️❤️... very good sir 👍👍👍
@Deepak rawat sir, I am a safety officer according to factory act 1948,there should a fine imposed of Contractor for not using Ppe such as face sheild or Safety google. Sir huge fan of yours.
Deepak sir me v ap ki trah ek IAS officer bn na chate h 🙏🙏🙏
बड़े अधिकारीयो के पास जाओ
हमेशा गरीब मजदूर और आम आदमी पर ही करवाइए करते हो
सर हमें आपके जैसे ही आईएएस अफसरों की जरूरत है मैं सीएपीएफ का जवान हूं। ऐसा नहीं है कि हमारे डिपार्टमेंट में आईपीएस नहीं है लेकिन जो भी आईपीएस है उन्हें ग्राउंड नॉलेज बिल्कुल भी नहीं है दिल्ली के एसी कमरों में बैठकर बहुत ही कंफर्टेबल फील करते हैं लेकिन ग्राउंड में क्या हो रहा है इस चीज के उन्हें भनक भी नहीं है और जिन्हें भनक है जिससे कि सीआरपीएफ forces mein भ्रष्टाचार चरम सीमा पर है
Mujhe to sir ki video sab pashnad hai 😍😍😍🥰🥰🤗
Being INDIAN… I’m very sad to say … that … INDIA is great country… theoretically but practically our country is far behind to be a great country… because every one or mostly people are self centric…. Some people like to do buttering and also some people like to get buttered….
Good work sir❤️❤️🇮🇳🇮🇳🇮🇳
Dekhne se lagta hai apke aane pr hi sari tyaari ki hai company walo ne Die protection coating Rust removal spray or cleaner spray botal sab aaj hi use ki hai tabi baar baar glat kr rhe the.grinder machine oprate karne wale fitter ne hand glubs tak nahi pehne incident hone ka khatra bahut jyada hota hai cutter machine or grinder machine par work karte time.👍
Jitna bhi tarif ki jaye wo kam h sir love u sir
3:54
He : ghabarana nhi .
Worker : * does what he wasn't supposed to do * 4:18
😆😆😆
sir ap na mask nhi dala hai corona bapis lana hai kya plz mask dalo 🙏🏻🙏🏻
Plz watch discrimination, it's 2019 video
Meanwhile those being inspected: "अब तू ही हमें समझा, राह भूले थे कहां से हम,
कानों में जरा कह दे, कि आएं कौन दिशा से हम।" (Part of prayer)
Deepak sar aap bahut achcha kam kar rahe ho hamare Desh mein koi apni jimmedari se Kam nahin karta
I wonder how much tests they have done before.they didn't knew proper process,welder was not appropriate for that job . Finally the guy who done testing was probably with higher post who fortunately had some knowledge .
He is trying to bully the fitter. At least have humanity and give him time to think and speak. You are acting like a feudal lord of the people. This type of arrogance should not be tolerated.
Sir Bohot mast video he 🙏 mja a gya 😘😘😘
Agar sab kuch mil jayega zindigi me tammanah kiski ki karoge 🔥 kuchh adhuri khwaeshe zindigi jeene ka maza deti hai 🔥🔥🔥
Sirr mask🙏🏼🙏🏼🙏🏼
Bhai sardiyo ki vdo h ye😂🤣
2019 ki h check description
Sir for doing this test a qualified NDT TECHNICIAN MUST be present..its not the fitter responsibility after welding...
You are doing great job. But please be careful that no poor people can get punishment like suspend. Please give them warning. They may be the bread and butter of the family. My humble request. 🙏🙏🙏🙏🙏
Deepak sir ka kaam bahud badiya hai Bhagwan aapko hamesh khus rakhe sir ,,
sir aap log mask bhi pahen lijiye plz