How To Polish & Ceramic Coat A Motorcycle Helmet

Поделиться
HTML-код
  • Опубликовано: 25 окт 2024

Комментарии • 45

  • @4agePower
    @4agePower 5 лет назад +3

    If it has paint, Sandro's got this. #1 - Awesome!

  • @thetraindriver01
    @thetraindriver01 5 лет назад +2

    A nice twist on ceramic coating, first vid of this type I have seen, thanks Sandro, the lid looks great 👍👍

  • @fastmonaro05
    @fastmonaro05 5 лет назад +1

    Wow!!!!!!!! Even a helmet. Crickey you are very creative with your skills. Well done......again.

  • @chavezcustomdetailing9540
    @chavezcustomdetailing9540 5 лет назад +2

    Bravo Master Sandro👏 You are a true artist even making a helemet look like new. Amazing work as always my friend.👍

  • @Clint_L
    @Clint_L 5 лет назад +1

    Nice one Sandro. Always informative my friend

  • @andylai-fz6uc
    @andylai-fz6uc 5 лет назад +1

    nice. I was actually waiting for you to polish and coat an Avocado.

  • @jasonphillips3865
    @jasonphillips3865 5 лет назад +4

    Your skills know no bounds my friend. I'm going to try this on my Arai. 😃

    • @CenobiteBeldar
      @CenobiteBeldar 4 года назад

      Hey man, how did your polish go? I've got the Corsair X and I'm thinking about polishing mine. I paid a lot of money for mine, so I'm going to take it seriously lol Arai recommends cleaning the helmet with just water, but I want to make sure I keep it shining too.

    • @jasonphillips3865
      @jasonphillips3865 4 года назад +2

      @@CenobiteBeldar.I hand polished my Arai Rebel with Meguiars Ultimate Compound and then added a layer of Turtle Wax Sealant. Came out really nice and who doesn't love a polished helmet 🤣🤣

    • @CenobiteBeldar
      @CenobiteBeldar 4 года назад

      Jason Phillips I do! But I don’t wanna fuck up the coat quality or paint.

    • @jasonphillips3865
      @jasonphillips3865 4 года назад

      @@CenobiteBeldar.Hand polishing is very gentle. No heat so no damage to the clear coat.

  • @conevans9982
    @conevans9982 5 лет назад +2

    Great video as always 👍

  • @tiukawni
    @tiukawni 5 лет назад +18

    next video how to polish a bald guy head and ceramic coat it

    • @tiukawni
      @tiukawni 5 лет назад

      i was going to voluntary but i am not bald XD

  • @rehman.fahid91
    @rehman.fahid91 5 лет назад +1

    Nice to see someone use the benefit of automotive paint coatings on other things as well as cars.. excellent video Sandro! I’d hope for you to next make a video of a glass sealant used in the home for the use of a Perspex shower screen or something similar as I’m thinking of doing something along those lines for ease of cleaning :)

  • @michaelclough9499
    @michaelclough9499 5 лет назад +1

    Hey Sandro, thanks for the videos. I've only in the last few weeks found your channel but I've got to say you've really inspired me. I've always enjoyed cleaning my cars but I've never been satisfied with the finish and I've lacked the knowledge to do anything about it.
    I've watched a good few of your back catalogue over the last few weeks and can not wait to get back home and get stuck into my cars. I've not got a huge budget but I've been looking at random orbit rotating polishers and a few other brushes and the like and will be picking it all up when I'm back in a few weeks.
    I'm not going to lie, I'm pretty nervous about making matters worse! However, I'm just going to take it slow, start conservative and kick things off on my aging motorway mile muncher first. That would be my 2011 Mazda 6, it's a flecked black paint and is by far the most scratched and swirl-marked. The nice car is a 2013 Alfa Romeo Guilietta, it's gloss black with a slightly matt silver/grey roof and though it's got consistent swirls everywhere, it's nothing major and there's no scratches through the clear. Do you have any experience with either of these cars or the paint the manufacturers use? I know your Alfa is probably similar but not sure if the quality is the same or if their process changed.
    I wonder if you could give me a starter for 10? Obviously cleaning is the easiest bit, and the least invasive, so I think I'm OK with that. But once the prep is done, what kind of compounds and pads should I use for each car and could there be a one trick combo that could get me great results on both, is available in the UK and good enough (not in your usual vocabulary, I know!) for a rank amateur? I'd be keen to hear your thoughts.
    Keep up the great content! Now it's back to the helmet...

    • @michaelclough9499
      @michaelclough9499 5 лет назад +1

      @@CarCraftAutoDetailing Sandro, thank you so much. I found a UK retailer that stocked everything you mentioned and all for just under £230 which is great! I know what I'll be watching for the rest of the night now! Thanks again for all the great content, helping others to protect their investments and for sharing your experience!

  • @j4s0n67
    @j4s0n67 4 месяца назад +1

    im guessing the technique and tools for polishing an motorcycle helmet is exactly the same with car polishing?

  • @JordanWells
    @JordanWells 5 лет назад +1

    Hey Sandro! Great video as usual. I did have a question related to a previous video - “A Guide to Restoring Car Paint”
    In that video, you used Scholl S3 Gold XXL and S30+, which I have been using and falling in love with lately. I tend to deal with a fair amount of soft/soft black vehicles and S30+ has been doing well, however I’ve only been using it on an orange HDO polishing foam. Occasionally I will see some pig tails in the paint that sometimes go away with another pass and slightly more pressure. I was going to try it with a black HDO finishing foam like you used in the video, but Scholl recommends against that. I’m assuming it’s because they’re afraid the abrasives won’t fully break down? Assuming you use S30+ often, or have in the past, how do you feel it works with the softer finishing pads on difficultly soft clears?
    Thank you!

    • @JordanWells
      @JordanWells 5 лет назад +1

      Car Craft Auto Detailing
      Thank you for the reply!
      Obviously I know it depends, but what would you say is your “go-to” or general favorite finishing polish combo on soft/sensitive/finicky vehicles? I like Reflect a lot, especially before coating because it is so clean to work with, but found it to be difficult to get it to finish down perfectly at times.

  • @deandadon8184
    @deandadon8184 Год назад

    Great video! Question, how would you go about fixing a deep ding the size of a grain of rice in a gloss finish helmet? Would you need to fill it with something and then polish? Also, how would you go about polishing like in this video but by hand?
    Thank you!

    • @CarCraftAutoDetailing
      @CarCraftAutoDetailing  Год назад

      Thanks. Polishing by hand is really the same process, just using hand applicator pads and spending about 5-10 times long polishing in circular motion by comparison.
      It sounds like you may need to sand, use body filler, sand again and then apply primer, base coat and clear coat to fill and finish a ding. But that’s honestly not my area of expertise and I’d also be a little worried that the ding hasn’t compromised the helmets crash protection integrity.

  • @felipepaz4306
    @felipepaz4306 4 года назад

    hi man, just a quick question. can I reuse the foam block applicator for future coatings ? cheers

  • @gregpsimos5388
    @gregpsimos5388 Год назад +1

    I was wandering what the condition of the helmet right now, cause I heard rumors that ceramic coating could destroy the varnish of the helmet

    • @CarCraftAutoDetailing
      @CarCraftAutoDetailing  Год назад

      Helmet is in great condition, a ceramic coating will not effect any safety or degrade the finish at all, it will however give better UV protection and a longer lasting like new condition 🙂

  • @RaVAndres
    @RaVAndres 3 года назад +1

    Thanks for the video! I did it on my Shoei GT AIR II insignia, now I have to clean it, what you use to eliminate bugs and debris after ceramic coating?

    • @CarCraftAutoDetailing
      @CarCraftAutoDetailing  3 года назад +1

      A waterless wash product like Carpro Ech2O (1:15) is what I personally use.
      I did a video on using it to clean my bike, but the same techniques are used to clean the helmet as well. It can also help to use compressed air (if you have it) to blow the surface of the helmet first which can remove most of the debris first - even some bugs - before the waterless wash. Here a link to that video:
      ruclips.net/video/Fk3cIjGfQLc/видео.html

  • @boofstien2
    @boofstien2 4 года назад +1

    Hey sandro. I just got back into motorcycling after a few years away. I have around half a bottle of Cquartz uk so was thinking of hitting my new bike with it. How much of it should I do? all painted surfaces and frame, Headlights and rear lights, wheels?. I have seen some on redit apply it to the exhaust can and engine. What would you recommend? i have some dlux too which I will use on the unpainted plastic trim pieces.

  • @Rohan-qr1zn
    @Rohan-qr1zn 4 года назад

    How is the UV protection and resistance to fading

  • @Seraphact
    @Seraphact 4 года назад +1

    I don't see the brand of ceramic coating you used... Do you know what brand?

  • @pavo555
    @pavo555 4 года назад

    Would you put ceramic coating on visor as well if it was full face helmet??

  • @The-Advent-Sabre
    @The-Advent-Sabre 5 лет назад +4

    Did I actually just watch a video of a guy polishing his helmet?!

  • @onetrueone
    @onetrueone 3 года назад

    He literally said you don't need to pulse it with those special infrared lights but he did anyways

    • @CarCraftAutoDetailing
      @CarCraftAutoDetailing  3 года назад

      May be a little confusing but you don’t need to IR cure most ceramic coatings - the one I used does however need IR curing.

  • @migsvensurfing6310
    @migsvensurfing6310 5 лет назад

    I have to try it on my girlfriend.

  • @kakashi99908
    @kakashi99908 5 лет назад +1

    No water beading demonstrating? haha just kidding

  • @kmpaton
    @kmpaton 4 года назад +1

    Motorcycle helmets should be replaced every 5 years anyway. So you may only need to do this once.

  • @Jethro.Maloku-le.Rey.Kalsitran
    @Jethro.Maloku-le.Rey.Kalsitran 5 лет назад

    alcohol doesn't work with wax...