Free Energy Project Dual LG Smart Drive WIND TURBINE second stator
HTML-код
- Опубликовано: 28 авг 2024
- Free Energy Project Dual LG Smart Drive WIND TURBINE second stator
To see my overall design watch this video first
• New FREE ENERGY projec...
I had to buy and fit a second stator for my wind turbine project also lot's about the different types of stators in this video.
Many Thanks
Enjoy the video !!
Bravo profesor une poe bëj me uje mendihmo
Gavins Windpower Workshop , interesting build , its a bit of work but better than wasting life in front of a tele , thats how ive always looked at things.
Yes mate, Wanna learn about wind turbines while I live somewhere windy !!
@@GavinFreedomLover you definitely live in a nice windy location, its crazy windy here today , you only have to travell 500 meters and its farm land zero trees anywhere and real good turbine territory , i used to bolt turbines to a trailer and park out in the open plains to see if the turbines i bought were accurately rated.
I've always fancied doing that , the otherpower guys I remember seeing them do it
great video
Hi the important parameter is the number of turns on each coil. more important if the stators are connected in parallel electrically less so if in series.
You can try to stagger the coils between the stators to reduce cogging distance/Arc.
rounding the lamination edges with a file do the same , and or twisting them on a very slight angle, pretty hard to do on the ones i had
great one! this is coming together beattifully ;)
Yes mate hopefully it will make some good power !!
The important parameter is the number of turns on each coil and ideally they should be the same on both stators.
You can stagger the coils between the 2 stators to reduce the cogging distance/Arc.
Thanks for the info mate , I don't think the cogging is enough to slow the blades that I have , I need to get the re-wire right so that it can spin up to the correct voltage first.
May want to cover the coils when welding. 1 spatter ball could melt the enamel.
Bit late now but I will next time, thanks for the comment.
It is not necessary to make a winding with thicker AWG wire just divide like 36 coils in two generators of 18 coils and connect to Delta ... doing this will reduce the voltage by 26 to 30v amperage can reach more than 10 amps -----(Não é necessário fazer um enrolamento com fio AWG mais grosso é só dividir como 36 bobinas em dois geradores de 18 bobinas e ligar na Delta ... fazendo isso vai reduzir a voltagem em torno de 26 a 30v amperagem pode chegar a mais de 10 amperes)
Thanks for the info It will probably be split into 4.
Good job! :)
Thank you mate , it's coming along well.
Awesome, what kind of power fo you expect from this monster?
Gotta be hoping for a KW when its done.
Mate back off your wire speed about ten it should smooth out no disrespect intended
how many turn coil for 1 tooth ?
Each finger of the stator has approx 80 turns of .8mm wire or approx 100 turns for the .6mm wire.