Repair of a turbine dental handpiece KAVO 636

Repairing a KAVO 636 turbine dental handpiece can seem like a daunting task, but with the right tools and guidance, it is something that can be done at home. Here are the steps to follow:
Step 1: Remove the turbine from the handpiece. To do this, use a handpiece wrench to loosen and remove the locking ring, and then slide the turbine out of the handpiece.
Step 2: Disassemble the turbine. To do this, use a turbine disassembly tool to remove the retaining ring, and then carefully remove the impeller, bearings, and o-rings.
Step 3: Clean all of the parts thoroughly using an ultrasonic cleaner or by hand using a cleaning solution and a brush. Make sure to remove any debris or buildup.
Step 4: Inspect all of the parts for damage or wear. Replace any damaged or worn parts.
Step 5: Reassemble the turbine. Begin by lubricating the bearings and o-rings. Then, carefully reassemble the impeller, bearings, and o-rings in the correct order. Use a turbine assembly tool to replace the retaining ring.
Step 6: Reinstall the turbine in the handpiece. Slide the turbine back into the handpiece, and then tighten the locking ring using a handpiece wrench.
Step 7: Test the handpiece to make sure it is working properly. If there are any issues, disassemble and reassemble the turbine again to check for any errors.
By following these steps, you can successfully repair your KAVO 636 turbine dental handpiece at home.
#repair #turbinehandpiece #KAVO636 #tools #dentistry #health #dentist #healthcare #maintenance #dentaltools

[@anba2904]

😂 "promosm"