Which is exactly why I stress to my fellow Simplex followers that you must always rotate on the iffy signals or even the iron grunts especially while digging for history.. I have just about annihilated my iron ridden permissions with my Simplex over the last 3 years or so..One epic dig after another.. I'd be really interested to see what the Simplex says if you were to rotate on those targets in your test..
So when notching out pull tabs it's a pretty level playing field on high and low detectors unless its an iron target. But I detect in all medal model and just listen to the tones on my X-Terra Pro. Would like to see a test in all medal mode with sepration tested (1 to 3)
The recovery speed will have very oittle effect on hitting targets in iron. If you are in iron you want a faster recovery speed. The XTP does not have a iron bias setting or an iron filter setting that high end SMF detector have, the filter settings will unmask targets from under iron. High end detectors will walk circles around the XTP in the iron.
I like using smaller coils because they are easier to pinpoint targets and small coils are lighter. I am not trying to hit 10" deep targets. Jewelry is near the surface!
Hi! Gold Grab 87 Fast program (4) Discrim 10? Full tones? Offset FT 11? Silencer 0? Iron volu. 10? Reactiviti 1,5? Audio res. 5? Audio typ PWM? Audio fil 5?
Jeremy does this test perform the same at heavy minerilized soil with deus2? or we shall use all metal on heavy mineralized soil? i ask only for deus2. Thanx for nice video.
The Deus 2 is very loud with low disc. Wet mineralized soil must be tamed by discrimination ....not notching. General program seems to do very well in wet soil,
I understand this is a nokta video... But do a video on x terra pro tone break explain how it works .. I am trying to figure it out but have no clue . I am thinking u may be able to explain to me on a video about the tone break on x terra pro
@@PaystreakSuperfreak doesn’t go deeper and have clearer signals ? I have a simplex+ and I’m wanting to make a slight upgrade without spending the money on a equinox 800
Which is exactly why I stress to my fellow Simplex followers that you must always rotate on the iffy signals or even the iron grunts especially while digging for history.. I have just about annihilated my iron ridden permissions with my Simplex over the last 3 years or so..One epic dig after another.. I'd be really interested to see what the Simplex says if you were to rotate on those targets in your test..
Another excellent demonstration💪🏻
Excelente, amigo, saludos cordiales desde chile 🇨🇱🙋♂️👏⛏️🗝️💍👍
So when notching out pull tabs it's a pretty level playing field on high and low detectors unless its an iron target. But I detect in all medal model and just listen to the tones on my X-Terra Pro. Would like to see a test in all medal mode with sepration tested (1 to 3)
The recovery speed will have very oittle effect on hitting targets in iron. If you are in iron you want a faster recovery speed. The XTP does not have a iron bias setting or an iron filter setting that high end SMF detector have, the filter settings will unmask targets from under iron. High end detectors will walk circles around the XTP in the iron.
Great video. Is that the 9 " coil on the xpD2
Yes, it is
Hi! Question from the noob :) Why you are using ellipse coil instead of stock round coil on Simplex Ultra? It has better performance/depth? Thank you!
I like using smaller coils because they are easier to pinpoint targets and small coils are lighter. I am not trying to hit 10" deep targets. Jewelry is near the surface!
@@PaystreakSuperfreak Thanks a lot!
Hi!
Gold
Grab 87
Fast program (4)
Discrim 10?
Full tones?
Offset FT 11?
Silencer 0?
Iron volu. 10?
Reactiviti 1,5?
Audio res. 5?
Audio typ PWM?
Audio fil 5?
Jeremy does this test perform the same at heavy minerilized soil with deus2? or we shall use all metal on heavy mineralized soil? i ask only for deus2. Thanx for nice video.
The Deus 2 is very loud with low disc. Wet mineralized soil must be tamed by discrimination ....not notching. General program seems to do very well in wet soil,
I understand this is a nokta video... But do a video on x terra pro tone break explain how it works .. I am trying to figure it out but have no clue . I am thinking u may be able to explain to me on a video about the tone break on x terra pro
I a m confused as to how many inches the detector is above the target as we all know that it does make a big difference in the sound of the machine
Eu tenho um legend com a bobina lg28, se eu comprar uma lg24, será melhor pra desmascarar o ferro?
Yes!!
Will a legend unmask the ring like the Deus 2 did?
No!! Legend performs a little bit better than the Ultra. Nothing comes close to the Deus 2 at unmasking
D2 all the way
True
like the guy below, you kept the nail in the same position
You are comparing a detector for 320 e with a detector for 881 e.
Дякую! КОРИСНО)
Is the simplex ultra an upgrade from the simplex+?
Yes.
@@PaystreakSuperfreak doesn’t go deeper and have clearer signals ? I have a simplex+ and I’m wanting to make a slight upgrade without spending the money on a equinox 800
@@PaystreakSuperfreak I have one on the way ! I got the one with the starter kit coming with the pin pointer !!
@@yaaarightt4127same!!
Ayarlarda bir sıkıntın var dostum yoksa simplex ultra böyle bir hata yapmaz😉😅
Watch a few English history revisited you tube videos you might learn something about the detector or read the manual 😂
This detector is so simple...no need to read the manual. Best way to learn is to take it out and find metal!!!!
@@PaystreakSuperfreak I own a simplex and it is very important to set it up. after setting up, it got a lot more power.
Lets think...when I've seen coin mix with bolts last time....hmmm NEVER🤣🤣🤣🤣🤣
You probably don't detect enough to encounter these situations. I find coins and jewelry with junk and iron all the time in my videos.
Or maybe you are not thinking hard enough!!