Hello, I am a beginner in DIY CNC. Every time I cut, the machine will run out of the path I want to go after a while. Can you analyze the reason? I use GRBL, FUSION 360, thank you
great video I made this machine with grbl cnc with cnc shieldv3 (a4988 stepper motor driver) but it is not working, grbl controller 3.6.1 show that (undefined feed rate) so please tell me how to fix it. thank you.
Hlo sir please help me. On uploading gcode file on gctrl it run but at last it shows command not recognise m18 drive off.sir how to solve this plz reply me.
I built a axi draw cnc plotter but when I send gcode to the machine it draws it at a 45 degree angle. Any ideas on the issue or troubleshooting would be appreciated.
these codes didnt for ARDUINO IDE AND FOR GCODE he didn't show each and every process properly just shorcuts in the video only errors only errors waste of time
Hello sir I'm facing problem in my CNC project "When I open gctrl using processing and click on play button some error message appears "JOptionPane is not applicable" Please guide me
Hello, I am a beginner in DIY CNC. Every time I cut, the machine will run out of the path I want to go after a while. Can you analyze the reason?
I use GRBL, FUSION 360, thank you
Nice, very few people I know etch their channel intros this way...
great video
I made this machine with grbl cnc with cnc shieldv3 (a4988 stepper motor driver)
but it is not working, grbl controller 3.6.1 show that (undefined feed rate)
so please tell me how to fix it. thank you.
I have a problem
With pen holder
Kya aap ek video bana sakte he ki aapne apna holder kese banaya
🙏🙏🙏
sir my arduino cnc not working it is not drowing properly and g code also not run please help me
Bro my servo is not working many times I replace the motor and do proper connection but does not work the servo.
I have same problem but nobody reply to solve my problem.
My also sometimes it works and sometimes not
Sir All is parfact but servo motor not working I use l293d cnc shield pls help me pls pls pls sir
Excellent
Hey nice video, what if servo does not works?
Useful video
Servo motor not moved in z axis please help me
How to make drawing gcode from image for cnc router for using pen instead of motro spindle
Hlo sir please help me. On uploading gcode file on gctrl it run but at last it shows command not recognise m18 drive off.sir how to solve this plz reply me.
I built a axi draw cnc plotter but when I send gcode to the machine it draws it at a 45 degree angle. Any ideas on the issue or troubleshooting would be appreciated.
same issue
Same issue
When Gctrl opening with processing software, error on running .. @3.22 how to correct the code ? Please reply
Using V1.1 Grbl arduino mega 2560 3.6.1 grbl controller and it always gives error 22 :(
Hey what about part 5 internal combustion engine. It's a long time passed bro and still waiting.
Super video
i am from portugal can you helpe me
to finish my cnc mini ploter
servo not working. inkscape fails to upload
Nice
these codes didnt for ARDUINO IDE AND FOR GCODE he didn't show each and every process properly just shorcuts in the video only errors only errors waste of time
G4 error. Are you solution ?
Hello sir
I'm facing problem in my CNC project
"When I open gctrl using processing and click on play button some error message appears "JOptionPane is not applicable"
Please guide me
What software are you using For G Code
Im using inkscape for gcode
For G-code sender?
Using gctrl processing 3.4
Send me sms on facebook
Upload part 5 bro
man can u help me plz
:)
Sir aapke number mil sakte hai kiya