thank you for your very interesting video. I've weld many stainless steel tubes 2mm thick with , and I often do holes when welding 1mm thick plates. I do like the demonstration with the 3 diameters sticks for all the differents welds.
Buddy the problem with thick rod is that the amount of Amps needed it to melt, when it reaches upto that state the temperature is already too high for sheet metal and that cause the holes. It's doable but it's not going to be a fusable weld.
Great Video! Great instruction. Thanks! I need to weld on my Stainless table where some welds broke and have been terrified of messing it up. You have encouraged me to give it a try. I will let you know how it comes out.
Amazing, innovative work. Stick can do TIG type work. Exactly what I'm trying to do, 1 mm ss welding into containers. Stick is underrated for this type of work with many using TIG if at all possible.
No dear, it didn't have a hot start feature and I don't think you really need that, it will surely going to make holes in the sheet of this thin size. Hot start gives you a more penetration and we did not required here because what ever tack you are going to make they penetrate easily.
Thank you for this helpful video. I bookmarked it long before I purchased a welder and now I hope to use your tips for a challenging project. I need to weld (expensive) 316 stainless steel handrail fittings to a 25mm railing of 1.5mm thick, to make a roof support, and polish it afterwards. Getting rod sizes and Amps correct really matters. The result of the pickling agent looks great but unfortunately, in my country it can only be purchased by certified professionals because it’s so hazardous. I will need to grind.
Great video, sir! I'm no welder, just trying to figure out what kind of gear I might need, and would need to do 'light' stainless welding, so this is most informative... do you have a video on welding SS 'wire'??
Thanks for the video! Your reasoning is quite appealing and you have received good comments from the heavy weights! I have some projects in mind and tig welding equipment would cost me dearly.
first these are thick , not thin , thin is below 0.5 mm and even if you manage to weld it without holes it get caved in and badly warped , you need to get a mig welder , mig use 0.8 wire so easy to melt compare to that stick
One of the best channel in youtube Brother small request iam starting grill work but many confusion not available scoch bite wheel ,flap whell,& bron ,white, green,any colour follish soap & pickling agent not available please give me some links online or offline where available this metirial help me brother,& one bench vise wanted with better tell me brother.🙏
Thanks Suresh, These are basic things and available every where. You can get online on amazon or IndiaMART. Lots of authorised dealer available in delhi, mumbai, Bangalore.
I used to have certification for MIG welding thin sheet stainless steel. We used to have to weld panels together with no burn- through, only discoloration that would then be cleaned with the acid. I don't think I ever even TRIED to weld any thin sheet stainless with a stick. Stainless is so touchy, I will warp just looking at it. You don't need to weld it. Just heat it with a torch it will assume a whole new shape.
Preffer brazing rather than welding, stick welding damage the tank, or you go with tig welder. You can fill the small pin holes with stick welding with 2.4 mm rod at 60 amps but be careful, it's a bit more difficult.
How do I weld 22gauge stainless steel sheet. I tried the direct arc to the metal method, but the sheet just melted. Then i used extra steel wire to weld it. It worked but its time consuming plus the finish is not fine
Thanks mate. If you provide an aluminium backing as heat sink you can safely weld 20 gauge thick sheet but rather than performing the full weld go with stich weld to avoid heat deformation.
Want to let you know that using Solar flux which is a metal holding flux on both sides of the sheet metal will really make welding a breeze. Just saying fella. Nice and honest welding.
@@ambroscustom You will be amazed how great this stuff works. This was actually a top secret material during WW2. Back then they only had oxy acetylene gas. The old timers called this a holding flux. Good luck fella too.
It's DCEP dear, untill you have right electrode, it won't be any issue to weld sheet metal with right amps. Thinner electrodes are much safer in welding but required fast action.
Just one question please! Some welders use a shorter lengths of thin, say 1.6mm stick to minimise bouncing, but is it okay to cut an electrode down to size?
Yeah buddy its ok to cut. Or you can also remove little bit flux from centre and hold from right in the middle, in this way you can use half from both sides. If find it difficult then no big problem in cutting but it's always good to practice with bigger one, that also minimise the wastage.
Hi AMbros Custom, i would like to do a repair job on the stainless steel bowsprit of my boat. It is made out of 1 inch diameter tube. I was looking to see if i could get some advice on you tube and came across your channel. Your video was really helpful, but i just wanted to ask, will welding the tube be the same as the flat pieces you demonstrated, that is ,can i use the spot welding method with 2 mm rod, or do i have to do a complete pass.I have a small a.c. welder. Many thanks, Oz.
Buddy, there is a video on my channel in which I weld on 2" pipe having a wall thickness of 1.5mm. the process is almost the same. That is definitely a doable task. Tried to make the joint as precise as possible and avoid any air gap between the joints because that's the main cause of blow holes. Tried to have thin electrode and kept the amps at 45-50. That is very good for 1-1.5mm metal and also provide better fusion. Don't make a complete run in one go. Stich welding is the only way you can do it. This video might help you little bit to boost your confidence. Good luck. ruclips.net/video/n7qxpbQa4GU/видео.html
So you can tack 1mm stainless with a 2,5mm electrode If you are fast and don´t pull lines ? Thanks I will try it with your 45A. I need that for holding before I do hard soldering.
Yes dear you can, also using some sort of aluminium block along the weld lines also helps. If feels difficult to do then try changing the polarity will definitely help, electrode to negative and ground to positive. Good luck:)
The cube is a cross did'nt know that. Very nice habilety. Does brand of rod make a difference. I tried to solder 2 spoons as practice , low amp rod sticks high amp spoons melt ! E 6013 3.2mm ...any advice is welcome. I use $99 inverter from the web
Well buddy the trick is that to weld thin sheets it's absolutely mandatory to use thinner electrode. 3.2 mm is considered to be thick. I use 2.4 mm for 1.5 mm thick material.Never tried 3.2 mm for these thin materials. So go for thin and go low for thin sheets.
Thanks brother, onto the bottle there is nothing written about the contents, but you can search about stainless steel pickling agent or pickling paste. This is specially available for removing black oxides from stainless.
Buddy if you able to find 1/16" it's good other wise for 2 mm 5/64" is the size in fraction. 3/32" is a bit thicker for 18 gauge sheet so don't go with that.
Well buddy in my country brand name esab and Hobart sell these electrodes. I didn't knew any other brand but if you search them in your area you will definitely find someone. Good luck:)
Dear for stainless-steel machine really didn't matter at all. All you need is right settings and correct size electrode and good timing. If you have all of these things than you can easily do welding.
I dont have any experience on welder bt I have welding machine soni use to learn from RUclips so from this I get some idea thank u I will continue to follow ur channel
Well dear you can consider those shapes to be in floating position. If things worked well with the actual product then float welding demonstration should definitely work.
+91 98106 54634 bro meine Delhi se purchase ki thi electrode. Ye number dealer ka hai, isi se purchase ki thi via India Mart.. 1.6 mm mat kharidna kaffi difficult hai kaam karna or costly bhi hai . 2 mm Vali sahi hai. Good luck.
Take some of that youtube money and get a tig machine. I need some help learning how to weld 316L without cooking the shit out of it! Doing this with stick is impressive, but not practical for larger projects.
Absolutely correct, I showed it for exceptional case, even I himself didn't recommend but incase you have no option this is what, as far as new tig I am saving for it to get better quality machine.
thank you for your very interesting video. I've weld many stainless steel tubes 2mm thick with , and I often do holes when welding 1mm thick plates. I do like the demonstration with the 3 diameters sticks for all the differents welds.
Buddy the problem with thick rod is that the amount of Amps needed it to melt, when it reaches upto that state the temperature is already too high for sheet metal and that cause the holes. It's doable but it's not going to be a fusable weld.
Great Video! Great instruction. Thanks! I need to weld on my Stainless table where some welds broke and have been terrified of messing it up. You have encouraged me to give it a try. I will let you know how it comes out.
Appreciate your words mate. Yeah it's surely doable task with stick welder.
I love to watch people whith minimal or even primitive tools and material. Not wasting anything. God you sir. Work safe.😃
great video mate, no messing about, straight to the point! subscribed
Amazing, innovative work. Stick can do TIG type work. Exactly what I'm trying to do, 1 mm ss welding into containers. Stick is underrated for this type of work with many using TIG if at all possible.
Learning a lot of techniques from your tutorials brother, keep doing your videos
Thank you so much Mr Sayful. You should visit my channel and checkout other stuff.
A wealth of information as always. Thank you.
Thanks William, really appreciate your feedback buddy:)
Great vids bro , and nice to see you explain in english 😁😁🤘🤘🤘🤘🤘🤘
Thanks Karl..
Thanks for the info. There are not to many people make informative videos.
Pleasure to hear that mate:)
this is best video on you tube how to do thin metal on stick, thanks
Pleasure to hear that mate🙏
Very good and useful vidio indeed. Like it so much. You mean the higher electrode need higher ampere
Awesome bro. Good instructions.
Excellent video. Very grateful for you taking the time to make this.
Thanks mate, appreciate your feedback:)
@@ambroscustom Hey.. quick question... does your welder have a 'hot start' ? Would this technique be possible with a welder that had hot start?
No dear, it didn't have a hot start feature and I don't think you really need that, it will surely going to make holes in the sheet of this thin size. Hot start gives you a more penetration and we did not required here because what ever tack you are going to make they penetrate easily.
@@ambroscustom Thanks again! very helpful
@@ambroscustom do you think it is possible to buy a good arc welder today that does not have 'hot start' ?
Thank you for this helpful video. I bookmarked it long before I purchased a welder and now I hope to use your tips for a challenging project. I need to weld (expensive) 316 stainless steel handrail fittings to a 25mm railing of 1.5mm thick, to make a roof support, and polish it afterwards. Getting rod sizes and Amps correct really matters.
The result of the pickling agent looks great but unfortunately, in my country it can only be purchased by certified professionals because it’s so hazardous. I will need to grind.
Glad you liked it mate. Good luck for your project.
Salute to your work.
I am struggeling with stick welding ø75x1mm pipe.. this video is very helpfull and good as mental support 😅
Nice to see you back.
Great video, sir! I'm no welder, just trying to figure out what kind of gear I might need, and would need to do 'light' stainless welding, so this is most informative... do you have a video on welding SS 'wire'??
Thank you my friend. I will build video for you.
Thank you - really, really helpful. Very much appreciated 👍 please keep up the great work!
Thankyou for the feedback brother, appreciate it:)
That was exactly what I was looking for. Thanks! Subbed
Glad to hear that buddy.
Nice work man, i really appreciate you for sharing your knowledge. Thanks from South India
Thanks brother 🙏
Thanks for the video!
Your reasoning is quite appealing and you have received good comments from the heavy weights!
I have some projects in mind and tig welding equipment would cost me dearly.
Really Appreciate your feedback.
Which electrodes and what settings would be correct for stainless steel cutlery ("flatware") projects?
Many thanks for your awesome vids.
first these are thick , not thin , thin is below 0.5 mm and even if you manage to weld it without holes it get caved in and badly warped , you need to get a mig welder , mig use 0.8 wire so easy to melt compare to that stick
One of the best channel in youtube
Brother small request iam starting grill work but many confusion not available scoch bite wheel ,flap whell,& bron ,white, green,any colour follish soap & pickling agent not available please give me some links online or offline where available this metirial help me brother,& one bench vise wanted with better tell me brother.🙏
Thanks Suresh, These are basic things and available every where. You can get online on amazon or IndiaMART. Lots of authorised dealer available in delhi, mumbai, Bangalore.
Thank you for this very detailed explanation, all the best
My pleasure:)
Awesome explanation
Thanks
I've been searching for video like this. Thank you brother, you're awesome!!!...subscribed.
Glad to hear that
great lesson cant wait to try it myself , but i need to practice a lot thanks
Pleasure to hear that mate:)
YOu sir, are a GOOD INSTRUCTOR. Thank you. SUBSCRIBED!
Thanks for your kind words:)
Finally... Very Useful video
Thanks dear:)
I used to have certification for MIG welding thin sheet stainless steel.
We used to have to weld panels together with no burn- through, only discoloration that would then be cleaned with the acid.
I don't think I ever even TRIED to weld any thin sheet stainless with a stick.
Stainless is so touchy, I will warp just looking at it. You don't need to weld it.
Just heat it with a torch it will assume a whole new shape.
Indeed, one of the non-cooperative metal to work with, if don't pay much attention then convert any professional job into abstract art.
Indeed, one of the non-cooperative metal to work with, if don't pay much attention then convert any professional job into abstract art.
Very helpful for me. I am expecting more videos
Bro i wanted to fill some welding on bike leak tank so which rod I have to use ????
Preffer brazing rather than welding, stick welding damage the tank, or you go with tig welder. You can fill the small pin holes with stick welding with 2.4 mm rod at 60 amps but be careful, it's a bit more difficult.
Really good video!!! Helped me a lot, thanks man! 👌
Thanks for the feedback:)
Very nice video thanks for sharing!!!
Thanks very much....super explanation
Well done bro...
too nice. thank you for sharing us this video ... big like for you
Thanks brother, appreciate your words
Good info ✨✅👍
How do I weld 22gauge stainless steel sheet. I tried the direct arc to the metal method, but the sheet just melted. Then i used extra steel wire to weld it. It worked but its time consuming plus the finish is not fine
so 2.0mm 5/64 is best? for thin?
Very good video
Thanks😇
Great video. And thank you.
Question, how thin can you go?
Thanks again😇
Thanks mate. If you provide an aluminium backing as heat sink you can safely weld 20 gauge thick sheet but rather than performing the full weld go with stich weld to avoid heat deformation.
Want to let you know that using Solar flux which is a metal holding flux on both sides of the sheet metal will really make welding a breeze. Just saying fella. Nice and honest welding.
Thanks mate. If I found that item near me I definitely give it a try.
@@ambroscustom You will be amazed how great this stuff works. This was actually a top secret material during WW2. Back then they only had oxy acetylene gas. The old timers called this a holding flux. Good luck fella too.
I like very good. Thank you
My pleasure buddy:)
thank you so much brother
very interesting. What is the amperage that you use?
Please tell me is it DCEP or DCEN ?
It's DCEP dear, untill you have right electrode, it won't be any issue to weld sheet metal with right amps. Thinner electrodes are much safer in welding but required fast action.
@@ambroscustom Thank you
Kick Ass Video !!! 👍
1 more question. Hope this isn't stupid. But could I use the small stick with a soldering torch?
Thanks again,😇
People often doing brazing on thin sheets( brass filler rod) but the out put result is not pretty. You can't use stainless rod for brazing.
Nice video, you earned a sub
ਸਬਤੋ ਵਧੀਆ ਵੀੜੀੳ, !
1mil stainless runs good with 2mil electrode @49A
Good video. Good job.👍👍👈
Glad to hear that 😁
Very good job
Thanks mate.
Just one question please!
Some welders use a shorter lengths of thin, say 1.6mm stick to minimise bouncing, but is it okay to cut an electrode down to size?
Yeah buddy its ok to cut. Or you can also remove little bit flux from centre and hold from right in the middle, in this way you can use half from both sides. If find it difficult then no big problem in cutting but it's always good to practice with bigger one, that also minimise the wastage.
Hi AMbros Custom, i would like to do a repair job on the stainless steel bowsprit of my boat. It is made out of 1 inch diameter tube. I was looking to see if i could get some advice on you tube and came across your channel. Your video was really helpful, but i just wanted to ask, will welding the tube be the same as the flat pieces you demonstrated, that is ,can i use the spot welding method with 2 mm rod, or do i have to do a complete pass.I have a small a.c. welder. Many thanks, Oz.
Buddy, there is a video on my channel in which I weld on 2" pipe having a wall thickness of 1.5mm. the process is almost the same. That is definitely a doable task. Tried to make the joint as precise as possible and avoid any air gap between the joints because that's the main cause of blow holes. Tried to have thin electrode and kept the amps at 45-50. That is very good for 1-1.5mm metal and also provide better fusion. Don't make a complete run in one go. Stich welding is the only way you can do it. This video might help you little bit to boost your confidence. Good luck.
ruclips.net/video/n7qxpbQa4GU/видео.html
Pickling agent??? What did you use? Product name or chemical composition.
You can search online for a stainless steel picking agent for more details.
So you can tack 1mm stainless with a 2,5mm electrode If you are fast and don´t pull lines ? Thanks I will try it with your 45A. I need that for holding before I do hard soldering.
Yes dear you can, also using some sort of aluminium block along the weld lines also helps. If feels difficult to do then try changing the polarity will definitely help, electrode to negative and ground to positive. Good luck:)
Thank you very much dear brother ! Keep your videos going they help a lot :)
Super
Hi thank you good job I have card sister rusty how to welding the car body metal sheet please make one video my request🙏🙏
Buddy the steps are almost identical. If the gauge is less than 18, then don't go with stick welder it's gona make holes which are difficult to fix.
The cube is a cross did'nt know that. Very nice habilety. Does brand of rod make a difference. I tried to solder 2 spoons as practice , low amp rod sticks high amp spoons melt ! E 6013 3.2mm ...any advice is welcome. I use $99 inverter from the web
Well buddy the trick is that to weld thin sheets it's absolutely mandatory to use thinner electrode. 3.2 mm is considered to be thick. I use 2.4 mm for 1.5 mm thick material.Never tried 3.2 mm for these thin materials. So go for thin and go low for thin sheets.
@@ambroscustom , good advices ...i was feeling dumb to not succeed ...go thin and success.Thanks.
im here to learn how to weld 0.8mm sheet with 1.6mm stick. So its 35Amp. Thank you nice guy
Thanks for the feedback.
Cool!!
good bro...👍🏻👍🏻👍🏻👍🏻
easy to understand...👍🏻👍🏻👍🏻
Thanks for the feedback
How thick were the sheets in millimeters please?
1.1 mm
Good information. Which pickling agent did you use?
Thanks brother, onto the bottle there is nothing written about the contents, but you can search about stainless steel pickling agent or pickling paste. This is specially available for removing black oxides from stainless.
@@ambroscustom ya... I will try to find. And your channel is very much helpful
How about .7 stainless steel plate..any advice sir
Changing the polarity will help. Connect electrode to negative and ground to positive.
what is the size in fraction of inches closest to the 2.0 mm i only see 1/16" 3/32", 1/8" 1/4" sizes what do you recommend for 18 g stainless
Buddy if you able to find 1/16" it's good other wise for 2 mm 5/64" is the size in fraction. 3/32" is a bit thicker for 18 gauge sheet so don't go with that.
@@ambroscustom thanks can you recommend where the buy the 5/ 64? i only found one can of arcos from 1993 on ebay.
Well buddy in my country brand name esab and Hobart sell these electrodes. I didn't knew any other brand but if you search them in your area you will definitely find someone. Good luck:)
Hi Sir! POLO MMA 300 Welding machine Can I Use for Steel!
Dear for stainless-steel machine really didn't matter at all. All you need is right settings and correct size electrode and good timing. If you have all of these things than you can easily do welding.
Thank u it helpful
Thanks brother glad to hear that.
I dont have any experience on welder bt I have welding machine soni use to learn from RUclips so from this I get some idea thank u I will continue to follow ur channel
With what do you clean the weld?
It's a pickling agent. It's specifically available for stainless steel work.
What chemical u use to clean welding line ?
It's called pickling agent, mostly used for stainless-steel to remove black oxide and burn marks.
Can you achieve this with oxy acetylene
I don't have oxy, but there are few people who does brazing on stainless steel pipes for bike frames. You should check them.
Sir were are you from i from Bhopal
Ludhiana, Punjab
For 1.6 and 2.0 what percentage amper
its clearly shown in the video.
When you are a welder and a dnd nerd XD
why dont try float welding not to put table
Well dear you can consider those shapes to be in floating position. If things worked well with the actual product then float welding demonstration should definitely work.
Sir muja steel ke welding sakna ha plz sir reply me
Kya seekhna chahte ho..
Link de dho bro MS electrode ka 1.6mm, 2mm ka
+91 98106 54634 bro meine Delhi se purchase ki thi electrode. Ye number dealer ka hai, isi se purchase ki thi via India Mart.. 1.6 mm mat kharidna kaffi difficult hai kaam karna or costly bhi hai . 2 mm Vali sahi hai. Good luck.
@@ambroscustom thanks bro, I really appreciate you put effort on it... 👍🥰🥰
दोस्त आप इंग्लिश में क्या बोल रहे हैं कुछ भी समझ नहीं आ रही प्लीज हिंदी में भी वीडियो बनाया करें और अपने भारत के वेल्डिंग कारीगरों की भी मदद करें
Take some of that youtube money and get a tig machine. I need some help learning how to weld 316L without cooking the shit out of it! Doing this with stick is impressive, but not practical for larger projects.
Absolutely correct, I showed it for exceptional case, even I himself didn't recommend but incase you have no option this is what, as far as new tig I am saving for it to get better quality machine.
@@ambroscustom Good! If you can stick this thin stuff, you'll be awesome with TIG! 👍
Facing blow holes problem😢
Use filler rod method, take a separate rod and place it over the joint and then ignite the arc.
Bed supar meking sar bed మెజర్మెంట్స్ చెప్పండి sar
वीडियो इंग्लिश में होने की वजह से समझ नहीं पाता हूं काफी दुख होता है मुझे इतनी अच्छी वीडियो मेरी समझ में ना आए
I strongly advise viwevers to wear welding googles to avoid damage to their eyes during the viewing of this video
Right.
Videos can't damage your eyes.
heavily edited video
Which glue you use for cleen welding?
It's not a glue, it's pickling agent. Just search pickling agent for stainless steel