Audi B7 2008 aftermarket amp and sub

Поделиться
HTML-код
  • Опубликовано: 29 окт 2024

Комментарии • 16

  • @alexboudnauth4046
    @alexboudnauth4046 4 года назад

    Big thanks man, the power cable was a pain in the ass I wasn’t seeing the cable underneath but when I took the dash it was fine. This video helped a lot

    • @marsruben
      @marsruben 4 года назад

      You had to remove the whole dash or just glovebox? I have removed my glovebox but cant seem to find the wire string im using to fish it out. Tried today for 4 hours and no luck..

    • @StaticVapour590
      @StaticVapour590 3 года назад

      @@marsruben You got it eventually?

    • @marsruben
      @marsruben 3 года назад

      @@StaticVapour590 Yes, done to two cars now, dont go with the cable from the outside, but from the inside poke through with a long screwdriver between the two black AC lines. there it goes directly through the firewall matt and through

    • @StaticVapour590
      @StaticVapour590 3 года назад

      @@marsruben Thanks. Figured that out like hour ago after trying to fish that damn cable through those small grommets right next to battery. Almost like there is something blocking the route on my car (Seat Exeo / reskinned A4 B7).. Planning to pull the wire from grommet after I get it pulled out via AC lines

  • @Glurbschnurb
    @Glurbschnurb 4 года назад +1

    Cheers man! I am on day unteen of my A3 8p nightmare. I just want to amp my front JBL components and keep the head unit and rear amp, but I can't get any signal, apart from a nice turbo whine.

  • @jayb8941
    @jayb8941 3 года назад +1

    Thanks 👍

  • @sebastianveile346
    @sebastianveile346 2 года назад

    Thanks ❤️

  • @joceromero
    @joceromero 3 года назад

    Thanks.. help.me a lot

  • @daltonflowers1564
    @daltonflowers1564 Год назад

    I have the same car same model trying to set up my subs how do I know which red and brown wire is positive or negative

  • @schorczy
    @schorczy 3 года назад

    So u take power down to the converter, and signal from the original woofercables aswell?

  • @flo2dfc
    @flo2dfc 4 года назад

    so without a hi-low adapter we can't bring rca plugs to an aftermarket amplifier from the original amplifier?

    • @Steelhorse-enthusiast
      @Steelhorse-enthusiast 4 года назад +1

      Depends on your amp I just got the vibe PowerBox 400.1 will support high and low level input this means you can attach it strait to the wire also with this amp if you tape into a high level line you don’t need to install the signal wire :)

    • @josephbarron8089
      @josephbarron8089 3 года назад

      @@Steelhorse-enthusiast I have a 2000 Amp bought does the same occur ?

  • @josephbarron8089
    @josephbarron8089 3 года назад

    Have you any drawing of this ? Do I need a hi lo converter ? I have a 2000 amp bought . The car I’m working on has a bose system any help would be appreciated

    • @Mandark4ever
      @Mandark4ever  3 года назад

      I know the bose system is different I never did any research on that system