Watched loads of RUclips vids to get my ESP32 cam to work, without getting anywhere, was very annoying because i thought it was me and i was going to give up. Found your video, followed it exactly, worked perfectly first time ! Thank you for making this and explaining in a way that made complete sense. Big thumbs up to you 👍👍👍
HI AHMED All RUclipsrs assure that this camera only works with devices that they suggest that you buy to use the camera and you are the only one who proved that we do not need to buy an additional device, so I subscribed to your channel today with my regards
You Sir are a Lifesaver... I´ve seen SO many videos to this from some teenagers without Audio, or with Audio but not explained exactly. Everyone just clicking arround and it works by them but it doesn´t by me... AFTER your video I understood finally what my problem was.... I didn´t set the Serial Number and was not able to see the IP Adress -.- But I could had just read my router and saw the IP Adress too... I just was not sure if it works or not because I just saw hyroglyphes like u did and no IP Adress, thought I destroyed it by flashing BUT it works fine and now I´m experienced to it xD TY so much man
I couldn’t have said it better myself, I’m so grateful for this tutorial. I’ve been searching for content exactly like this for a while now. I love this side of the internet.
I really appreciate your help, I was having difficulty getting camera to work. I followed your steps & finally it’s working. Thank you so much for sharing your knowledge and expertise with the world❤. You totally made my day🥰🥰🥰
Thank you for making this video. I also received to me the cameras this week and I didn't know how to mount them! (I ordered several pieces.) (I have a thief neighbor, who keeps stealing different things from my yard.) Thank you very much for enabling subtitles . I know a little English. I normally understand 50-60% of what you say (I infer the rest...). But like that ... I totally get it. Thank you for helping me get the purchased cameras up and running!!!
Thank you for making this super helpful video. Is it possible if you could make this same video but using Bluetooth and having the camera connected to an external battery source? It would be super helpful for a lot of people if you did.
great esp32 cam video. Also using the LILYGO T-CAN485 ESP32 Development Board CAN Modbus rtu RS485 IoT Engineer Control Module $23 and the free remoteXY cellphone Bluetooth app works great to display a 25,000 Lbs loadcell Modbus 30001. Next this cam video looks very interesting for the next esp32 project. 😎 thanks a lot.
Thanks! Thank you for making this super helpful video. Is it possible if you could make this same video but using Bluetooth and having the camera connected to an external battery source? It would be super helpful for a lot of people if you did. I am trying to find or make a camera module like this one to work as a wireless Bluetooth camera for the front of my car that I can connect to a screen/monitor using bluetooth.
To upload the program I had to put it into bootloaded mode first by holding IO0 on the MB board and pressing RST on camera board. Then I pressed RST again on the camera board again and it was working.
You are welcome. The best thank you for me is to subscribe to my channel. Your subscription is stamp of approval and my videos will be suggested to more people and this will help me. I appreciate it. thanks❤️
Hi, thanks for the explanation. I have a question: my esp32-cam-mb came with only the RST button. The IO0 button doesn´t exist. Is it a different version or anything is wrong ?
Hi, I got very with other stuff in life and haven't got a chance. By the end of November the pressure will be over and hopefully I get a chance to work on it. Thanks
Please make a video on internet clock with a scrolling message using Modemcu Esp wifi module & P10 LED display board duly giving source code connect diagram.
I get the error: E (10488) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND) Camera init failed with error 0x105E (494) esp_core_dump_f�f��� No core dump partition found! E (494) esp_core_dump_flash: No core dump partition found! E (2776) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND) Camera init failed with error 0x105
Hi, still did not understand. Are the LED lights turn on based on body shape from camera or it is shadow on the wall? if LED lights turn on based on camera image, then it would be very expensive to purchase all those LED light. Do able but I won't make it as it is not practical and will not help anyone with their actual project. and I am not sure if I make the video with full instruction, anyone would be interested to spend like $400 or more to make it. I am not fan of having fun. it must be useful and help people. not sure. if people will watch it to have fun. even if they did, will I get 1 million view in two months to make $400?
@@robojax thankyou . you r right . but about me i gonna make this project with gipest way i use styrofoam board with WS2812B LED Strip but my only problem is how to connect the camera to WS2812B LED Strip ... but any way i gonna build the led wall first and i show you the finish project when i am ready .
I let the commercials play 😁 cool video.will this work with the wroom version of module the one without the sd card or need for uart device it just plugs in usb thanks for any help.😁👍
Thank you so much for this quality of class education. Do you happen to know if there's possible to rotate the camera at my will maybe in 90 degree. I think the limited hardware make it impossible but there has to be a way to do it with JS/Css. But I don't know where to start. If you point me a given solution that you may have or know it would be great your thought about it. Thanks again for this.
You are welcome. The best thank you for me is to subscribe to my channel. Your subscription is stamp of approval and my videos will be suggested to more people and this will help me. I appreciate it. thanks❤️
I set everything up and plugged in the usb to the lower card and the diode next to the main IC ( left side) smoked ..... why?? and has anyone also had this happen?
Ahmed, thank you for this RUclips content. It is very useful. My ESP32 is working, but is crazy slow. It takes about 3 seconds to take a still picture, and videos are almost impossible (even at 240x240). Is there a way to boost the memory in the "Huge App" partition? It looks like it has 3MB for the app, but the board I bought on Amazon has 8MB. I bought: Aideepen ESP32-CAM W-BT Board ESP32-CAM-MB Micro USB to Serial Port CH-340G with OV2640 2MP Camera Module Dual Mode support NodeMCU.
Good morning I have an ESP32 CAM after writing all the program and what is necessary for the operation of the camera, the upload went well, when opening the serial monitor I press
Hi Ahmed, I'm having the same setup but I'm getting - Failed to connect to ESP32: Timed out waiting for packet header. Any idea how to solve that problem? Thank you.
I get this error when connecting after reset: E (497) esp_core_dump_flash: No core dump partition found! if using the esp32-cam-mb with the esp32-cam, do I need to set it in upload mode by shorting the gnd pin or not?
Great work! When I change the router (and therefore the WLAN-SSID), do I have to programm everything again? Or has the programm such settings (to do it via web interface before changing the router)?
Hi Great Video! have you any suggestions for getting this to work when my router changes the IP address? The camera is not easily reconnected to a serial output so i could read the new IP address.. could a MAC address or some other solution work?
Hi, there is MDNS you could use. Just look at File->Examples->WebServer->Advanced WebServer and you will see this line inside the setup if (MDNS.begin("esp32")) { Serial.println("MDNS responder started"); } you see in the code "esp32" and that is your URL to access the camera like esp32/ and even if the IP changes, you could access it. So try running that example. the example is found only if you install the ESP32 drivers. here is introduction to ESP32 ruclips.net/video/--Fj8QDlGuQ/видео.html
Hi, i did everything literally including all the step in the video, but im still geting error exit status 2, i use esp32 cam and esp32 cam base. i try to upload camerawebserver code to esp32 cam but exit status 2 pop up, is it hardware faulty?
I managed to install the ESP32 camera software myself. But now I want to ask how do I set the camera to record something and how can I see what is on the card without removing the card ? Can I see online what is on the card?
@@robojax Do you have a tutorial on this? Honestly, I'm wondering how I can see from my phone, what the camera has recorded or why not live images. For example, now I use a phone as a "surveillance camera", on which I installed the Alfred program (for Android) from the market. With one phone I record, and with the other, I see what the first phone recorded. How could I do the same with the ESP32 camera ? Can you teach me ? Thank you very much for uploading subtitles to this clip, because I don't know English very well !
Excuse me. I did all the same things like you did but the image wouldn't show up at all. Is there anyway to check the camera status before using this code?
very basic question which shows you did not watch the video. I made the video to answer such questions. The video has chapters and right at the begining of demonstarion I mentioned it.
hola, me encanta la forma en la que explican, muy entendible, aunque me ocurre un error a la hora de subir el código, me genera el error "A fatal error occurred: Failed to connect to ESP32: No serial data received." revise todo y parece estar bien, saben a que se puede deber? les agradezco si me pueden ayudar
@@robojax gracias por responder :) estuve leyendo mucho al respecto, descargue un par de drivers en otras paginas y ninguno funciono, solucione el problema con un convertidor USB a TTL cp2012, pero me desilusiono que no me funcionara el convertidor esp32-cam-mb, quizás si sea un problema del driver, revisare tu pagina con mas calma a ver que encuentro, por cierto muchas gracias :)
I just got this to make a doorbell camera. I followed the instructions, and my code would successfully upload but whenever I press the reset button on the camera board or the adapter, I’d not get anything in the serial monitor or if I unplug the camera and plug it back in, it would show random question marks that would go on forever. I am considering returning it. Any solutions?
Set the serial monitor baud rate the same as the code which I believe is 115200 . You may learn about serial monitor here ruclips.net/video/WyWRGoACWFs/видео.html
@@robojax I did that, and it is still doing that. It was always on the one you said, as I never changed it bc it was a default. I think there may be something wrong with the board as it’s not even trying to connect to wifi although the code is correct
hi sir what should i do? the IP address is not showing when I press the reset button it only says "rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2)) waiting for download" then that's it there's no IP address showing
Dear RJ, I am getting the Picture settings with out advanced settings part , that is from above of stream button. How to get the full settings such as save button on picture and other advance settings. my ESP 32 version is 2.0.5 on board manger. Thanks
Hello! What am I doing wrong when I run the Led code or the Using Micro SD Card code then the esp 32 camera stops working...?How to do it in parallel so that everything works?
When I connect my ESP32-cam to an usb power supply I need to push RESET button to start it properly. There is a way to run the module without pushing RESET (i.e. autostart due a power off issue)?
Hye...urgent question here!! Why i cannot find the link? In serial monitor when i rst it shows "no core dump partition found" and " camare probe failed with error" how can i solve this problem? Can u help me with this?
There could be wrong setting in arduino IDE or changes in the code. For the IP address check the SSID of your wifi. It is case sensitive. Book is not the same as book for SSID
if you need time like or hours then you need Real-Time-Clock or RTC that has alarm. here is full video on RTC ruclips.net/video/gz9xqvRroDY/видео.html but you can use the alarm feature of it.
Watched loads of RUclips vids to get my ESP32 cam to work, without getting anywhere, was very annoying because i thought it was me and i was going to give up. Found your video, followed it exactly, worked perfectly first time ! Thank you for making this and explaining in a way that made complete sense. Big thumbs up to you 👍👍👍
Glad it helped
HI AHMED All RUclipsrs assure that this camera only works with devices that they suggest that you buy to use the camera and you are the only one who proved that we do not need to buy an additional device, so I subscribed to your channel today with my regards
Thank you for posting this. I had my camera up and running quickly thanks to your efforts. Awesome!
Glad it helped!
You Sir are a Lifesaver... I´ve seen SO many videos to this from some teenagers without Audio, or with Audio but not explained exactly. Everyone just clicking arround and it works by them but it doesn´t by me... AFTER your video I understood finally what my problem was.... I didn´t set the Serial Number and was not able to see the IP Adress -.- But I could had just read my router and saw the IP Adress too... I just was not sure if it works or not because I just saw hyroglyphes like u did and no IP Adress, thought I destroyed it by flashing BUT it works fine and now I´m experienced to it xD TY so much man
I couldn’t have said it better myself, I’m so grateful for this tutorial. I’ve been searching for content exactly like this for a while now. I love this side of the internet.
I must say following these instructions FINALLY i can get the camera to work as per. thank you so much for the straight forward instructions, subbed
I really appreciate your help, I was having difficulty getting camera to work. I followed your steps & finally it’s working. Thank you so much for sharing your knowledge and expertise with the world❤. You totally made my day🥰🥰🥰
Thank you for making this video.
I also received to me the cameras this week and I didn't know how to mount them! (I ordered several pieces.)
(I have a thief neighbor, who keeps stealing different things from my yard.)
Thank you very much for enabling subtitles .
I know a little English. I normally understand 50-60% of what you say (I infer the rest...). But like that ... I totally get it.
Thank you for helping me get the purchased cameras up and running!!!
Sir you are a life saver to all the students who wish to learn hands on experience with audrino ! Great job and God bless!
You are most welcome. I am pleased you found it helpful. God bless you too
Thanks RJ. Excellent explanations on all the finer points that a beginner might not be aware of.
dam i hope my teacher in university teaching me like this, so detail and easy learning god bless you sir
Thank you for your time and effort. Great to see your face on this video.
Very well explained Ahmed, thank you so much!
By the way, do you know if this could also be turned into a BlueTooth camera instead of a WiFi one?
great video now my camera works perfect
This video is so helpful. Thanks for making quality content.
Tnx sir. I just started using the ESP32 CAM. Tnx for the info provided.
Very good explanation thank you sirji
Most welcome
your the best...today👍👍tommorow somebody else for me the best
Your instruction worked very well for me.
Congrats, that is a good video.
I subscribed to the channel. 🙂
Thank you for making this super helpful video. Is it possible if you could make this same video but using Bluetooth and having the camera connected to an external battery source?
It would be super helpful for a lot of people if you did.
Thanks for video 😀
My pleasure 😊
great esp32 cam video. Also using the LILYGO T-CAN485 ESP32 Development Board CAN Modbus rtu RS485 IoT Engineer Control Module $23 and the free remoteXY cellphone Bluetooth app works great to display a 25,000 Lbs loadcell Modbus 30001. Next this cam video looks very interesting for the next esp32 project. 😎 thanks a lot.
Thanks it worked perfectly. Just got it done
Great video, love the step by step not assuming anything :)
Thank you for this video! I'm doing some experimentation and your instructions made the setup part much easier.
Excellent!
Cool! I've used ESP CAM, but your explanation turns me for a question, Why didn't I use the microSD... Thanks!
"Good morning Ahmad", thx for the upload.
edit: whaaat? you are my neighbour. am in osh
Good morning, welcome. Yes we are Neighborh. I am from Ajax.
Appreciate your explanation
Thanks!
Thank you for making this super helpful video. Is it possible if you could make this same video but using Bluetooth and having the camera connected to an external battery source?
It would be super helpful for a lot of people if you did. I am trying to find or make a camera module like this one to work as a wireless Bluetooth camera for the front of my car that I can connect to a screen/monitor using bluetooth.
To upload the program I had to put it into bootloaded mode first by holding IO0 on the MB board and pressing RST on camera board. Then I pressed RST again on the camera board again and it was working.
If plugging in an external antenna - you need to MOVE the link and solder the link closest to l the plug.
thanks for this it is really helpful! However I am getting coloured lines on my video feed, any ideas how to resolve this?
Great video thank you for all details
You are welcome. The best thank you for me is to subscribe to my channel. Your subscription is stamp of approval and my videos will be suggested to more people and this will help me. I appreciate it. thanks❤️
Thanks you!
Subbed. This is great info.
Thanks for the sub!
awesome video mate. thanks
No problem 👍
Thanks for the excellent video, really well explained. Could yo show how to do this using esp-idf extension for visaul studio code too?
Great explanation !
Bedankt
Alstublieft. Bedankt
Great video!
Hi, thanks for the explanation. I have a question: my esp32-cam-mb came with only the RST button. The IO0 button doesn´t exist. Is it a different version or anything is wrong ?
Great introduction to this ..
Did you ever get to a solution with the face recognition problem ?
Hi, I got very with other stuff in life and haven't got a chance. By the end of November the pressure will be over and hopefully I get a chance to work on it. Thanks
Please make a video on internet clock with a scrolling message using Modemcu Esp wifi module & P10 LED display board duly giving source code connect diagram.
I get the error:
E (10488) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND)
Camera init failed with error 0x105E (494) esp_core_dump_f�f��� No core dump partition found!
E (494) esp_core_dump_flash: No core dump partition found!
E (2776) camera: Camera probe failed with error 0x105(ESP_ERR_NOT_FOUND)
Camera init failed with error 0x105
try use Arduino IDE 1.8
hi ahmed how i connect to led if i want to use camera led wall
What is LED wall?
@@robojax yes mr ahmed led wall is this ruclips.net/video/ikhZ34WgObc/видео.html&ab_channel=bitluni
Hi, still did not understand. Are the LED lights turn on based on body shape from camera or it is shadow on the wall? if LED lights turn on based on camera image, then it would be very expensive to purchase all those LED light. Do able but I won't make it as it is not practical and will not help anyone with their actual project. and I am not sure if I make the video with full instruction, anyone would be interested to spend like $400 or more to make it. I am not fan of having fun. it must be useful and help people. not sure. if people will watch it to have fun. even if they did, will I get 1 million view in two months to make $400?
@@robojax thankyou . you r right . but about me i gonna make this project with gipest way i use styrofoam board with WS2812B LED Strip but my only problem is how to connect the camera to WS2812B LED Strip ... but any way i gonna build the led wall first and i show you the finish project when i am ready .
I let the commercials play 😁 cool video.will this work with the wroom version of module the one without the sd card or need for uart device it just plugs in usb thanks for any help.😁👍
Thank you so much for this quality of class education. Do you happen to know if there's possible to rotate the camera at my will maybe in 90 degree. I think the limited hardware make it impossible but there has to be a way to do it with JS/Css. But I don't know where to start. If you point me a given solution that you may have or know it would be great your thought about it. Thanks again for this.
Hi, I believe I have shown the settings screen.
@@robojax yes, the default option, but I am looking for a way to rotate 360 in 90 angles like any image viewer. Thanks.
Thanks for this.
My pleasure!
Thanks
Thank you good video
You are welcome. The best thank you for me is to subscribe to my channel. Your subscription is stamp of approval and my videos will be suggested to more people and this will help me. I appreciate it. thanks❤️
thanks
I set everything up and plugged in the usb to the lower card and the diode next to the main IC ( left side) smoked ..... why?? and has anyone also had this happen?
Ahmed, thank you for this RUclips content. It is very useful. My ESP32 is working, but is crazy slow. It takes about 3 seconds to take a still picture, and videos are almost impossible (even at 240x240). Is there a way to boost the memory in the "Huge App" partition? It looks like it has 3MB for the app, but the board I bought on Amazon has 8MB. I bought: Aideepen ESP32-CAM W-BT Board ESP32-CAM-MB Micro USB to Serial Port CH-340G with OV2640 2MP Camera Module Dual Mode support NodeMCU.
By "impossible" for the video, I mean about one frame every 3 or 4 seconds.
Compilation error: 'ledcSetup' was not declared in this scope; did you mean 'ledc_stop'?
Good morning
I have an ESP32 CAM after writing all the program and what is necessary for the operation of the camera, the upload went well, when opening the serial monitor I press
Hi Ahmed,
I'm having the same setup but I'm getting - Failed to connect to ESP32: Timed out waiting for packet header.
Any idea how to solve that problem?
Thank you.
I get this error when connecting after reset: E (497) esp_core_dump_flash: No core dump partition found!
if using the esp32-cam-mb with the esp32-cam, do I need to set it in upload mode by shorting the gnd pin or not?
I'm having the same problem. Did you manage to get it working?
@@CBCNamja Not yet. But I will try doing it without the mb.
Thanks Bro!!
No problem!
Great work!
When I change the router (and therefore the WLAN-SSID), do I have to programm everything again? Or has the programm such settings (to do it via web interface before changing the router)?
Hello, unfortunately yes. you gotta change the password in the code, click on "upload" and then restart.
Thank you so much! One question, can you change the Wifi name and password? like in the arduino sketch
Hi Great Video! have you any suggestions for getting this to work when my router changes the IP address? The camera is not easily reconnected to a serial output so i could read the new IP address.. could a MAC address or some other solution work?
Hi,
there is MDNS you could use. Just look at File->Examples->WebServer->Advanced WebServer and you will see this line inside the setup
if (MDNS.begin("esp32")) {
Serial.println("MDNS responder started");
}
you see in the code "esp32" and that is your URL to access the camera like esp32/ and even if the IP changes, you could access it. So try running that example. the example is found only if you install the ESP32 drivers. here is introduction to ESP32 ruclips.net/video/--Fj8QDlGuQ/видео.html
Hi, i did everything literally including all the step in the video, but im still geting error exit status 2, i use esp32 cam and esp32 cam base. i try to upload camerawebserver code to esp32 cam but exit status 2 pop up, is it hardware faulty?
how to connect and program to raspberry pi 5?
Nice 👍
sir, can i use ESP32 CAM as a qr scanner?
hellos, im getting a bad image with lines not very clear is it something i can do or bad product?
Hola, me gustaría saber si hay manera de ver el streaming si estoy conectado a otra red wifi diferente.
exit status 1
Error compiling for board AI Thinker ESP32-CAM.
how to solve problem plz
After pushing Rst button ntg is showing only small boxes are getting displayed
Instead of wifi how to use wire connection for display on mobile or monitor for faster
this is WiFi module.
Hi Working this project to ESP32-CAM with ESP32-CAM-MB???
can upgrade modul camera?
yes. you can.
Can I able to see live video different wifi through mobile?
I have answered this in the video,.
How to use the gpio 16 of the esp32 camera as output, if it is used in the PSRAM?
Here is introduction to esp32 ruclips.net/video/--Fj8QDlGuQ/видео.htmlsi=bj54WUIRf1mN-Sta
Do we need battery. Or will work only on usb
via USB. but you can use this module to power via 18650 ruclips.net/video/LH0sXCrBV5c/видео.html
How save the loop video on sd card??
I managed to install the ESP32 camera software myself.
But now I want to ask how do I set the camera to record something and how can I see what is on the card without removing the card ?
Can I see online what is on the card?
it is possible to display the image for sure, but we need interface. like buttons to click and go back and forward. that needs a little work.
@@robojax Do you have a tutorial on this?
Honestly, I'm wondering how I can see from my phone, what the camera has recorded or why not live images.
For example, now I use a phone as a "surveillance camera", on which I installed the Alfred program (for Android) from the market. With one phone I record, and with the other, I see what the first phone recorded.
How could I do the same with the ESP32 camera ?
Can you teach me ?
Thank you very much for uploading subtitles to this clip, because I don't know English very well !
Hi.I want the photos taken using the Esp32cam camera module with the button to be sent to Telegram. How can I do that?
How much distance cover this module
it is WiFi and you must know by now how far you can take your laptop or mobile phone from your wifi router.
Hola. Quiero saber cual es el modo de GRABACION ,si detecta movimientos de personas y cual es la duración de la grabación ?
Hola, no pude encontrar solución para esto, pero estad atentos. Yo en cuanto lo encuentre subo el video.
@@robojax Gracias por su atencion !
Excuse me. I did all the same things like you did but the image wouldn't show up at all.
Is there anyway to check the camera status before using this code?
check the connection make sure connector is tight and holding the wire
Hello "E (496) esp_core_dump_flash: core dump partition not found! " İt gives an error, how can ı fix it? Thank you
Sir can I used from any where or from same place
very basic question which shows you did not watch the video. I made the video to answer such questions. The video has chapters and right at the begining of demonstarion I mentioned it.
How to earse or blank this board so that we can reprogram this for new project?
Just open your new program and upload . As sim sole as that.
@@robojax ok i try but when we need to use python ?
hola, me encanta la forma en la que explican, muy entendible, aunque me ocurre un error a la hora de subir el código, me genera el error "A fatal error occurred: Failed to connect to ESP32: No serial data received." revise todo y parece estar bien, saben a que se puede deber? les agradezco si me pueden ayudar
Make sure you see the USB port available. If you have usb driver issue then, please search my channel for the word “driver”
@@robojax gracias por responder :) estuve leyendo mucho al respecto, descargue un par de drivers en otras paginas y ninguno funciono, solucione el problema con un convertidor USB a TTL cp2012, pero me desilusiono que no me funcionara el convertidor esp32-cam-mb, quizás si sea un problema del driver, revisare tu pagina con mas calma a ver que encuentro, por cierto muchas gracias :)
i just have 1 question where do you get the code
when you don't watch, you miss it. I have shown it.
my man the led is always on and the board is not loading, what do u think ! !!
same problem here :c, driving me crazy
I just got this to make a doorbell camera. I followed the instructions, and my code would successfully upload but whenever I press the reset button on the camera board or the adapter, I’d not get anything in the serial monitor or if I unplug the camera and plug it back in, it would show random question marks that would go on forever. I am considering returning it. Any solutions?
Set the serial monitor baud rate the same as the code which I believe is 115200 . You may learn about serial monitor here ruclips.net/video/WyWRGoACWFs/видео.html
@@robojax I did that, and it is still doing that. It was always on the one you said, as I never changed it bc it was a default. I think there may be something wrong with the board as it’s not even trying to connect to wifi although the code is correct
No core dump partition found....what should i do???
me too
change baud rate to 115k
It means it cant put the code in due to some issues
1. No sd card
2. The IO0 and GND isnt connected when u upload
3. Usb cable isnt for file transfer
hi sir what should i do? the IP address is not showing when I press the reset button it only says "rst:0x1 (POWERON_RESET),boot:0x3 (DOWNLOAD_BOOT(UART0/UART1/SDIO_REI_REO_V2))
waiting for download" then that's it there's no IP address showing
is we can use nodemcu to power and program to esp32 cam
Search my channel for camera and you see how to use external usb to program
👍👍👍
Getting "fd_forward" "not found in the directory".....what to do?
Dear RJ, I am getting the Picture settings with out advanced settings part , that is from above of stream button. How to get the full settings such as save button on picture and other advance settings.
my ESP 32 version is 2.0.5 on board manger. Thanks
Hi, that might need another video as I was exploring more options. Once I get enough tips and tricks, I will make new video.
does the camerawebserver script require an SD card in the esp inorder to work?
no. I showed that you simply use it. Later in the video I demonstrated it so if someone need it, they should be able to use it.
Hello! What am I doing wrong when I run the Led code or the Using Micro SD Card code then the esp 32 camera stops working...?How to do it in parallel so that everything works?
Share your code here codeshare.io/ and pst the URL of your code back here. I will look at it.
When I connect my ESP32-cam to an usb power supply I need to push RESET button to start it properly. There is a way to run the module without pushing RESET (i.e. autostart due a power off issue)?
ruclips.net/video/--Fj8QDlGuQ/видео.html esp32 explained here
Hye...urgent question here!!
Why i cannot find the link?
In serial monitor when i rst it shows "no core dump partition found" and " camare probe failed with error" how can i solve this problem? Can u help me with this?
There could be wrong setting in arduino IDE or changes in the code.
For the IP address check the SSID of your wifi. It is case sensitive. Book is not the same as book for SSID
sir can we use the esp32 wirelessly from the arduino ide or the laptop?
?
what did I do then?
I mean can i unplug the usb cable from the Esp32 to laptop?
Sir i am facing burnout error what is the solution sir please help me...
most probably it is the USB voltage or power. try powering it up from a batter USB power source.
halo, how can make this board take a picture everyday with scheduling no trigger?
if you need time like or hours then you need Real-Time-Clock or RTC that has alarm. here is full video on RTC ruclips.net/video/gz9xqvRroDY/видео.html but you can use the alarm feature of it.