good vid. may i ask where did you buy or order the conversion kit? i would like to convert my mt. bike to a trike due to my being inflicted with vertigo. your help will be appreciated. Thank you
So this axel can take any wheels with a 5/8 or larger bore correct? If you didn't want to spoke those hubs, you could theoretically use a couple of mag wheels or already assembled wheels as long as they had the 5/8 bore right? I can't see why not. I'm buying one tight now. My scooter has a 5.25" dropout and I've got an extra rear rim, both happen to be solid aluminum with 5/8 bore and keyway. This is exactly what i was looking for. I'll let you know how it turns out once i mount the 1200 watt electric motor and pump 52 volts through it. This is gonna be epic
Exactly what i was thinking. I have some mag wheels im about to try and see. Any progress on yours? I have a desoto classic from back in the day. And a town a country . desoto rides super smooth
You have to have a wheel that has room to accommodate the 3 bolts that fasten the wheel to the disc on the end of the driven axle. The driven axle has the bike sprocket at one end and the disc at the other.
For what it would cost to convert my bmx or any other bike at that I would much rather buy a used trike and save money and use what money I saved to throw a motor on it. Just makes more sense that way.
Is this a 17 mm or 15 mm axle? I see that many trikes seem to have a defect and either the drive side axle breaks or the spokes break regularly causing you to have a wreck. Does this setup have a weight rating? I know the cheap schwinn trike I have only has a 250 lb rating and the better trikes have a 350-500 lb rating. Where does this one stand??
Is the hub flipped around? The chain coming off the crank is on the right side of every bike I have ever seen, it wont work with the configuration you have here.
it has a hub that acts as a jackshaft(also has coaster brake) if you look at the video, it puts the final drive sprocket to the other side, some bmx cranks and hubs do route on the left side instead of the right so they can grind on curbs if you wanted to run straight from the front sprocket eliminating the jackshaft you would have a fixed gear trike, the final drive chain in the setup in the video always spins with the wheel it is a 2 chain drive setup
Hey bro I have a question for you. My axle moves left and right. When I tighten the cruise tire it pulls the drive drive shaft tire. If I loosen the cruise tire it wobbles. If I tighten the cruise tire it makes the drive tire up against the frame scrapping it, making a grinding noise and it gets tight to turn. How do I fix it my problem. Thank you
and notice they never replied to your coment a colar on the shaft on the inside to the right would keep it fom pulling the drive side into the frame you would have play with it to get right and not bind up none drive side for the munny there charging for that kit get you munny back and buy one online
Creen q pudieran hacerlo en español, se mira excelente el vídeo pero lo único q para entenderlo lo deja a la imaginación d la persona. De antemano gracias 👏. 👏. 👏. 👏. 👏. 👏.
This rear conversion is JUNK it doesn't even include NYLON nuts for the axles so they don't back off. ONLY one wheel power and drum brakes how CHEAP can you get what a piece of CRAP
Great video its straightforward thanks for the resource!
Can you make a video on how to assemble and bolt on to a bike frame
Do you have any follow up videos of installing this.
El mejor video de triciclo lowrider
Hey,BicycleDesigner....have any multispeed trike concersions kits??
if so...part numbers,prices would be appreciated!!
🎁😀♿
Hi how can I get the machine part
Does this conversion kit include wherls
good vid. may i ask where did you buy or order the conversion kit? i would like to convert my mt. bike to a trike due to my being inflicted with vertigo. your help will be appreciated. Thank you
E Bay and Amazon both have that kit
So this axel can take any wheels with a 5/8 or larger bore correct? If you didn't want to spoke those hubs, you could theoretically use a couple of mag wheels or already assembled wheels as long as they had the 5/8 bore right? I can't see why not. I'm buying one tight now. My scooter has a 5.25" dropout and I've got an extra rear rim, both happen to be solid aluminum with 5/8 bore and keyway. This is exactly what i was looking for. I'll let you know how it turns out once i mount the 1200 watt electric motor and pump 52 volts through it. This is gonna be epic
Exactly what i was thinking. I have some mag wheels im about to try and see. Any progress on yours? I have a desoto classic from back in the day. And a town a country . desoto rides super smooth
You have to have a wheel that has room to accommodate the 3 bolts that fasten the wheel to the disc on the end of the driven axle. The driven axle has the bike sprocket at one end and the disc at the other.
For what it would cost to convert my bmx or any other bike at that I would much rather buy a used trike and save money and use what money I saved to throw a motor on it. Just makes more sense that way.
The think about these Lowridering ain’t cheap gonna pricy no matter what
❤😂
Why didnt you post it being fitted to the frame? .. That is what people want to see
Saludes desde limon C.R,cual es el costo y como puedo obtener ese diferencial de triciclo
Do the install man.
where i can buy this unit...my location phillipines
What's the cost for this project
hey man how you doing, if you sell these kits am looking for one to buy, so if yes let me know.
Can i buy the hub so i can make it fat tire trike
Please explain why there are two axles.
when walmart sold trikes hanging from the cieling years ago BRAND NEW was STILL cheaper than the conversion kit.
Walmart on a single speed trikes can't convert 2 multiple speed trikes
@@sadbrit4906 Huh?
Is this a 17 mm or 15 mm axle? I see that many trikes seem to have a defect and either the drive side axle breaks or the spokes break regularly causing you to have a wreck. Does this setup have a weight rating? I know the cheap schwinn trike I have only has a 250 lb rating and the better trikes have a 350-500 lb rating. Where does this one stand??
How do you get the bults thru 144 spoke?
Need help have hollow hub kit on a HB cruiser and trying to fit a nexus 3 speed hub on it!!
What about spokes.? Guess that's a lot more $
Saludos desde Chiapas México, cual es el costo de esta pieza y como me puedo comunicar ,
Hi, how i can get the kit please
eBay or amazon has them
Is the hub flipped around? The chain coming off the crank is on the right side of every bike I have ever seen, it wont work with the configuration you have here.
it has a hub that acts as a jackshaft(also has coaster brake) if you look at the video, it puts the final drive sprocket to the other side, some bmx cranks and hubs do route on the left side instead of the right so they can grind on curbs if you wanted to run straight from the front sprocket eliminating the jackshaft you would have a fixed gear trike, the final drive chain in the setup in the video always spins with the wheel it is a 2 chain drive setup
So why don`t you show how to fix it to the bike.
El pricio del kit completo xfa la quiero para 2 bicicletas lowreider
Ciao, quanto costa il kit per la bicicletta da 26 pollici?
Grazie mille per la disponibilità. 💐💐💐
That dont explaine hoe it attaches to the bicycle specifically.
thanks a bunch
Sucks that it's only 1 wheel drive, should have made both rear wheels pull.
you would want a differential if both wheels pulled because it would have real bad steering, a lever operated locker would be super sweet though
Very fine
Me gusta necesito una diferencial adecuada para mí triciclo
hey dude" how much for the converter kit ? and do you carry the four weel back converter ?
You are so high, if you think I'm gonna re-string a rim
cual es el precio y lo envían a Perú???
How much $
Hoy.I lovin't your trike sistem!!! Como puedo tener uno para triciclo todo.26? I from BsAs.pleast'mitoyou
SUBSCRIBED 🖒
woooow!!! 👏🖒👏 Thank you. Exactly what I was looking for.
Hey bro I have a question for you. My axle moves left and right. When I tighten the cruise tire it pulls the drive drive shaft tire. If I loosen the cruise tire it wobbles. If I tighten the cruise tire it makes the drive tire up against the frame scrapping it, making a grinding noise and it gets tight to turn. How do I fix it my problem. Thank you
and notice they never replied to your coment a colar on the shaft on the inside to the right would keep it fom pulling the drive side into the frame you would have play with it to get right and not bind up none drive side for the munny there charging for that kit get you munny back and buy one online
cuanto cuesta el kit?,
y de donde es?
para calcular el envió a mi domicilio.
Could this be used for a motorized drift trike?
Me interesa dónde lo puedo comprar
How much for this kit
Where is this from?
is it the same for 144 spokes hallow hubs wheels?
That's my question.
Dud u get a answer?
Creen q pudieran hacerlo en español, se mira excelente el vídeo pero lo único q para entenderlo lo deja a la imaginación d la persona. De antemano gracias 👏. 👏. 👏. 👏. 👏. 👏.
is good job
Dear Friend, can you give me prices and i will ask you if you can send it to Portugal !?
Thanks
the drive hub just looks like a formula style hub with holes drilled in it, but it would be easyer to replace than a splined hub
can you mount an 80cc eng to this?
bigfoot6869 sasquatch yes
snapped off yet?
How much for kit
phon chau afk
How easy is this during cornering? I believe it should have a differential. I will send you an email if I can get your email address. Thanks
이거 어디에서 구입할 수 있나요? 사고 싶은데...
No bearing on the back hub ? Sounds kind of cheap made.
The drive hub is attached with bolts to the axle. The other hub has inner and outer bearings and rides on the axle.
Como aser una tramicion para triciclo
Hi bother if you can make one for me.i likes your items. I want buying for u.
I from Singapore 🇸🇬. Can you send to me
how modify my riksa. ..
tell me
cuanto lo vendes
A...a...a....a ...CAMON !
Do you offer this kit for sell?
NO WHEELS ??? Just hubs......my bike shop wanted $ 495. for two rims, spokes, assembly of them.
ممتازه
Per cortesia se puoi rispondere in lingua italiana grazie.
This rear conversion is JUNK it doesn't even include NYLON nuts for the axles so they don't back off.
ONLY one wheel power and drum brakes how CHEAP can you get what a piece of CRAP
por FA bor