Thanks for watching! Which would you prefer? It's important to note that this isn't a review of these guns (I haven't shot them). This is just an overview of the specs / features to help your preorder decision!
There’s nothing wrong with a 6.03, I’d be upset if it was a cheap cyma 6.08 but it depends. A cheap 6.01 can get outperform by a decent 6.05 , it all depends on quality and finish
True, but I think we can both agree that if quality were equal on both the 6.01 would outperform the 6.03 all day long. The difference wouldn't be massive by any means but it would definitely shoot a bit better.
@@AirsoftGunsnGear I tried a lot of barrel setups on my aegs and sniper Tighter bore will increase slightly the fps But will be less precise for long range shots The difference is a bit noticeable on an aeg But on a bolt action sniper, the 6.01 was shooting randomly left, right up down It was an AAC precision barrel I then switched to a Maple Leaf 6.04 Straight shots Every time Tighter bore doesn't mean better It's good to get some more fps out of a short barrel, but on a decent barrel size, it's useless and will just be less precise than a bit wider bore Novritsch himself tested a whole bunch of barrel bores Same result : bigger diameter = better accuracy
@@AirsoftGunsnGear Outperform how? I read that tighter makes the fps higher but the ball bounce more inside which lowers accuracy, but wider lets more air escape so less fps but cushions the bb in the barrel so is more accurate long distance?
You compare two guns you never played. Let me tell you something, I played the krytac, the body is awesome, original markings. Check out the yt channel of acs-suedharz, they have one, I think the first in Europe.
I've heard that a tighter barrel doesn't necessarily mean better accuracy. The opposite has been the case many times. I also wouldn't put a 6,01 mm barrel in a smg/ar type rifle due to to much abrasion of the bbs in the barrel. This could cause inconsistent accurarcy. You would have to clean the barrel more often. A barrel alone doesn't necesserly helb, the combination of hop-up bucking and tensioner is the key. Also i would have liked you to talk about the Krytec's magazine and the "shut-off"-feature, which comes with it. Also the Binary trigger wouldn't fit on the Krytec P90 because, as you said, they are going for realism. A Binary trigger is not standart on a normal real steel P90. The lower RPS is subjective i guess. I know field in my area where i am not allowed to use guns on full auto, which have a higher rps than 20 and i am personaly a semi-guy. If you like the higher rate of fire, i guess you would be happier with the Novritsch SSR90.
As long as the barrel is made well then the tighter the barrel is the more accurate the bb will fly. The bigger the barrel is, the more space the bb has to fly at a slight angle causing slightly worse accuracy at longer range. As long as you are using high quality bbs it shouldn't cause to much abrasion because the bb is still smaller than the barrel. Obviously it is always a good idea to clean your barrel if you want to get the best performance. Absolutely agree that the hopup is equally if not more important than the barrel.
Well Krytac is going for realism. Novritsch was going for airsoft effectiveness first and foremost and that's why things like the binary trigger and extra QD attachment additions are there on the SSR90 when they don't exist on the real p90. I think I've also heard Novritsch, or at least other youtubers, mention in some videos that they hoped the higher rd count (without cut off feature), small profile, and customizable triggers (both in pull and colors) would lead to their usage in speedsoft.
I owned a $140 Cybergun P90 and frankly, that thing shot like there was no tomorrow. Got the Krytac P90, that thing also shot like there was no tomorrow. The Krytac is super solid when it comes to internals and durability from my experience. Novritsch doesn’t have a very good reputation for QC weapons, but I’d say their P90 is okay.
But the real steel versions the p90 beats the mp7 in every way the round it fires down to range of penetration. Watch a video on it and you’ll know why the p90 is the better option
The gearbox of Novr is made of cheap materials, seem like JG or cyma, and its performance is suck even using 6.01 barrel. It's over pricing too much for providing such a cheap gearbox. The performance of Krytac ia amazing if you own its Tridents series. Their hop-up is good and very accurate even using 6.04 barrel. You should update your video as Krytac P90 is available now and it had 2 stage and adjustable trigger which definitely beat Novr. I'll definitely go for a Krytac P90 if choose.
This seems like 110% speculation. "cheap materials", "will definitely beat", these are very fluff terms. The Nov still has over 5 more RPS with the same battery, a binary trigger right out of the box (good for CQB where full auto is banned, which is in large part that it's for), sling points added to the side, etc. For significantly cheaper. I haven't shot either but I don't see a single spec that is actually any worse, sorry. Just seems like they focused on function more than being an exact replica of the original model. Which is fine by me.
Can confirm that the Krytac has a two-stage trigger now. I also think the Krytac magazines are really useful for both Milsim and just having fun. The internals on the Krytac gun are really solid, definitely well-built.
Thanks for the information! But, to fast blabla and to much "kidcatching" youtuber blabla.... More information less assumptions, id suggest... Fuq pricepoints n such, get the guns, disassemble the guns and REALLY compare them!
I'm in the USA, I preordered the SSR90 back in August and it's price was $399. Been out of stock for awhile now but it does show a price tag of $385 now
@@GingerBeardMan81 price on it is kinda weird, shot way up on Evike. Part of me wonders if they're trying to turn people off to it since they have their own version. Not sure how that all works. I pre-ordered at 385.
Idk why they decided to make p90s, it’s an awful system to run, feeding issues, low reliability, in my opinion both are bad,krytacs are overpriced and novritch doesn’t have a good record for qc.
@@beverlyhoyle643 I agree it's not worth it's value. If it came with a titan mosfet then I can justify the price. However, that's not the case as there are much better options.
Спорт
![KSI - Thick Of It (feat. Trippie Redd) [Official Music Video]](http://i.ytimg.com/vi/At8v_Yc044Y/mqdefault.jpg)
Thanks for watching! Which would you prefer?
It's important to note that this isn't a review of these guns (I haven't shot them). This is just an overview of the specs / features to help your preorder decision!
Thanks! They are definitely some of the best SMG’s on the market!
Nov needs to stick to spring snipers 🤣
There’s nothing wrong with a 6.03, I’d be upset if it was a cheap cyma 6.08 but it depends. A cheap 6.01 can get outperform by a decent 6.05 , it all depends on quality and finish
True, but I think we can both agree that if quality were equal on both the 6.01 would outperform the 6.03 all day long. The difference wouldn't be massive by any means but it would definitely shoot a bit better.
@@AirsoftGunsnGear yea 6.01 doesnt mean its better.
@@AirsoftGunsnGear I tried a lot of barrel setups on my aegs and sniper
Tighter bore will increase slightly the fps
But will be less precise for long range shots
The difference is a bit noticeable on an aeg
But on a bolt action sniper, the 6.01 was shooting randomly left, right up down
It was an AAC precision barrel
I then switched to a Maple Leaf 6.04
Straight shots
Every time
Tighter bore doesn't mean better
It's good to get some more fps out of a short barrel, but on a decent barrel size, it's useless and will just be less precise than a bit wider bore
Novritsch himself tested a whole bunch of barrel bores
Same result : bigger diameter = better accuracy
@@AirsoftGunsnGear Outperform how? I read that tighter makes the fps higher but the ball bounce more inside which lowers accuracy, but wider lets more air escape so less fps but cushions the bb in the barrel so is more accurate long distance?
You compare two guns you never played. Let me tell you something, I played the krytac, the body is awesome, original markings.
Check out the yt channel of acs-suedharz, they have one, I think the first in Europe.
Doesn't mean that it's better than the ssr90
do people really care about trademarks?? I just want a nice gun 🔫
Oh yes, non of that Chinesium branding.
I've heard that a tighter barrel doesn't necessarily mean better accuracy. The opposite has been the case many times. I also wouldn't put a 6,01 mm barrel in a smg/ar type rifle due to to much abrasion of the bbs in the barrel. This could cause inconsistent accurarcy. You would have to clean the barrel more often. A barrel alone doesn't necesserly helb, the combination of hop-up bucking and tensioner is the key.
Also i would have liked you to talk about the Krytec's magazine and the "shut-off"-feature, which comes with it. Also the Binary trigger wouldn't fit on the Krytec P90 because, as you said, they are going for realism. A Binary trigger is not standart on a normal real steel P90. The lower RPS is subjective i guess. I know field in my area where i am not allowed to use guns on full auto, which have a higher rps than 20 and i am personaly a semi-guy. If you like the higher rate of fire, i guess you would be happier with the Novritsch SSR90.
As long as the barrel is made well then the tighter the barrel is the more accurate the bb will fly. The bigger the barrel is, the more space the bb has to fly at a slight angle causing slightly worse accuracy at longer range. As long as you are using high quality bbs it shouldn't cause to much abrasion because the bb is still smaller than the barrel. Obviously it is always a good idea to clean your barrel if you want to get the best performance. Absolutely agree that the hopup is equally if not more important than the barrel.
Well Krytac is going for realism. Novritsch was going for airsoft effectiveness first and foremost and that's why things like the binary trigger and extra QD attachment additions are there on the SSR90 when they don't exist on the real p90. I think I've also heard Novritsch, or at least other youtubers, mention in some videos that they hoped the higher rd count (without cut off feature), small profile, and customizable triggers (both in pull and colors) would lead to their usage in speedsoft.
@@MB-tc7tw sounds plausible. I think reloading would be a factor which could scare players off. Put otherwise the P90 is a great cqb platform!
I owned a $140 Cybergun P90 and frankly, that thing shot like there was no tomorrow. Got the Krytac P90, that thing also shot like there was no tomorrow. The Krytac is super solid when it comes to internals and durability from my experience. Novritsch doesn’t have a very good reputation for QC weapons, but I’d say their P90 is okay.
Krytac all day
And people say you pay for the name with novritsch
Lol, watching this in April 2022 and laughing at how 'expensive' those prices are. xD
Bruh have you seen the Kriss Vector??
sorry to rain on your parade but the mp7 is definitely the coolest smg
But the real steel versions the p90 beats the mp7 in every way the round it fires down to range of penetration. Watch a video on it and you’ll know why the p90 is the better option
what about the Cybergun P90?
Not even remotely in the same league as these two
@@jarjared3522 thank You!
Solid video
It’s the man himself!
@@AirsoftGunsnGear yessir. Loved the video. I have the novertisch version. For the price it was very enjoyable. Keep up the great work.
Thanks, will do. That’s nice, I haven’t had a chance to shoot it yet but from the specs it sounds great
im gonna get a cybergun p90 at least they are in stock
Ppsh 41 is the best smg in the world in my humble opinion
Bit of a naive review. Plus I'm fairly sure you're never going to have both of these.
The gearbox of Novr is made of cheap materials, seem like JG or cyma, and its performance is suck even using 6.01 barrel. It's over pricing too much for providing such a cheap gearbox.
The performance of Krytac ia amazing if you own its Tridents series. Their hop-up is good and very accurate even using 6.04 barrel.
You should update your video as Krytac P90 is available now and it had 2 stage and adjustable trigger which definitely beat Novr.
I'll definitely go for a Krytac P90 if choose.
This seems like 110% speculation. "cheap materials", "will definitely beat", these are very fluff terms. The Nov still has over 5 more RPS with the same battery, a binary trigger right out of the box (good for CQB where full auto is banned, which is in large part that it's for), sling points added to the side, etc. For significantly cheaper. I haven't shot either but I don't see a single spec that is actually any worse, sorry. Just seems like they focused on function more than being an exact replica of the original model. Which is fine by me.
Can confirm that the Krytac has a two-stage trigger now. I also think the Krytac magazines are really useful for both Milsim and just having fun. The internals on the Krytac gun are really solid, definitely well-built.
Ooh I'm early, love your vids
Thanks! Glad you enjoyed it
Thanks for the information!
But, to fast blabla and to much "kidcatching" youtuber blabla....
More information less assumptions, id suggest...
Fuq pricepoints n such, get the guns, disassemble the guns and REALLY compare them!
Just want to point out on the price point, evike it's $449 dollars and novritsch is €399 euros which equates to $459 dollars
It's cheaper in the US for whatever reason. The Nov literally retails for $385 USD. They actually lowered it like a week ago. Weird.
I'm in the USA, I preordered the SSR90 back in August and it's price was $399. Been out of stock for awhile now but it does show a price tag of $385 now
@@GingerBeardMan81 price on it is kinda weird, shot way up on Evike. Part of me wonders if they're trying to turn people off to it since they have their own version. Not sure how that all works. I pre-ordered at 385.
2:27 NOT ANYMORE! SSR90 got licenced by FN Herstal so marks on the SSR90 as well :D
No it didn’t
All it has is dog shit NOVRITSCH plastered all over it
That’s a lie, SSR90 isn’t even a real gun
Привет из России. Спасибо большое за видео)))
Idk why they decided to make p90s, it’s an awful system to run, feeding issues, low reliability, in my opinion both are bad,krytacs are overpriced and novritch doesn’t have a good record for qc.
They decided to do P90s because the platform hasn’t been improved on for the longest time. There was a hole in the market and they filled it.
@@cherrypoppins4152no matter what you do to the platform it’s still bad
@@beverlyhoyle643Krytac pretty much redesigned p90 system.
@@pspmaster510 still don’t think it will be good or at least will be very overpriced.
@@beverlyhoyle643 I agree it's not worth it's value. If it came with a titan mosfet then I can justify the price. However, that's not the case as there are much better options.