Omg, I can't believe I didn't even check to see if the legs unscrewed. You were my last chance at finding the solution of how to mount this thing before I began either drilling holes or throwing it in my scrap electronics pile.Thank you, I got what I was after almost immediately after the video started. You are awesome.
*Yes! We are really happy with my **Bestt.Digital** projector. It is definitely recommended for those who are looking for something very good but affordable.*
@@dylanvetick2719 I just went to home depot and got some of those metal ones that fan out when you tighten them. www.walmart.com/ip/Wideskall-6-1-5-inch-Heavy-Duty-Zinc-Plated-Steel-Hollow-Drive-Wall-Anchors-for-1-2-inch-drywall-board-Pack-of-60/941324683?selected=true I know this is walmart and not homedepot but it was the first google search item. It have been up there since, no problems.
Would this serve me to project to a wall or the floor for large image art projects as well as on a 45 degree angle onto a drafting table? I want it to be versatile enough for all 3. Does it lock in position so it doesnt loosen off after awhile? Answer much appreciated. Thanks
I'm confused on how you screw it into the wall. The braket is to big to go on a stud so is it safe to just screw into the drywall with the provided expansion bolts?
Help! I believe I bought the wrong ceiling mount. There weren't any screws that wrre small enough to fit the sockets of the projector :( What do I do now ?
😣😣😣Please feel free to contact us if you have encountered any issues with this product. Please contact us through below contact information: Facebook Messenger: facebook.com/VankyoOfficial Support Email: support@ivankyo.com
Vankyo sells more newer models in USA and old outdated garbage models in Canada. Example V700 or V630W or VF630T or VF620T (Newer models) are sold only in USA and not in Canada. What a partiality service that is Vankyo ???? By this Canadian customers are forced to only buy outdated models. I didnot buy V630 for its very high fan noise. Many had complaints with V630 for its fan noise.
We are so sorry for any inconvenienca caused to you. Please kindly check if the fan noise is continuous, intermittent or irregular. If it is continuous, please try the below tips: 1. Try to use an external speaker. 2. Place the projector far from the sitting area. 3. Increase the volume. When it is quiet around and the volume of the video is low, the noise will be more obvious since there are two fans inside the machine for thermal purposes. We sincerely apologize if this caused any inconvenience and recommend using an external speaker along with the projector.
![✅ TOP 5 Best Projector Ceiling Mount of 2024 [Buyer's Guide]](http://i.ytimg.com/vi/SQ42mp-iy7I/mqdefault.jpg)
Omg, I can't believe I didn't even check to see if the legs unscrewed. You were my last chance at finding the solution of how to mount this thing before I began either drilling holes or throwing it in my scrap electronics pile.Thank you, I got what I was after almost immediately after the video started. You are awesome.
👍👍👍
*Yes! We are really happy with my **Bestt.Digital** projector. It is definitely recommended for those who are looking for something very good but affordable.*
Thank you so much! The directions don't say take the legs off and that could have been curtains for my projector. Thanks!
Damnit. it was the anchors that I needed to know how to use!! Thanks anyway.
Did you figure the anchors out because I’m at this point as well where I need to anchor but idk how the wedge anchors well or not
@@dylanvetick2719 I just went to home depot and got some of those metal ones that fan out when you tighten them. www.walmart.com/ip/Wideskall-6-1-5-inch-Heavy-Duty-Zinc-Plated-Steel-Hollow-Drive-Wall-Anchors-for-1-2-inch-drywall-board-Pack-of-60/941324683?selected=true I know this is walmart and not homedepot but it was the first google search item. It have been up there since, no problems.
Literally smh
Would this serve me to project to a wall or the floor for large image art projects as well as on a 45 degree angle onto a drafting table? I want it to be versatile enough for all 3. Does it lock in position so it doesnt loosen off after awhile? Answer much appreciated. Thanks
Thanks so much brother!! Made life easy with this
😁😁
How do I flip the screen after I mount it?
I'm confused on how you screw it into the wall. The braket is to big to go on a stud so is it safe to just screw into the drywall with the provided expansion bolts?
If you need more help, please don't hesitate to contact our support: support@ivankyo.com
can the 510 be used?
What if your little leg pieces don't screw on/off?
Anyone know what size screws the legs are? Screws that were sent out for mount are too big
Since it is mounted to the bottom will the projector image be upside down also? I have a similar model by this brand and I've never mounted it before
you can change the projection direction
How the heck do i mount the v620? Can’t remove the rubber feet on this thing.
Thanks for your asking. For this issue, please contact support@ivankyo.com for help.
Help! I believe I bought the wrong ceiling mount. There weren't any screws that wrre small enough to fit the sockets of the projector :(
What do I do now ?
does this work with the leisure 3
no
Hi everyone
Question, I want to project the picture to my wall, what’s the best paint that works great with this projector?
I used a flat white base then let it dry for a couple days then went over it with a gloss white. Then did a black boarder Looks amazing
The link is broken on Amazon. Where can I buy this?
This link is for your reference: ivankyo.com/collections/projector-accessories
Can the leisure 410 be mounted with this as well?
Hi Sleve, merry christmas, sorry, leisure 410 can't be mounted with this ceiling/wall mount, at present.
no, it says this in the caption of the video
if this does not work with the leisure 3, what does?
You can try the Vankyo PM50 mount.
can you use this with the leisure 3?
No, it does not fit Leisure 3. You can try the Vankyo PM50 mount for leisure 3.
dam, those ceiling screws look so long that it will drill hole into the upper room lol
😣😣😣Please feel free to contact us if you have encountered any issues with this product.
Please contact us through below contact information:
Facebook Messenger: facebook.com/VankyoOfficial
Support Email: support@ivankyo.com
So you fly a drone has?
If you meet any issues during using the projector, please contact support@ivankyo.com for help.
Really helpful
😀😀😀
Can v600 be used?
Hi, yes
Can I use this for my 620?
What’s the name of the ceiling mount
Nestling® 13-65cm Up to 20kg Projector Ceiling Mount Bracket
Vankyo sells more newer models in USA and old outdated garbage models in Canada. Example V700 or V630W or VF630T or VF620T (Newer models) are sold only in USA and not in Canada. What a partiality service that is Vankyo ???? By this Canadian customers are forced to only buy outdated models. I didnot buy V630 for its very high fan noise. Many had complaints with V630 for its fan noise.
We are so sorry for any inconvenienca caused to you.
Please kindly check if the fan noise is continuous, intermittent or irregular.
If it is continuous, please try the below tips:
1. Try to use an external speaker.
2. Place the projector far from the sitting area.
3. Increase the volume.
When it is quiet around and the volume of the video is low, the noise will be more obvious since there are two fans inside the machine for thermal purposes. We sincerely apologize if this caused any inconvenience and recommend using an external speaker along with the projector.
Yaw referance
😁😁