In my opinion, the engine does not stop. It's nothing but play in the gearbox. To check this, just remove the cover from the transmission and you will find that the motor rotates all the time.
I also thought so that there may be slops in the gears. It's just hard to confirm with my TRX4 because the pinion is not visible from the outside. Overall it's a a great motor. It's the same as their original version of Fusion.
I was about to say the same thing that you did what he is seeing is play in the gears I have two hobbywing ax systems and I just recently bought a hobbywing fusion Pro that I'm getting ready to do a video on
Others RUclipsrs put that motor to the test, pulling 10 pounds the motor don't overheat, some people consider the motor don't have the punch because of the low kv, crawling is that using the low kv to have torque
Very low low crawling but how much wheelspeed ,punch is also possibel with the same gearing? Would be nice to show how low and how fast is it possibel with the same gearing.
In my opinion, the engine does not stop. It's nothing but play in the gearbox. To check this, just remove the cover from the transmission and you will find that the motor rotates all the time.
I also thought so that there may be slops in the gears. It's just hard to confirm with my TRX4 because the pinion is not visible from the outside. Overall it's a a great motor. It's the same as their original version of Fusion.
I was about to say the same thing that you did what he is seeing is play in the gears I have two hobbywing ax systems and I just recently bought a hobbywing fusion Pro that I'm getting ready to do a video on
Others RUclipsrs put that motor to the test, pulling 10 pounds the motor don't overheat, some people consider the motor don't have the punch because of the low kv, crawling is that using the low kv to have torque
Yes, if you want more punch go for higher KV but with the Fusion Pro despite of having higher KV it also has a better low speed control.
KV is not kilovolts. It is RPM/volts
Yes, you're right
I plan on putting this in my jlu build! Great video
Just put one of these in my 8.5 lb Capra. No overheating. Works great for a budget motor/ESC!
The stop is play in the drive line
Yip, motor will be running continually, its just running through then drive train slop.
I have one ☝️on the way Jan 9 going on my trx4 sport!
cool vid! congrats! big like!! 👍👍👍
It stops for a moment because it's taking up the play in the transmission due to it dropping over the obstacle.
Very low low crawling but how much wheelspeed ,punch is also possibel with the same gearing? Would be nice to show how low and how fast is it possibel with the same gearing.
Check out my other video. I was running it at the park, at some point in full speed. Take note I have low gearing setup.
Nice video 👍👍
Thanks man
How do you know if it's real one or knock-off? Hologram seal is not that reliable...is it?
Based on it's performance it's the real deal. I've already trailed it in the park earlier. I'll upload the video later.
Eu também não gostei da parada dele quando desce um obstáculo no minuto 11:45
Nice!😎👍
Do you need to program with a card or can you just use throttle to drive
You can use it out of the box, but if you want to change parameters you will need a program card.
This is weterproof or knot weterproof sir..????
It's waterproof. I have personally tested it running underwater.
tqvm for you info sir..
Awesome wheels, what are they? 🤩
It's from injora
Batrre berapa S 🙏🙏
Réf carte programmation svp
Bro kaya ba ng 1200kv ang trx4?
Goods ba sya pang trailing?
Sana mapansin hehe
Yes, of course. Ano gamit mong motor ngayon?
@@JRTGarage sa ngayon bro naka HW1080 esc ako at 550 5slot 12T motor .
Di pa dumating yong fusion se 1200kv ko