"this is going to be a bigger project then we expected" the famous last words of anybody doing any work at all on a 3KGT!!! LOL from a fellow 3KGT Owner..much love bro keeping one of the rare 90's gems out of the crusher.
Holy charge piping Batman! I thought the B5 S4 had a lot of charge piping when you install a front mount but that is crazy. Props to you guys for installing it.
Make sure you have a really good cooling system. I have the same setup and the car runs much warmer in CA in the summer. You will have much more lag with the larger intercooler on oem turbos. If you upgrade to 15g you will actually notice the benefit of the larger intercooler. Great videos.
Hell yes dude this 3000gt is going to be so bad ass. I always picked these cars on the original Gran Turismo on ps1 Everytime with out fail I would stomp my dad out lol
You really should do a Vacuum Reduction and remove that clutch assist line and a bunch of other random vacuum lines. Makes working on the car much much easier.
Those little 9b turbos have to be working so hard...you should replace them with two 11c turbos or even two 14b turbos with 6cm exhaust housings. I built a 4g63t 92 Colt hatch, and I had a 90 Talon Tsi AWD, so I know a little about DSMs, GVR4s, and 6G72s, but its been a long long time.
ha!..you sure didn't know what you were getting yourselves into. the fact that its a CX kit means fitment probably wasn't the best either..you guys unfortunately made a tough car already to work on, even tougher.
This was a complete waste of money. If you plan on sticking with the stock 9b's, there is absolutely no reason for a FMIC. You guys should actually research what mods to do to these cars.
This channel honestly deserves more subs. Great videos. Great content. Amazing builds. I love this channel and i hope to see it succeed
thanks for the support man! Appreciate it big time 🤘
Agreed ;)
I agree!
+1 rly like this channel! And that VR4 :o :o :o Super rare here in Belgium! keep it up!
The music though... SO obnoxious. Sheesh.
"this is going to be a bigger project then we expected" the famous last words of anybody doing any work at all on a 3KGT!!! LOL from a fellow 3KGT Owner..much love bro keeping one of the rare 90's gems out of the crusher.
Holy charge piping Batman! I thought the B5 S4 had a lot of charge piping when you install a front mount but that is crazy. Props to you guys for installing it.
German Elite Tuning yeah, we have a lot of piping. My smic were a bitch to put on
Make sure you have a really good cooling system. I have the same setup and the car runs much warmer in CA in the summer. You will have much more lag with the larger intercooler on oem turbos. If you upgrade to 15g you will actually notice the benefit of the larger intercooler. Great videos.
We just not gonna address the fact that y’all had a deadly spider living in the car?
Alex Julian hahahaha
Alex Julian I was wondering that myself. Dude just blew that minute detail off like, oh well.
Alex Julian gotta be something deadly about this car
This has to be my most favorite build/restore at the moment
You have a good friend. Rick carried on for you when you split. Hat's off to him. He deserves it.
I love seeing videos on the 3000 GT build. Keep them coming.
Hell yes dude this 3000gt is going to be so bad ass. I always picked these cars on the original Gran Turismo on ps1 Everytime with out fail I would stomp my dad out lol
Found this channel with the vr4 build! And what a channel I have found 😮
You said it... Should be easy. You know by now every time you say that about anything especially cars you are in for a treat.😂😂😂
Mas Power!!!
Shoutout to the black widow 👌🏼
You really should do a Vacuum Reduction and remove that clutch assist line and a bunch of other random vacuum lines. Makes working on the car much much easier.
Those little 9b turbos have to be working so hard...you should replace them with two 11c turbos or even two 14b turbos with 6cm exhaust housings. I built a 4g63t 92 Colt hatch, and I had a 90 Talon Tsi AWD, so I know a little about DSMs, GVR4s, and 6G72s, but its been a long long time.
Boosted B Series EK maybe a pair of 19 t's?
Just get rid of the charcoal canister, do a vacuum reduction and flash the ECU to get rid of any CEL lights.
Yo clean your lights and send them to flyride and also we wanna see the bacl widow
Put the oil cooler in the stock inter-cooler location. Better cooling and more bling.
Great work fellas!!
The 3000GT Bomb
So uhhh y’all get rid of that black widow?
😆
I have 92 vr4 that has been sitting on my driveway since 2003. This project makes me wanna bring it back to life.
Did you do the timing belt / 60k yet with genuine mitsu tensioner yet?
When are you changing transmission??
Wait for Tj to go to New Zealand so you guys can work on your car! Nice.
Saw what looked like a Dodge emblem on the headrest.......maybe a viper? 🤔
Get a 99 vr4 combat wing for it, it will look sick. Gained a subscriber!
CWB squad 🤙🏽👍😊
this channel is more about selling stuff and supporting their sponsors. please get back to the days of producing entertaining content.
They got a lotus!
What's the part number on the tial blow off valve?
Alfa Romeo 4c?
e36guy looks like it, they are awesome in person
🤔
What’s the background music at the very end when the guy said “the boys at the shop say I am the og”...????
alfa ? 4c?
Hey can you guys do a vid on cleaning that crusty intake?
Well, that's what happens when a car is designed in CAD. LOL
Is that a viper? Thought I saw the emblem on the seat. Plus the door looks familiar.
Michael Berube II it's a lotus, like the one you can see through the drivers window
Ross Colyer you’re right. Great eye!
🤔
I love my 1992 vr4 im following
Thats a Lot of pips.. Damn
FMIC is a waste on stock turbos for these cars... should have gone with sidemounts.
#coffeewithbeckerman
Polish that intake!
how many power have you win
8 comments ,lets get em up
The chances of me working or driving that car without a confirmed kill on that Black Widow is 0%.
bring up da pop up headlights
Its an Alfa Romeo 4C!!
"Essentially"
nice alfa romeo 4c
Nice Alfa at the end......btw you dont need that charcoal canister, get rid of that shit. I got rid of mine on my dsm years ago
Alfa romeo 4c is the next build
ya never know! 😶
Thats a honda crz most probably at the last of the video.
Dam it looks good but so many pipes looks like a fucking hamster maze lol. Looks good doe!
62nd!
ha!..you sure didn't know what you were getting yourselves into. the fact that its a CX kit means fitment probably wasn't the best either..you guys unfortunately made a tough car already to work on, even tougher.
Subtitulo en español por favor.
Does it bother anybody else how they are doing all this stuff to the engine bay & didn’t even clean it 😤🤦🏽♂️
I hope thats the GSX
No wonder you asked for helpers on insta .with all that space you will need an 8 year old to get it in there
So you’re turning a $5000 VR4 into a $10000 car by investing $15k?
Mitchell Guyon lol yeah if you can find a 5k Vr4. Usually a Vr4 with 95k cost about 12k.
Third
370z?
Second 😀😁
Fourth
First
This was a complete waste of money. If you plan on sticking with the stock 9b's, there is absolutely no reason for a FMIC. You guys should actually research what mods to do to these cars.
We don’t necessarily planning on sticking stock twins...plus whoever gets the car in the future will be all set for larger turbos.
Fifth
What's the point in a build if it's with cxracing crap.
Marc Joseph your mom is crap
no one else makes front mounts for 3000gts. limited parts to choose from and the kit is $700
Seventh