Brinsea Ovaeasy 190 and 380 - How to deal with a turning fault

This short video helps customers to recognise a turning fault on an Ovaeasy 190 or 380 Advance egg incubator. Very occasionally a user may find that the shelves in their machine do not seem to be turning fully. This may result in a 'turning fault' warning on the display. It applies to both series I and series II machines. The same principle also applies to an Ovaeasy 580
Please note that Brinsea does not recommend running a machine with the lid removed
The switch on an Ovaeasy can become corroded over time and may require replacement. There are 3 options.
1) Buy a replacement turning assembly kit/box, remove the existing turning assembly and replace with the new one. It will take about an hour. This is recommended if you have eggs in the machine
2) Remove the existing turning assembly and send it in to Brinsea for repair / replacement of the switch. This is recommended if it is not urgent and you are not necessarily a born mechanic/technician!
3) Remove the existing assembly, dismantle the assembly and replace the switch only. This is recommended if you have the time (about 2 hours), the tools and you feel confident with such things!
Part numbers as follows below. They apply to both Series I and Series II machines since the same new turning assembly part can be fitted to the older machines (even though the Series I fitted assembly you remove will be slightly different). Note there is a difference between UK and US parts due to voltage
UK :
Turning Assembly Ovaeasy 190 Advance 230V : part MJ023A
Turning Assembly Ovaeasy 380 Advance 230V : part MJ024A
Turning Assembly Ovaeasy 580 Advance 230V : part MJ021A
USA:
Turning Assembly Ovaeasy 190 Advance 115V : part MJ023C
Turning Assembly Ovaeasy 380 Advance 115V : part MJ024C
Turning Assembly Ovaeasy 580 Advance 115V : part MJ021C

[@BrinseaProductsLtd]

If you need help with one of our products the
best way to contact us is to do one of the following things:
- email: [e-mail]
- call us on 0345 226 0120 or [phone]
(Mon-Fri: 8:30am to 5:00pm UK time) - it would be helpful if you know the model of
your incubator and have the serial number available
Kind regards, Brinsea.

[@rojasqf]

tienen alguna tienda por peru

[@BrinseaProductsLtd]

Contamos con un distribuidor en Perú, por favor contáctelos para precios y más información:
Incubadoras del Peru S.A.C
Av. Portada del sol Nro 600
Zarate
San Juan de Lurigancho
Lima
Peru
Tel: [phone]
Mob: [phone]
www.incubadorasdelperu.com

[@ليثالحجاميليثالحجامي-ذ4خ]

Hello, I have a problem with the tipper motor, there is an annoying sound and then the tipper stops

[@BrinseaProductsLtd]

Can you please email [e-mail] and we will be able to help you. Could you make sure you include your serial number in your email. Thank you.

[@ليثالحجاميليثالحجامي-ذ4خ]

I sent it to you via e-mail

[@BrinseaProductsLtd]

@@ليثالحجاميليثالحجامي-ذ4خ Thank you. We are back at work on Monday and will reply as soon as we can.

[@ليثالحجاميليثالحجامي-ذ4خ]

brother thank you🌹

[@BrinseaProductsLtd]

You are welcome.