10.5-inch iPad Pro Rear-Facing Camera and Headphone Jack Repair - Fixez.com

iPad Pro 10.5" Repair Parts: bit.ly/2smL46b
iPad Pro DIY Repair Tools: bit.ly/2lzLIop
www.fixez.com presents the official iPad Pro 10.5" Rear-Facing Camera and Headphone Jack Repair Guide. Following the step-by-step, detailed instructions we have provided will help you safely replace a faulty iPad Pro rear camera or damaged 3.5 mm headphone jack. Visit Fixez.com for all of the DIY iPad Pro replacement screens, parts and tools you need to fix your tablet quickly, and affordably.
Subscribe to our RUclips Channel for additional DIY smartphone and tablet teardown and repair videos! / @fixez
Like us on Facebook: / fixez.com
Follow us on Twitter: / fixezdotcom
iPad Pro 10.5" Rear-Facing Camera and Headphone Jack Repair Guide Video steps:
Step 1
• Power down your 10.5-inch iPad Pro tablet.
Step 2 (iPad Pro 10.5 Display Assembly)
• The fully laminated 10.5-inch iPad Pro Oxide TFT “True Tone” display assembly is glued on solidly and is a tight fit within the rear case. Apply heat to soften the adhesive.
• Use the precision knife to create enough space to insert a triangle opening tool.
• Use triangle opening tools to slice thru the strong adhesive and carefully decouple the iPad Pro screen. Don't try to fully separate the display yet, as several fragile ribbon cables still connect it to the iPad’s logic board.
• Remove the following 2 Phillips screws securing the bracket that covers the display’s cables.
• With the bracket out of the way, detach the cables from the logic board and free the 10.5-inch iPad Pro display assembly.
Step 3 (iPad Pro 10.5 Rear-Facing Camera)
• Remove the following 10 Phillips screws.
• Extract the large shield covering the iPad logic board.
• Lift up the strips of padded conductive tape.
• Remove the following 6 Phillips screws.
• Use the spudger to muscle both loudspeaker chambers out of the rear case.
• Detach and pry up the impressive 12-megapixel iPad Pro rear camera that shoots 4K video at 30 fps (say complete words).
Step 4 (iPad Pro 10.5 Headphone Jack and Light Sensor Assembly)
• Remove the following 3 Phillips screws and then the bracket that covers the headphone jack.
• Remove the following Phillips screw.
• Peel up the piece of black tape.
• Release the ZIF connector and carefully slide out the cable.
• Easily extract the 10.5-inch iPad Pro headphone jack and light sensor assembly.
* To reassemble your device, follow the steps in reverse order.

[@wasabionalemon2721]

my tab s2 is broken , how can i get all files back?

[@milliyetciturkiye6649]

nokia 3310 pls