All one has to do is swap out those batteries for a premium & lager capacity one & as long as the motor doesn't die, you've got yourself a super budget clipper that rivals "higher ends" ones for a fraction of the price. Thanks Edo for this video.
Can you make a video putting different Blades on the Kemei 2373 like the madeshow Wedge Blade and check if they perform better which them? Seen a video but it was spanish…it seem he was satisfied with the madeshow blade.
@@edounboxingofficial I just did a sound test on the cordless masters and they have the same acoustic sound as the corded. Just a fraction of the speed. I'll tag u in a sound test on insta
No they didn't need motor mounts and extra washers that's more money and time, it's metal and they learned a lot form the mistake that S/C made so they still made a better unit then both of S/C in1/2 so they good to go.
@@TheHasan187 the question was, if you or me or anyone adds extra bushing/washers would it reduce vibration/noise, I own a pair of these and they are very aggressive for kids hair
I've done the same thing and you know they learned big time from the piece of junk S/C put out and made millions for a trash clipper. I saw when i took minds apart its still better then both of S/C units. VGR hit the market and is $15-$20 more just for the case and a exrta face plat. I think Kemei was smart by making just a nicewitch to me look better then all of them even S/C junk, and keeping it at a good price none of the other clipper are better far as motor wise all the same just more come for your buck, but if you have a creative mindset like I do and have more then 4 pair of Kemei 2373,🤦🏾♂️ you can make your own face plate belive it or not S/C is worried right now about this clipper. They need to put something new on the market to shift the tention of the Chinese market and their clipper. Even though they all are but its a new ball game. VGR is stepping up also. Kemei just putting out alot of units cause they got the money and what ever hits hit and what misses just miss. The care about quantity not quality and that part i dont get.
I got the Wmark Ng X1 it's amazing too so I agree with you about pricing and SC being trash I actually use Xergo and after using the WMark I've put the Gammas into the cupboard....
I just got one of these clippers and i tried to zero gap them but for some reason this blade shifts and wont stay when tightened. Anyone help me out please.
Same here…Check RUclips for instinct blade shifting video. There is a solution which might help. It says you must turn the lever washer around and screw it back on. For me it did not work so good. But I found in the comments that the problem is due to the bracket which is not tight which makes sense…someone advices to squeeze the bracket with pliers to tighten them.
@@stathisioannis The capacity on the batteries are not the best, should replace it to 3500mah Samsung battery or 3400mah Panasonic battery, the battery’s in the clippers are most of the time low capacity, some are 500mah but can be upto 2500mah
@@edounboxingofficialnot too bad in price, I’m in Uk and can get them for £7 for one piece and if you buy more then you can get them even cheaper. These are genuine but lots of fake batteries especially on Aliexpress. Is this 9v and how’s the performance ?
All one has to do is swap out those batteries for a premium & lager capacity one & as long as the motor doesn't die, you've got yourself a super budget clipper that rivals "higher ends" ones for a fraction of the price. Thanks Edo for this video.
What kind of battery would fit though
One of the reasons I came back to this video
Brother thanks for the video, you are the best at disassembling machines
Thnx bro
Can you make a video putting different Blades on the Kemei 2373 like the madeshow Wedge Blade and check if they perform better which them?
Seen a video but it was spanish…it seem he was satisfied with the madeshow blade.
How’s the comparison as far as size
Is it small like the stylecraft instincts?
Brother, a really nice video, would you say this machine is good for shaping the beard?
To think this is the motor that Andis needs to fix thier cordless masters clippers
Rotary motor is good too
@@edounboxingofficial I just did a sound test on the cordless masters and they have the same acoustic sound as the corded. Just a fraction of the speed. I'll tag u in a sound test on insta
do you think if you installed some rubber mounts/washers under the motor mounting screws it would make less vibration/noise?
No they didn't need motor mounts and extra washers that's more money and time, it's metal and they learned a lot form the mistake that S/C made so they still made a better unit then both of S/C in1/2 so they good to go.
@@TheHasan187 the question was, if you or me or anyone adds extra bushing/washers would it reduce vibration/noise, I own a pair of these and they are very aggressive for kids hair
With rubber under, it will reduce the vibration
what is the weight and noise db of that? that actually looks solidly built
Check my older videos
Does anyone know if there are any faceplates on the market that fit this clipper?
Is it possible to install the gamma stretch bracket on the Kemei 2373?
If this Kemie 2373 is the exact same as the Wmark NG X1 you can't. Check out the end of Edo’s video “Wmark NG X1 VS Stylecraft Instinct”
Hey Mr edu unboxing ..my request is Ng 9004 next full teardown thank you
What are good usb-c trimmers that fit stylecraft x-pro blades with no modifications?
Bro my kemei 2373 its damaged of the click lever and the raíl blsde What refurbished are compatible?
I've done the same thing and you know they learned big time from the piece of junk S/C put out and made millions for a trash clipper. I saw when i took minds apart its still better then both of S/C units. VGR hit the market and is $15-$20 more just for the case and a exrta face plat. I think Kemei was smart by making just a nicewitch to me look better then all of them even S/C junk, and keeping it at a good price none of the other clipper are better far as motor wise all the same just more come for your buck, but if you have a creative mindset like I do and have more then 4 pair of Kemei 2373,🤦🏾♂️ you can make your own face plate belive it or not S/C is worried right now about this clipper. They need to put something new on the market to shift the tention of the Chinese market and their clipper. Even though they all are but its a new ball game. VGR is stepping up also. Kemei just putting out alot of units cause they got the money and what ever hits hit and what misses just miss. The care about quantity not quality and that part i dont get.
I got the Wmark Ng X1 it's amazing too so I agree with you about pricing and SC being trash I actually use Xergo and after using the WMark I've put the Gammas into the cupboard....
Some people still don't understand that SC is overpriced
@@edounboxingofficial is there an equivalent to the instinct X that’s cheaper?
🔥🔥🔥
Should I get these or the wmark, or the vgr if I don’t care about the accessories and only want the clipper?
@@sunnyjohnlouis4843 get the Kemei they work great, put a Stylecraft blade on it and there a great all around clipper
These
I just got one of these clippers and i tried to zero gap them but for some reason this blade shifts and wont stay when tightened. Anyone help me out please.
Encontraste una solución amigo?
Same here…Check RUclips for instinct blade shifting video. There is a solution which might help. It says you must turn the lever washer around and screw it back on. For me it did not work so good. But I found in the comments that the problem is due to the bracket which is not tight which makes sense…someone advices to squeeze the bracket with pliers to tighten them.
Just tried it…squeezing the bracket is the solution 👍🏻
bro, please explain how vector motors work
Watch my older videos
This shit cuts better than my instincts and it makes me mad.
They actually do cut better than the instincts that’s a true fact
Indeed
Really?!?!?!? That's good news. Mines on the way. Was curious. Less than a wk.
Hey edo can u test something for me? Does the Vader “recharge” trimmer blade fit on the kemei 2299/supreme Vader
I don't have vader
First mod is change the battery on any clipper from china
They have excellent batteries, actually more reliable than most of the high end clippers out there
@@stathisioannis The capacity on the batteries are not the best, should replace it to 3500mah Samsung battery or 3400mah Panasonic battery, the battery’s in the clippers are most of the time low capacity, some are 500mah but can be upto 2500mah
Samsung batteries are expensive
@@edounboxingofficialnot too bad in price, I’m in Uk and can get them for £7 for one piece and if you buy more then you can get them even cheaper. These are genuine but lots of fake batteries especially on Aliexpress.
Is this 9v and how’s the performance ?
💈🔥🔥🔥🔥🔥🔥💈👍👍👍👍👍
Kemei was better than Waikil