[FYC] Wiper repair tool - Does it work?
HTML-код
- Опубликовано: 4 дек 2020
- Hi! In this video we'll test a tool intended for restoring your oil wipers. Let's see if it's any good.
If you wish to support the channel, you can follow the link and become a Patreon: www.patreon.com/user?u=26494467
Follow me here:
Facebook: / sergiu.gabor.youtube
Instagram: / sergiu.gabor
Twitter: / gabor_sergiu
Contact me at:
sergiu.gabor.yt@gmail.com 
Авто/Мото
2:09 mooor ahahahahahaha
Asa am zis si eu cand am luat prostia aia acum vreo 2-3 ani. Eram pe Autobahn si se pornise o ploaie grozava (aici in Nord e ca la englezi), numai ce iesisem din iarna si stergatoarele erau franjuri pe 5er, zic stai, ca am jucaria in torpedou. Exact acelasi căcat, si exact la fel reacția... doar că eu am mai rămas și ud leoarcă, și cu parbrizul necurățat.
Hi, I have the exact same thing.
Look at the side of the tool, it is not easy to spot, but the slots are numbered. Also, I like to put some soap and water on the wipers before cutting. If they are clean and more slippery, you get proper cuts and the wiper works like new. This goes for Bosch AeroTwin, haven't used this tool on other wipers yet. Still, at the end of the cut, I have to use some scissors to trim the last bit off.
PS: I really appreciate your content, especially regarding retrofit LEDs.
Greetings from Germany.
The tool works just fine, provided u use it correctly...
1 Use warm water to clean and soften the rubber
2. add a bit of liquid soap for lubrification
3. swipe it with a continous motion without stopping.
and you're done.
Spary some dry silicon on the blade b4 cutting, and DONT STOP YOUR CUT in the middle of a pull.
I have similar 'ecocut pro' tool (seems to be cheap copy on video) and it works fine if cut is done with one pull without stopping at middle.
Same here. It is important to do it one smooth wipe. Helps to clean it first and wipe it while wet. No streaks! Mine has markers which gap is what. On my car I noticed some noise though after cutting. So it wipes good only starts to make some noise.
nice video man. you said everything i wanted to hear. nice job
That was interesting, I was thinking buying one of this tool. Keep ongoing with your good work :D
Thank you Sergiu👍👍👍
Mulțumesc pt informație!!
That's great, thanks for showing me your video, I will buy new blades now, and will recycle the old ones at a recycling centre
Got the Ecocut, works perfect.
By the way, after watching your tests I started using car consumables that you point out to have good quality :D. Many thanks!
Thanks for testing this. Two alternatives (of very different prices) I know of are either to buy replacement rubbers for your blades or trying to find (usually online) silicone ones that are much more durable ;) Best regards.
Cel mai bun canal
Thank you for information
Thank you for warning regarding that trash tool :)
Never heard of such a tool. The priciple is ok but in practice, is hard to implement... Nice video!
Mi-a placut comentariul vocal de la test :)))))))))))))))))))))))
Nice work
Thank you
Bravo. Mersi
the trick is to perform the cut in a single motion. If you cut, stop, then cut again, it creates a uneven suface on the wipers which leads to streaking
he also did this and you can see where he stopped when he used them after they’d been cut hahahahaha
Mulțumesc Sergiu.chiar ma batea gandul sa imi cumpar inca o chinezarie...
On normal wipers it works like a good massage on a prosthetic foot. What I discovered is that it does better on blade wipers, don't ask me why, I know that I use that last time in 2017 iirc, I had an BMW E39 and normal wipers were costing something like 50EUR/pair (7er wipers).
That's when I decided to try some Bosch Blade because they were cheaper, after a failed attempt on rain with the normal wipers (yeah, I had the same reaction as you did), I ordered from ATU a pair of Bosch Blade wipers for the E39. After one year I decided to cut them instead of buying new ones. They worked again like new.....for about 3 months and then the rubber blade disintegrated. But hey, it's a win! Kind of...
Mulțumesc Sergiu pentru video clip, exact cum mi-a închipui, un produs prost. Dacă ai putea sa probezi și soluția de reparat fisurile în parbriz. Că se face mult tam, tam cu ea și este tot la fel de ieftină. Aștept cu nerăbdare video clipul.
:))))))))))) Bun filmulet!
We have produced wipers for more than 20 years and accepted customized packaging boxes and logos
Thanks for the video content. As it's a bit obvious this product is true false advertising, kudos for making an video that proves it, so less people would be actually fooled to buy it. I've got an side question but related to wipers - Do you recommend any cleaning on the wipers in terms of not fixing something that's already for replacement (squeakiness) but out of pure maintaince? I have been using wet wipes to clean mine here and there whenver I remember and I haven't noticed any significant wear or noise increase, but actual better performance over the blades, which it's very important on the rainy season :)
Cheers! Was about to buy this but glad I watched your vid before I did.!
thank you, you just saved me 22 € i'd pay for this garbage here in slovenia. best regards
Please teste the new Philips Ultinon 9000 leds... Continues your great job. Best regards.
Instead of trimming the rubber, I suggest trying to disassemble the wiper, replacing the wiper with blade refill that you can find online. By doing so, ideally it's guarantee to bring the most of the wipping performance back, even if you damage it during the changing process, then you should happily throw it away and get a new one, that's the way it's meant to be.
Salut Sergiu. Ai putea sa testezi si stergatoarele Alca cu strat de grafit , se gasesc in Dedeman si sunt mai ieftine
too good that not all your subscribers understand romanian :)
You have to cut it in one fluid motion, if you stop in the middle you WILL get streaks
Golf 4 Power!
thanks mate i was going to buy this junk now i wont thanks to you mate for saving me time and money...
Best word to describe the product: *Guano*
Am si eu acelasi produs dar , spre deosebire de tine, eu l-am folosit pe stergatoare de tipul celor fara rama. Eu pot spune ca si-a facut treaba cu brio pe acest tip de stergatoare . Intr-adevar, nu la fel sta treaba daca incerci o a doua restaurare/taietura . Nu a mai fost la fel de eficient ca prima data .
Totusi, la mine pot spune ca aproape a dublat viata stergatoarelor.
Salut.
Cumparat cam acelasi produs,dar este fabricat in Germania.Alta mancare de peste.Pretul a fost de 17 euro cu tot cu transport.Ai pe carcasa un indicator.1 si 2 ca sa sti cum si ce sa tai.
Nu vreau sa fac reclama ca nu am nici un interes dar încearcă produsul de la “aquapel”. Nu tine de stergatoare dar tot de vizibilitate și parbriz tine. Genial efect are și chiar un real ajutor pe ploaie și timp de noapte. Poate ajutam și alți conducători.
I used some sand paper on my dad's car and worked :)
Hey Please make The Scratch oil test ..with these Marks.... with cold Oil...Coldstart simulator,,wich oil ist good,..in -2 Grad celsius..??? very interesting.. test the v300 and mannol extreme and motul and the shitty castrol,..and Rowe High syntetic...pLEASE
yep. I bought one. Ruined my wiper. Worse than before - for all the reasons you pointed out.
Incearca si de la Baseus.
buy this tool is crazy , good idea is buy the wiper a new one
Am inteles ca e un ulei special pentru garnituri la uneltele pneumatice si ca ar da putina viata stergatoarelor care scartaie sau sar. Merge testat:)).
Foarte bune testele tale! Meriți 👍pentru efortul depus și pentru profesionalismul de care dai dovadă, dar pentru înjurături ți-am dat un 👎
Cred că se poate face conținut și fără înjurături, sau dacă mai scapi câte una, poți să-i dai bip.
Conținutul fără înjurături e acceptat de toți urmăritorii, dar cel cu înjurături deranjează pe unii dintre ei
...
No hate!!!
Succes în ceea ce faci!
Good job!
I would use in the USSR where the wipers were constant out of stock everywhere. But my tool landed in the garbage bin where it belongs.
was something in stock in USSR ? lol 😂
@@dimmacommunication Corruption
Am văzut că unii curăță ștergătoarele cu WD40 și merg mai bine. Poți face un test cu asta? Am încredere mai mare in metodele tale.
cel mai sigur e cu silicon lichid. rezista toata iarna si nu permite inghetul stergatoarelor ! o sa mi multumesti toata viata
Iti dau like doar pt injuraturi 😅
🤣Gunoi😂
Great test tho!
Dumniezau lor de chinezi!!!!! :)))))
Trash toll thanks for exposing this tool
Chucha, justo compré esa wea en aliexpress, creo q no sirve 😢
02:09 =)))
I wanna claim defective user, as if I could do better. Cutting rubber, I would recommend lubrication. Soap up the blade plenty first then do your test.
Tare de tot remarca legată de chinezi in timpul testului😂
I'm amazed that anyone could think this thing is a good idea.
Am auzit înjurătura aia pur românească 😅😅
Oricat de frumoasa poate sa fie o limba straina, tot in romana este placerea de a injura!
Chinezii si chinezariile lor
The german ones work, but are exensive. They actually cut a layer of rubber, not sand it.
why do you want God to damn it???
Chinese do fine stuff but...only for their own market.
For some other foreign markets, they do rubbish.
no need for profanity, but hey it's your karma
learn how to cut first, after make a video