Thank you for the feedback. I do have a Siemens PLC, but I wouldn't call myself an expert in it, so I stayed away from making videos on Siemens for now. I'll see if I can spend a bit more time with it in the future.
Vlad, I am having trouble adding 1794-AENT to RS linx. I am adding it in to a driver that has a Stratix 5700 which has VLANs set up on it. I have 2 PLC going into the Stratix, then I have the remote IO. I cannot get the AENT to populate in RS linx,however I can ping it. Have you ever set up AENT through a stratix? I am plugged into a switch that's connected through ethernet to the stratix. I know there's a lot going on here, I just thought maybe you could see it from a different perspective. I can make a driver with just the AENT, but when I add the stratix, it wont work.
With VLANs it can be tricky; your gateways must be setup to forward the traffic correctly. I've not done it over VLANs, but I did it over a NAT configuration through a Stratix. I would definitely expect it to work the way you're describing; I'd spend more time with the settings of the Stratix; I'm not certain why the traffic isn't going through. Sorry, I can't help you further.
@@SolisPLC I am thinking now I need to add the gateway for the AENT. The gateway is the IP of the Stratix. I remember now that I had to to into port configurations (on the PLCs) and set the gateway in order for the Stratix to see the PLCs. I think I will have to do the same for the AENT. So what you said did remind me that may be what's keeping the Stratix from seeing the AENT
Love that your covering Allen-Bradley
Thanks Vlad for uploading this amazing video. Please keep on driving the future tech
Thank you, I appreciate it.
Thank you for the knowledge! New sub
Thank you for sharing..
1:35 "without any further delays, let's get started... before we get started with today's video..." haha good one
hahaha, my bad.
Thankyou
👍👍
awesome and very helpful!! any chance of some siemens?
Thank you for the feedback. I do have a Siemens PLC, but I wouldn't call myself an expert in it, so I stayed away from making videos on Siemens for now. I'll see if I can spend a bit more time with it in the future.
Vlad, I am having trouble adding 1794-AENT to RS linx. I am adding it in to a driver that has a Stratix 5700 which has VLANs set up on it. I have 2 PLC going into the Stratix, then I have the remote IO. I cannot get the AENT to populate in RS linx,however I can ping it. Have you ever set up AENT through a stratix? I am plugged into a switch that's connected through ethernet to the stratix. I know there's a lot going on here, I just thought maybe you could see it from a different perspective. I can make a driver with just the AENT, but when I add the stratix, it wont work.
With VLANs it can be tricky; your gateways must be setup to forward the traffic correctly. I've not done it over VLANs, but I did it over a NAT configuration through a Stratix. I would definitely expect it to work the way you're describing; I'd spend more time with the settings of the Stratix; I'm not certain why the traffic isn't going through. Sorry, I can't help you further.
@@SolisPLC I am thinking now I need to add the gateway for the AENT. The gateway is the IP of the Stratix. I remember now that I had to to into port configurations (on the PLCs) and set the gateway in order for the Stratix to see the PLCs. I think I will have to do the same for the AENT. So what you said did remind me that may be what's keeping the Stratix from seeing the AENT
Hello, I was wondering why is the reason the IO output card is blinking red? thank you
Those specific modules detect that nothing is connected on the output side and blink red as a "minor fault".