Thank you so very much for explaining how all this works as I recently purchased the Flysky FS-i6X. I was confused as to how the battery was connected to this receiver as I was thinking of using it in the micro planes that I recently purchased but now I see it is actually connected to the ESC. I am only school and I am just getting back into the hobby after being absent for over twenty five years and boy has things changed since I use to fly. For example I used the old FM 36Mhz transmitters and receivers. Plus all my models were either scratch built or came in kits which you had to build yourself. Also there was no such thing as electric motors. They were all nitro or four stroke. My passion was building and flying Scale models from WWII. Pylon racing was also a blast. None the less thank you so very much again.
Nice to meet you...^.^ The receiver introduced in the video above can be used not only with coreless motors but also with brushless motors. Therefore, you can use an ESC (for brushless motors or coreless motors) suitable for the type of motor you want to use. To elaborate, the receiver can be used regardless of the type of motor. Therefore, depending on what type of motor you want to use, you can use an ESC suitable for that motor...^.^
Thank you so much for this. I could not get mine to bind for hours but then I saw this video explaining that after pressing the tx bind button and switching on the tx I then had to switch the tx off and then on again. This fooled me. I can now do it thanks to you. Pete
@@creativechannel9368 Thank you for taking time to reply. I think you have educated quite a few modellers. Brilliant vid. Thanks and happy flying Peter
Have you ever try waterproofing it? Im planning to make a mini boat And of course every electronics need to be waterproof. Looking forward for your answer
I know spray-type products for waterproofing electronic components are on sale, but I have not tried it myself. To be more precise, I haven't felt the need in particular yet. If you are planning to make 'Boat', the video below might be helpful...^.^ ruclips.net/video/q7-mOzXQUjk/видео.html ruclips.net/video/07r8ielacPY/видео.html
안녕하세요. 9g 서보 두개와 180 dc 모터를 fs2a 리시버와 1s lipo 배터리를 통해 구동하려고 하는데 전류 부족인지 서보 모터가 잘 작동하지 않습니다. 특히 dc 모터 작동중에는 서보 모터가 거의 움직이지 않습니다. 2s lipo 배터리로 변경 후 확인했을때는 잘 작동되는걸 봐서는 리시버나 모터들의 불량 같지는 않은데 혹시 같은 문제를 경험해보신적이 있으신가요?
네... 아마도 사용하신 1셀 배터리의 용량문제로 보입니다. (배터리의 용량이 부족하거나 충전이 덜 되었을 가능성이 있겠죠) 반드시 180 DC 모터를 사용해야만 하는 상황이시라면(만드시려는 기체의 크기나 추력을 고려했을대...), 용량이 충분한 2셀 배터리 사용을 추천드리고 싶네요...^.^
I noticed that you installed the esc connector to channel 3 during the binding process. Did you reconnect to channel 2 after completing the binding process?
In the video above, I never reconnected to channel 2 after binding was completed... I'm not sure what question you're asking. ESC was connected to channel 3 to check motor operation, and a servo was connected to channel 1 to test the operation of the servo...^.^
Yes, of course it can be used on drones as well. However, the above receiver has 4 channels. Therefore, it cannot be used on drones (this also applies to airplanes) that require other operations or functions of more than 4 channels...^.^
@@creativechannel9368 Wow you are the only person whom has replied to me with enough information, thank you so much, up till now everyone on retail platforms has informed me I cannot use it for a drone at all. I’m only building a 3inch drone as a starter for fpv and will literally only want to learn how to fly with it and get into the hobby, so I bought this receiver but I thought I was stuck with it as I’ve been told I cannot use it. It should be fine with what I intend for a 3inch build yeah? Thanks heaps. And your content is so informative 👍🏼
아닙니다... 위에 1번과 2번의 수신기는, 모양이 동일하지만 각각 적용(호환)되는 조종기의 타입이 다릅니다. FlySky 와 FrSky 는 서로 다르거든요. 본인이 보유하고 계시는 조종기에 적합한 수신기를 사용하시면 되고요... 납땜의 여부는, 여러번 구입을 해봤던 제 경험상... 아마도 대부분 납땜이 안되어 있는 상태로 판매가 되는 것으로 알고 있습니다. 그래도 혹시 모르니, 검색을 해보신다면 납땜이 되어 있는 제품을 찾으실수도 있겠죠?...^,^
Please refer as follows... there are 2 version... One is for FlySky Transmitter, another is for FrSky Transmitter... You can choice one of them...^.^ 1) For FlySky Version www.aliexpress.com/item/4000153209846.html?spm=a2g0o.productlist.0.0.418970caqvzOir&algo_pvid=e2850701-8066-44e3-a393-b09e4bac82a7&algo_expid=e2850701-8066-44e3-a393-b09e4bac82a7-0&btsid=0ab50f4415980585247021098edabc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ 2) For Frsky Version www.aliexpress.com/item/32884998553.html?spm=a2g0o.detail.1000014.11.5f0540f7vNwmNg&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.183346.0&scm_id=1007.13338.183346.0&scm-url=1007.13338.183346.0&pvid=726cecbb-5a87-48a9-82d5-878f32c91529&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.183346.0,pvid:726cecbb-5a87-48a9-82d5-878f32c91529,tpp_buckets:668%230%23131923%2349_668%23808%233772%23967_668%23888%233325%2317_3338%230%23183346%230_3338%233142%239890%239_668%232846%238109%23229_668%232717%237567%23941_668%231000022185%231000066059%230_668%233422%2315392%23328
Well...the most important thing is to make sure that each part is well connected. Take a look... There is a high probability that there was a very minor mistake somewhere...^.^
네... 위 영상에서는 브러쉬리스 모터를 사용했기에, 브러쉬리스 모터용 변속기(ESC : Electric Speed Controller)를 사용했기에 모터와 연결되는 선이 3가닥 입니다. 질문하신 코어리스모터(브러쉬드 모터)를 사용하시려면, 코어리스모터(브러쉬드 모터)용 변속기(ESC : Electric Speed Controller)를 구매하시면 됩니다. 당연히, 모터와 연결되는 선이 2가닥이죠. 아래에 샘플 한 종류(제품)를 링크시켜 놓았습니다. 참고가 되실 거예요...^.^ www.aliexpress.com/item/4000357111911.html?spm=a2g0o.productlist.0.0.48d52a53RA1AsP&algo_pvid=f87de550-13d1-4b13-8be5-e41e1265ae97&algo_expid=f87de550-13d1-4b13-8be5-e41e1265ae97-2&btsid=0bb0623916212625987658350eeca5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ 또한, 아래의 4:48~5:20 까지의 영상 또한 참고가 되실듯 하네요...^.^ ruclips.net/video/JD1OmI5VAp8/видео.html
5개 납땜해서리 2개 오작나고 3개 되네요..T.T 오작한개는 모터가 안돌고 다른 오작 한개는 채널이 한개 작동안하서 서보하나가 작동을 안합니다. 초반 2개가 납땜 팁이 뭉특해서 그런건지 가는팁 납땜기를 다시사서 하니 3개는 정상작동합니다. 근데 초반 불량2개를 다시 추가 납땝해도 오작 상태가 개선이 안되는데....제가 납땜을 잘 못해서 그런건지 리시버 제품 자체의 불량인지 아직도 의문입니다.. 암튼 싸게 구입해서 5개중 3개라도 정상 작동하니 다행입니다.
my receiver refuses to bind. I followed the procedure of the video! Are these receivers sometimes faulty? I waited 15 minutes but he doesn't want to connect ...
Please refer as follows... 1. Please check Receiver type as you know, there are two kinds... one is for FlySky Transmitter, another is for FrSky Transmitter. 2. Please check Protocal type There are two types... One is ‘AFHDS’- Old version, another is ‘AFHDS 2A’- New version. You must check and change menu(your transmitter) before bind... I've used about 20 so far, I never met a defective receiver...^.^
@@creativechannel9368 Flysky FS2A 4CH AFHDS 2A Mini Compatible Receiver PWM Output for Flysky i6 i6X Flysky FS2A 4CH AFHDS 2A Mini Compatible Receiver www.aliexpress.com/item/4000405304912.html?spm=a2g0s.9042311.0.0.15d46c37xCQiDn The AFHDS function is on "On" then I follow the instructions of the video but the transmitter emits "Beeps" and does not connect! I don't know what else to do ... 🤔🤔🤔
@@mekateknik3717 Oh, I see... In case, check whether the soldering is done correctly or not. Or, If you are testing with a new ESC, it may have something to do with your ESC settings as well...^.^
@@creativechannel9368I am stupid !!! I managed to "bind" the receiver ... I'll explain! I was waiting for a message from the transmitter "connection successful" ... We just have to turn the transmitter off and on for everything to be operational! I realized this by chance when switching off and on after trying to bind transmitter and receiver ... I'm happy, I'll be able to use my glider ... And refund Aliexpress since they refunded me!
Hello! cannot set failsafe mode on this receiver. on the remote it says that the engine is off, but in fact, when the connection is lost, it continues to work. how to run a spectacle model! do you have anything to say about this? FS2A 4CH AFHDS 2A
Hi... I've been using this receiver for a long time, but I don't know the exact solution, perhaps because I've never felt the need for the question you asked. Sorry for not being able to help you...^.^
@@creativechannel9368 I figured out what to do! failsafe on the console does not need to be configured. just set the desired position of the sticks and press the button on the FS2A 4CH receiver, the receiver will remember these positions and apply them when the connection is broken
The BEC I used in the video above was 12A. Of course, it will work even if you connect it to the Skywalker 20A bec 5v 2A product you inquired about. However, it should be noted that the weight will be slightly heavier. As you are well aware, in the case of a flying airplane, it is important to make it as light as possible...^.^
You can check Output signal(PWM) & Protocol(AFHDS 2A) before buy it. (Support : FS-I6\, FS-I6X\, FS-I6S\, FS-TM8\, FS-TM10\, FS-I10 and other AFHDS 2A protocol transmitter .) Please refer as follows... there are 2 version... One is for FlySky Transmitter, another is for FrSky Transmitter... You can choice one of them...^.^ 1) For FlySky Version www.aliexpress.com/item/4000153209846.html?spm=a2g0o.productlist.0.0.418970caqvzOir&algo_pvid=e2850701-8066-44e3-a393-b09e4bac82a7&algo_expid=e2850701-8066-44e3-a393-b09e4bac82a7-0&btsid=0ab50f4415980585247021098edabc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ 2) For Frsky Version www.aliexpress.com/item/32884998553.html?spm=a2g0o.detail.1000014.11.5f0540f7vNwmNg&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.183346.0&scm_id=1007.13338.183346.0&scm-url=1007.13338.183346.0&pvid=726cecbb-5a87-48a9-82d5-878f32c91529&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.183346.0,pvid:726cecbb-5a87-48a9-82d5-878f32c91529,tpp_buckets:668%230%23131923%2349_668%23808%233772%23967_668%23888%233325%2317_3338%230%23183346%230_3338%233142%239890%239_668%232846%238109%23229_668%232717%237567%23941_668%231000022185%231000066059%230_668%233422%2315392%23328 Please refer my previous video as follows...^.^ ruclips.net/video/CZprzS3GiNg/видео.html
Yes of course. Before purchasing, please check the version(module) and type(Flysky or FrSky)...^.^ * There are two version... One is for FlySky Transmitter, another is for FrSky Transmitter...^.^ 1. For FlySky Version www.aliexpress.com/item/40001... * For example, FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol transmitter 2. For Frsky Version www.aliexpress.com/item/32884... * Compatibility of Transmitters & Receivers www.youtube.com/watch?v=CZprz...
안녕하세요? DLG 이니, 모터는 없을테고요...서보의 구동을 위해서 필요하다는 말씀이시지요? 네... 말씀하신것처럼, 수신기의 한 채널을 선택해서(조향을 담당하지 않는 남는 채널), 직접 전원을 넣어주셔도 됩니다. (다만, 각 채널에 3개의 핀 중에서... 플러스와 마이너스를 잘 찾아내야겠죠?) 어차피, 모터가 없는 구조라면 변속기도 없을테니까요...^-^
Thank you so very much for explaining how all this works as I recently purchased the Flysky FS-i6X. I was confused as to how the battery was connected to this receiver as I was thinking of using it in the micro planes that I recently purchased but now I see it is actually connected to the ESC.
I am only school and I am just getting back into the hobby after being absent for over twenty five years and boy has things changed since I use to fly. For example I used the old FM 36Mhz transmitters and receivers. Plus all my models were either scratch built or came in kits which you had to build yourself. Also there was no such thing as electric motors. They were all nitro or four stroke. My passion was building and flying Scale models from WWII. Pylon racing was also a blast.
None the less thank you so very much again.
Hiya, on all rx now you to connect the esc to channel 3.
I'm really glad that my video was helpful. It's also a joy for me, and it's why I make videos. I hope you enjoy the fun RC hobby...^.^
@@creativechannel9368 thank you and of course I will enjoy getting back into it. Been a long time but I am so looking forward to it.
Excellent video, really helpful for what is quite a fiddly procedure. Many thanks.
Thank you Bro...^.^
hello,,is it necessary to use esc for coreless motors,,thank you
Nice to meet you...^.^
The receiver introduced in the video above can be used not only with coreless motors but also with brushless motors.
Therefore, you can use an ESC (for brushless motors or coreless motors) suitable for the type of motor you want to use.
To elaborate, the receiver can be used regardless of the type of motor.
Therefore, depending on what type of motor you want to use, you can use an ESC suitable for that motor...^.^
Thank you so much for this.
I could not get mine to bind for hours but then I saw this video explaining that after pressing the tx bind button and switching on the tx I then had to switch the tx off and then on again.
This fooled me.
I can now do it thanks to you.
Pete
Most 'failures' seem to arise from very minor problems.
I am so happy that my video has been of interest to you too.
Have a nice day....^.^
@@creativechannel9368
Thank you for taking time to reply.
I think you have educated quite a few modellers.
Brilliant vid.
Thanks and happy flying
Peter
Thank for this video
I'm glad it was helpful.
Have a nice day today...^.^
Thank you for this... want to start a mini project for my son, but am always lost with what electronics Tx Rx to get..
You're welcome...If it was helpful to you, I'm happy too...^.^
Thanks for the clear tutorial.. what brushless motor are you using in this video?
I tested it a while ago, so I can't remember exactly,
But, I think it was probably 1806-2400kv...^.^
Have you ever try waterproofing it?
Im planning to make a mini boat
And of course every electronics need to be waterproof.
Looking forward for your answer
I know spray-type products for waterproofing electronic components are on sale, but I have not tried it myself.
To be more precise, I haven't felt the need in particular yet.
If you are planning to make 'Boat', the video below might be helpful...^.^
ruclips.net/video/q7-mOzXQUjk/видео.html
ruclips.net/video/07r8ielacPY/видео.html
@@creativechannel9368 thank you @creative channel
This is superb helpful
안녕하세요.
9g 서보 두개와 180 dc 모터를 fs2a 리시버와 1s lipo 배터리를 통해 구동하려고 하는데 전류 부족인지 서보 모터가 잘 작동하지 않습니다.
특히 dc 모터 작동중에는 서보 모터가 거의 움직이지 않습니다.
2s lipo 배터리로 변경 후 확인했을때는 잘 작동되는걸 봐서는 리시버나 모터들의 불량 같지는 않은데 혹시 같은 문제를 경험해보신적이 있으신가요?
네... 아마도 사용하신 1셀 배터리의 용량문제로 보입니다. (배터리의 용량이 부족하거나 충전이 덜 되었을 가능성이 있겠죠)
반드시 180 DC 모터를 사용해야만 하는 상황이시라면(만드시려는 기체의 크기나 추력을 고려했을대...), 용량이 충분한 2셀 배터리 사용을 추천드리고 싶네요...^.^
@@creativechannel9368 네 2s 본 기체에는 배터리를 사용해야겠네요. 답변 감사드립니다.
I noticed that you installed the esc connector to channel 3 during the binding process. Did you reconnect to channel 2 after completing the binding process?
In the video above, I never reconnected to channel 2 after binding was completed... I'm not sure what question you're asking.
ESC was connected to channel 3 to check motor operation, and a servo was connected to channel 1 to test the operation of the servo...^.^
Thank you that was really helpful. I appreciate it and I subscribed
I'm glad my video was helpful to you too. I hope you have a happy day today...^.^
Hi there Great bud, can you tell me if this receiver will work for a drone build?
Yes, of course it can be used on drones as well.
However, the above receiver has 4 channels. Therefore, it cannot be used on drones (this also applies to airplanes) that require other operations or functions of more than 4 channels...^.^
@@creativechannel9368
Wow you are the only person whom has replied to me with enough information, thank you so much, up till now everyone on retail platforms has informed me I cannot use it for a drone at all. I’m only building a 3inch drone as a starter for fpv and will literally only want to learn how to fly with it and get into the hobby, so I bought this receiver but I thought I was stuck with it as I’ve been told I cannot use it. It should be fine with what I intend for a 3inch build yeah?
Thanks heaps. And your content is so informative 👍🏼
@@anthonypaladino2680
You're welcome. A 3-inch drone would be very cute.
I hope you create wonderful works. I will too...^.^
I learned something. 10x
Thanks...^-^
Hello, very nice. Thank you.
Thanks...^-^
덕분에 동영상 잘보고 있습니다. 2번은 1번사서 납땜하기 어려워하는 사람들이 2번을 구매하면 되는 건가요?
아닙니다... 위에 1번과 2번의 수신기는, 모양이 동일하지만 각각 적용(호환)되는 조종기의 타입이 다릅니다.
FlySky 와 FrSky 는 서로 다르거든요. 본인이 보유하고 계시는 조종기에 적합한 수신기를 사용하시면 되고요...
납땜의 여부는, 여러번 구입을 해봤던 제 경험상... 아마도 대부분 납땜이 안되어 있는 상태로 판매가 되는 것으로 알고 있습니다.
그래도 혹시 모르니, 검색을 해보신다면 납땜이 되어 있는 제품을 찾으실수도 있겠죠?...^,^
@@creativechannel9368 자세한 설명 감사합니다. 워낙 저주받은 손꾸락이라서 기자재 선정에 엄청 힘들어도 덕분에 많이 배웁니다^^
@@true21cwoo
천천히 해보시면, 그리 어렵지 않아요... 감사합니다...^-^
Thank you very much!))))
Will this flysky radio bind to the...
.....FRSKY. FR. 4ch. Micro receiver... Thanks
Please refer as follows... there are 2 version...
One is for FlySky Transmitter, another is for FrSky Transmitter...
You can choice one of them...^.^
1) For FlySky Version
www.aliexpress.com/item/4000153209846.html?spm=a2g0o.productlist.0.0.418970caqvzOir&algo_pvid=e2850701-8066-44e3-a393-b09e4bac82a7&algo_expid=e2850701-8066-44e3-a393-b09e4bac82a7-0&btsid=0ab50f4415980585247021098edabc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
2) For Frsky Version
www.aliexpress.com/item/32884998553.html?spm=a2g0o.detail.1000014.11.5f0540f7vNwmNg&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.183346.0&scm_id=1007.13338.183346.0&scm-url=1007.13338.183346.0&pvid=726cecbb-5a87-48a9-82d5-878f32c91529&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.183346.0,pvid:726cecbb-5a87-48a9-82d5-878f32c91529,tpp_buckets:668%230%23131923%2349_668%23808%233772%23967_668%23888%233325%2317_3338%230%23183346%230_3338%233142%239890%239_668%232846%238109%23229_668%232717%237567%23941_668%231000022185%231000066059%230_668%233422%2315392%23328
@@creativechannel9368 Thanks.. ✌
@@charlesmilbourn6861 You're welcome... have a nice weekend...^.^
This receiver need special esc pwm or we can use regular one esc?
You can use with any regular ESC...^-^
@@creativechannel9368 thanks for replying, I'm confused that's why I asked
@@jonujangid3J ...^-^
How about the range of this receiver...?
It was sufficient for use on the school yard or in a nearby park....^.^
I was able to bind it, but my servos act weird and sttuters all the time after a while, the motor does too. What ir can be?
Well...the most important thing is to make sure that each part is well connected.
Take a look... There is a high probability that there was a very minor mistake somewhere...^.^
영상 잘 보고 있습니다. 한가지 궁금한게 있는데, 코어리스모터에 연결하려면 선이 2개인데 어떻게 연결해야 하는가요?
네... 위 영상에서는 브러쉬리스 모터를 사용했기에, 브러쉬리스 모터용 변속기(ESC : Electric Speed Controller)를 사용했기에 모터와 연결되는 선이 3가닥 입니다.
질문하신 코어리스모터(브러쉬드 모터)를 사용하시려면, 코어리스모터(브러쉬드 모터)용 변속기(ESC : Electric Speed Controller)를 구매하시면 됩니다. 당연히, 모터와 연결되는 선이 2가닥이죠.
아래에 샘플 한 종류(제품)를 링크시켜 놓았습니다. 참고가 되실 거예요...^.^
www.aliexpress.com/item/4000357111911.html?spm=a2g0o.productlist.0.0.48d52a53RA1AsP&algo_pvid=f87de550-13d1-4b13-8be5-e41e1265ae97&algo_expid=f87de550-13d1-4b13-8be5-e41e1265ae97-2&btsid=0bb0623916212625987658350eeca5&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
또한, 아래의 4:48~5:20 까지의 영상 또한 참고가 되실듯 하네요...^.^
ruclips.net/video/JD1OmI5VAp8/видео.html
@@creativechannel9368 상세한 설명에 감사드립니다. 꾸벅^^
5개 납땜해서리 2개 오작나고 3개 되네요..T.T 오작한개는 모터가 안돌고 다른 오작 한개는 채널이 한개 작동안하서 서보하나가 작동을 안합니다.
초반 2개가 납땜 팁이 뭉특해서 그런건지 가는팁 납땜기를 다시사서 하니 3개는 정상작동합니다.
근데 초반 불량2개를 다시 추가 납땝해도 오작 상태가 개선이 안되는데....제가 납땜을 잘 못해서 그런건지 리시버 제품 자체의 불량인지 아직도
의문입니다.. 암튼 싸게 구입해서 5개중 3개라도 정상 작동하니 다행입니다.
그러시군요... 제품 불량보다는 아무래도, 납땜 불량일 확률이 큰 듯 하네요.
잘 점검해보시면, 다시 살릴수 있을 거예요... 암튼, 좋~은 작품 기대할께요....^-^
my receiver refuses to bind. I followed the procedure of the video!
Are these receivers sometimes faulty? I waited 15 minutes but he doesn't want to connect ...
Please refer as follows...
1. Please check Receiver type
as you know, there are two kinds...
one is for FlySky Transmitter, another is for FrSky Transmitter.
2. Please check Protocal type
There are two types...
One is ‘AFHDS’- Old version, another is ‘AFHDS 2A’- New version.
You must check and change menu(your transmitter) before bind...
I've used about 20 so far,
I never met a defective receiver...^.^
@@creativechannel9368 Flysky FS2A 4CH AFHDS 2A Mini Compatible Receiver PWM Output for Flysky i6 i6X Flysky FS2A 4CH AFHDS 2A Mini Compatible Receiver
www.aliexpress.com/item/4000405304912.html?spm=a2g0s.9042311.0.0.15d46c37xCQiDn
The AFHDS function is on "On" then I follow the instructions of the video but the transmitter emits "Beeps" and does not connect! I don't know what else to do ...
🤔🤔🤔
@@mekateknik3717 Oh, I see... In case, check whether the soldering is done correctly or not.
Or, If you are testing with a new ESC, it may have something to do with your ESC settings as well...^.^
@@creativechannel9368I am stupid !!! I managed to "bind" the receiver ... I'll explain!
I was waiting for a message from the transmitter "connection successful" ... We just have to turn the transmitter off and on for everything to be operational!
I realized this by chance when switching off and on after trying to bind transmitter and receiver ...
I'm happy, I'll be able to use my glider ...
And refund Aliexpress since they refunded me!
@@mekateknik3717
Good job... always have a fun flight...^.^
Hello! cannot set failsafe mode on this receiver. on the remote it says that the engine is off, but in fact, when the connection is lost, it continues to work. how to run a spectacle model! do you have anything to say about this? FS2A 4CH AFHDS 2A
Hi... I've been using this receiver for a long time, but I don't know the exact solution, perhaps because I've never felt the need for the question you asked.
Sorry for not being able to help you...^.^
@@creativechannel9368 I figured out what to do! failsafe on the console does not need to be configured. just set the desired position of the sticks and press the button on the FS2A 4CH receiver, the receiver will remember these positions and apply them when the connection is broken
@@АлександрКузнецов-ц9ъ There was such a function. I also get to learn something through this opportunity. Thank you...^.^
What is the bec current you use for this receiver? Will it work with Skywalker 20A bec? 5v 2A current..
The BEC I used in the video above was 12A. Of course, it will work even if you connect it to the Skywalker 20A bec 5v 2A product you inquired about.
However, it should be noted that the weight will be slightly heavier.
As you are well aware, in the case of a flying airplane, it is important to make it as light as possible...^.^
Can this receiver use with other brand transmitter????
You can check Output signal(PWM) & Protocol(AFHDS 2A) before buy it.
(Support : FS-I6\, FS-I6X\, FS-I6S\, FS-TM8\, FS-TM10\, FS-I10 and other AFHDS 2A protocol transmitter
.)
Please refer as follows... there are 2 version...
One is for FlySky Transmitter, another is for FrSky Transmitter...
You can choice one of them...^.^
1) For FlySky Version
www.aliexpress.com/item/4000153209846.html?spm=a2g0o.productlist.0.0.418970caqvzOir&algo_pvid=e2850701-8066-44e3-a393-b09e4bac82a7&algo_expid=e2850701-8066-44e3-a393-b09e4bac82a7-0&btsid=0ab50f4415980585247021098edabc&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
2) For Frsky Version
www.aliexpress.com/item/32884998553.html?spm=a2g0o.detail.1000014.11.5f0540f7vNwmNg&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.183346.0&scm_id=1007.13338.183346.0&scm-url=1007.13338.183346.0&pvid=726cecbb-5a87-48a9-82d5-878f32c91529&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.183346.0,pvid:726cecbb-5a87-48a9-82d5-878f32c91529,tpp_buckets:668%230%23131923%2349_668%23808%233772%23967_668%23888%233325%2317_3338%230%23183346%230_3338%233142%239890%239_668%232846%238109%23229_668%232717%237567%23941_668%231000022185%231000066059%230_668%233422%2315392%23328
Please refer my previous video as follows...^.^
ruclips.net/video/CZprzS3GiNg/видео.html
What Heat shrink size for this receiver?
I remember it was 12mm(diameter)...^.^
Is it possible to bind a FS2A receiver Flysky with a transmitter Turnigy 9x AFHDS 2A (witch also Flysky) ?
Yes of course. Before purchasing, please check the version(module) and type(Flysky or FrSky)...^.^
* There are two version...
One is for FlySky Transmitter, another is for FrSky Transmitter...^.^
1. For FlySky Version
www.aliexpress.com/item/40001...
* For example,
FS-I6, FS-I6X, FS-I6S, FS-TM8, FS-TM10, FS-I10 and other AFHDS 2A protocol transmitter
2. For Frsky Version
www.aliexpress.com/item/32884...
* Compatibility of Transmitters & Receivers
www.youtube.com/watch?v=CZprz...
Its no working with h king 9x
@@gasperbucinel I don't understand why because they are all two AFHDS 2A
Me too but i tryed but it does not work, I don't know where is issue
@@gasperbucinel Thanks, so I am not the only one who observes this problem ! if anyone knows the causes we are two interested people.
모터 사용하지 않는 DLG 글라이더에 FS2A 활용하려고 하는데. 마이크로 로지 2핀 1s Lipo 배터리를 어떻게 연결해야 할까요? fs2a 수신기에 배터리를 직접 연결해야 할까요? 꾸벅
안녕하세요?
DLG 이니, 모터는 없을테고요...서보의 구동을 위해서 필요하다는 말씀이시지요?
네... 말씀하신것처럼, 수신기의 한 채널을 선택해서(조향을 담당하지 않는 남는 채널), 직접 전원을 넣어주셔도 됩니다.
(다만, 각 채널에 3개의 핀 중에서... 플러스와 마이너스를 잘 찾아내야겠죠?)
어차피, 모터가 없는 구조라면 변속기도 없을테니까요...^-^
@@creativechannel9368 답변 감사합니다! 납땜의 벽을 제가 넘을 수 있을지 ㅎㅎ
@@승열오-h6m 충분히 가능하실거예요... "화이팅!"...^-^
Thank you very much!))))
You're welcome... have a nice day...^-^
@@creativechannel9368 have good day for you too)))