Money Saver: Wind Mitigation Upgrades
HTML-код
- Опубликовано: 18 июн 2021
- In this video I'll show you how you can save 37% to 60% on your homeowners insurance by knocking out some wind mitigation upgrades yourself. Get ready to crawl up in the attic because that's where we'll find the big bucks!
------------TOOLS-----------
Ridgid Palm Nailer - amzn.to/3wzPJ1D
------------SUPPLIES-----------
Simpson Strong-Tie H2.5AZ Clips - amzn.to/2THXRi0
Simspons 8d 1 1/2" Nails - amzn.to/3cS2NHS
------------LINKS-----------
Instagram - / thecraftsmanblog
Patreon - / thecraftsmanblog
Facebook - / craftsmanblog
Website - thecraftsmanblog.com
Store - thecraftsmanstore.com 
Хобби
But if your wall is not connected by strapping to your top plate, it doesn’t really help
Thank you for this video. I appreciate the thoroughness of even showing us the nails you used. 👍🏻
THANK GOD I FINALLY FOUND THE VIDEO IM LOOKING FOR 🙌 🙏 😂
Great advice, I’ll be implementing this in our summer home along the gulf coast next weekend
Results?
thank you best video on clips, great job!!
Great and important video, thanks.
Thank you for your advice
Good advice bro.
Great tips
Great tip for a big discount! 11 pm is more like it, lol
You live near me. How you could even think about being in an attic is beyond me. I almost have a heatstroke walking the dog!
good advice.. thanks!
Nice job
Beautiful
Good video... I'm going to use these on the roof of my deck that has a metal roof
thank you!
Wonderful
Very good
You being from Florida. Can you use a screw. To install the tie downs. Please let me know. 😊
Thank's
wow didnt know you could do anything like this thanks for the tip! Sucks i have blow insulation so will have to wear a suit
Same here and my attic is all of maybe 2 feet tall. I read that you can do this from the outside through removing the soffit vents. I need to get this done asap.
Super helpful information about the insurance programs -- thank you! Our house (built in 1907) has extremely similar construction, including the original roof decking. Anything in particular I should be worried about considering the age of the rafters and ceiling joists (which are all true 2x4s)?
This shows the rafters being connected to the top plate. But the top plate should also be tied to the framing below it by more than 100 year old nails. My preference is Simpson SDWC structural screws. The catalog (and website) shows a number of orientations/applications and the relative strengths. They are often stronger than the hurricane clips (which I also often use where they fit)
Nice
vary nice
Great
How do we know which straps to buy? the kind in the video or the kind that wrap around the rafter? Thank you !!!
I know this is a older video but just wondering how do you vent your attic? I have the same aged attic and looks exactly like yours but im not sure how i should vent it since it has no vents just two gabe windows and gets so hot. I was thinking of putting a powered attic fan
Built in 1918, must be pretty good construction since it has survived without any of these hurricane clips. That means for 100 yrs it was fine as it was. I think this house may not survive a cat5 hurricane though! regardless of these clips, some other part of the house will fail, like windows, the house gets pressurized from winds close to 200mph and it explodes.
Good
nice
I wish I could do this! Due to the tight space between the top plate and the rafter at my house, it is literally impossible to do the job. I'd guess this upgrade could only be done when the houses are being built in most cases. Great to know what this kind of Wind Mitigation upgrade is as I was wondering why I did not receive any discount on my homeowner's insurance even after having a new roof.
That is the case with a lot of homes. Always fortunate if you can access the framing, but not always the case.
Just a thought: You may be able to use Simpson truss screws either from the exterior by removing the top most piece of cladding. If you have drywall, you may be able to cut a small strip, horizontally to gain access to the top plates to use the screws. Check this out: seagrant.soest.hawaii.edu/wp-content/uploads/2018/06/Structural-Screw-Installation-and-Testing-June-2018.pdf
Vary good
good
is there a way to do it with single wraps?
I wish it would save me 40-50% off on my HOI. I am only being quoted 20% off with the clips vs toe nails in central Florida.
Grate
Very good 👍
❤️❤️❤️
DO I HAVE TO DO BOTH SIDES OF THE RAFTER
No crawl space on my flat roof, how do I review the roof inside?
In the last 100 years Florida has seen about 80 hurricanes and about 20 in Central Florida and yet the 100 year old home has survived. I think the extra strap is a never ending money maker for insurance companies
Brain dead comment, takes one hurricane to blow it all away just hasn't come yet or hard enough for those houses. Also tons of engineering behind them.
You're right...big hurricane strap always has their hands in our pockets. You need to do anything......you're house has proved itself hurricane proof
Wow
Hi! I need help with this. I’m in central florida myself, in Orlando! I’m wondering if you would be interested in adding just the 3rd nail. (In my wind mit it shows has 1-2) need it badly due to hefty hike in HO insurance. I’d love it learn from you as well as compensate you for this job. Lmk!!
3rd nail will bring you up too Connection category B ... There's diffrent levels of connections. Also you only need to do areas the inspector can see
not everybody have a top plate. my roof is on top of another flat roof carport. the posts isn't even anchor down into concrete and its rely on gravity. the beams isn't even anchor in another but there for support of cross breams. and its from 60's and went through countless of storms and hurricanes. then all the sudden new regulation says old houses needed this and that. and most old home in FL roof pitch is 2-4/12. while the pitch in this dude video is like 12/12 which is high and have a lot of attic space and access vs others who have none or have to remove everything on top of the roof to get to it. so its not just "easy installation to save money"
Why not use wood screws to attach the brackets Sir ???
There's a reason screws aren't used in Framing. They don't have the lateral strength that nails do.
Cost is the reason not used, then the time factor. The lateral strength has nothing to do with it, PERIOD !!! Screws do not work there way out of the wood. nails do that all the time. Peace !!@@jefftee448
Nic
Are the 1 1/2 nail up to code
Yes, they are the minimum required nails with this clip for my state.
wood screws are stronger and better for this application
How bout 4 - 6 am, bet time to be in your attic.
he will still be up there at 4...11p is the starting time....hydrate
Osm
Op
Joss
Hm
Goid
Woq
Save your roof from my Angry winds #fema #roofers
Nc
Man, be careful with those nails behind your head.
Great tips
Beautiful
Wonderful
Very good
Nice
Great
nice
Good
good
Wow
Osm
Joss
Great tips
Beautiful
Very good
Great
Good
Good
Wow
Wow
Wow
Wow