I'm in US and want to compliment you on the way you do your content. Well done and well presented. I have a 2020 Ford Ranger XLT Super Crew FX4 off road. It's a great truck and I've done a lot of mods but always looking for more. My tail lights (not the entry level) don't fit like the ones you show nor does the plug in (just one plug and play to the unit). Do you have a vid for the 2020? I've discovered the 2020 is a bit different than other mods when you go for after market's. Let me know. Again, this is a well produced content.
Got the dark smoked v1. They oook amazing and next day delivery. Unfortunately one came in with a chip so waiting on yourselves getting back to me about replacements. Overall very happy with everything and will be looking for more items 😁
powerfulukltd all sorted. Customer service were amazingly quick at replying and arranging a replacement as we speak. Due tomorrow. I can highly recommend powerfulUK for quality AND service thanks.
surely the drivers side reverse light on LED is wired to the fog light switch through factory loom. Why not colour the inside of the lens red?? or pop out the reversing light and cover with red clear wrap
Can you replace the bulbs on the RLF083 v2? My left break light started flickering and i cannot figure out how open the housing without potentially breaking it...
Hi - We sell several lights and call them all RFL083 but have some RLF083-LED etc ! If its the sealed LED type this can be a problem ! Did you buy them from us ? we may need to replace your unit.
Having previously installed the V2 units on my Ranger, I eventually switched back to the original factory units as these upgraded LED units might look good but are nothing more than cheap Chinese rubbish. After around 12 months a component will fail within each unit at roughly the same time which then sends power from the brake lights down the lighting circuit. This causes the front side lights to flash every time the foot brake is pressed. The indicators will also start to fail led by led at around the same time. Added to that, nobody can actually see your brake lights or indicators in bright sunlight as the output is completely insufficient and probably illegal. Would be great if Ford made some upgraded LED units for the Ranger but unfortunately they don't.
JPIW I beg to differ. These last as long as they are fitted properly and looked after. There obviously an underlying fault on your vehicle. As for brightness in daylight my brake lights can be seen very clearly
@@Mark_B544 I look forward to you returning to your post at some time in the future to give us an update. I am in the fortunate position of having experienced these units working fine for around a year before they both then failed internally from nothing other than cheap Chinese components. As they are a sealed unit, the only looking after which you can apply in order to try and keep them working for longer is to not install them in the first place. As far as the brightness is concerned, I would be very interested to know how many vehicles have failed an annual road worthiness test or been pulled by the cops for insufficient light being emitted from these units.
I'm in US and want to compliment you on the way you do your content. Well done and well presented. I have a 2020 Ford Ranger XLT Super Crew FX4 off road. It's a great truck and I've done a lot of mods but always looking for more.
My tail lights (not the entry level) don't fit like the ones you show nor does the plug in (just one plug and play to the unit). Do you have a vid for the 2020? I've discovered the 2020 is a bit different than other mods when you go for after market's.
Let me know.
Again, this is a well produced content.
Would love a night comparison on these vids especially night time reverse light
Love the V3 looks funky
Got the dark smoked v1. They oook amazing and next day delivery.
Unfortunately one came in with a chip so waiting on yourselves getting back to me about replacements.
Overall very happy with everything and will be looking for more items 😁
Sorry for late reply - did you contact our customer support and get this resolved ?
powerfulukltd all sorted. Customer service were amazingly quick at replying and arranging a replacement as we speak. Due tomorrow. I can highly recommend powerfulUK for quality AND service thanks.
@@Mark_B544 hello! Can you update me with your lights? Are they still working fine with your ranger now?
hi are they still working fine nowadays?
Brilliant video lads
hello there, just wondering what colour cables are the version 3 brake lights? trying to tape in the cables to connect the canopy brake light
good job! btw, where is the fog light video, chaps?
Is it just v1 where you need to add a fog light, I would prefer to have the symmetry on them all and add a fog.
The best comparison video so far~! Cheers~!
surely the drivers side reverse light on LED is wired to the fog light switch through factory loom. Why not colour the inside of the lens red?? or pop out the reversing light and cover with red clear wrap
Can you replace the bulbs on the RLF083 v2? My left break light started flickering and i cannot figure out how open the housing without potentially breaking it...
Hi - We sell several lights and call them all RFL083 but have some RLF083-LED etc !
If its the sealed LED type this can be a problem !
Did you buy them from us ? we may need to replace your unit.
Hi, does the V3 (the last one) have fog lights? Thx!
I wonder if this is compatible with ford's BCM
Love your videos.
are there available with fog light function?
Is the v3 road legal in the uk
Having previously installed the V2 units on my Ranger, I eventually switched back to the original factory units as these upgraded LED units might look good but are nothing more than cheap Chinese rubbish. After around 12 months a component will fail within each unit at roughly the same time which then sends power from the brake lights down the lighting circuit. This causes the front side lights to flash every time the foot brake is pressed. The indicators will also start to fail led by led at around the same time. Added to that, nobody can actually see your brake lights or indicators in bright sunlight as the output is completely insufficient and probably illegal. Would be great if Ford made some upgraded LED units for the Ranger but unfortunately they don't.
JPIW I beg to differ. These last as long as they are fitted properly and looked after. There obviously an underlying fault on your vehicle. As for brightness in daylight my brake lights can be seen very clearly
@@Mark_B544 I look forward to you returning to your post at some time in the future to give us an update. I am in the fortunate position of having experienced these units working fine for around a year before they both then failed internally from nothing other than cheap Chinese components. As they are a sealed unit, the only looking after which you can apply in order to try and keep them working for longer is to not install them in the first place. As far as the brightness is concerned, I would be very interested to know how many vehicles have failed an annual road worthiness test or been pulled by the cops for insufficient light being emitted from these units.
Have just installed v3 after having a crack in the oem. Will update how they hold up.
@@danielcoetzee any updates? Working fine so far? Looking to get the v1