I can already tell this is going to be a good one. Air compressor restorations are my favorite. Looking forward to part 2. BTW I love how in your videos you can hear the birds outside. Keep up the good work. And happy birthday.
...а я думал, что будешь востанавливать сломанное ребро на головке цилиндров, осталось только приобрести рессивер и двигатель для полного восстановления компрессора, тем не менее- молодец, всё правильно сделал, хорошо покрасил,думаю, что полностью доведёшь до ума!!!
I was surprised you powder coated the flywheel, but painted the casing. Powder coating the caseas well would make it look great years longer. Thumbs Up!
This is just a suggestion as someone who watched a lot of different types of restoration channels, but take it with a grain of salt: I think you shouldn’t break up videos into 2+ parts unless it’s a major project, and you should speed up the videos just a TINY bit, as it feels you’re going a little slow (but that could jsut be me ¯\_(ツ)_/¯ ). The reason I say this is because if people see your video is recommended, and there are multiple parts, but they all haven’t been released yet, people are less likely to click on the video or watch longer. I feel most people watch it to see the end transformation from old to restored, so to see something partially restored, and then have the video and is like pseudo blue balls, if that mss makes sense. I really enjoy your channel, the attention to detail reminds me alot of my mechanics (king of general restoration), so I really enjoy this
I hear what you are saying, it would have been one video, but I am waiting on some parts and I took a day or 2 to myself since it was my bday, and you know the youtube algorithm likes to dump you in the bin if you don't upload. So now its a 2 part video.
Hello, I have the same air compressor with motor 1,5 kw and 50 liters reseiver. Maybe you know how many litres per minute makes this compressor head? My compressor takes 4 minute to make 9 at. Its not too long?
I was curious. What is the cleaner that you use in the bowl with the brush? Depending on the item I use brake clean, acetone or carburetor cleaner in an ultrasonic unit.
@@AJRestoration Omg, where do you buy gasoline in SA? I only find petrol here.. (j/k). I buy a stuff called Prepsol, and Mr Muscles Kitchen Cleaner, and it might be a kitchen cleaner but I have never seen anything get rid of oil and grease like Mr Muscles, it even gets rid of that sticky baked on oil inside valve covers and sumps.
@@AJRestoration Hi. Could it be some old Hammeritestuff? I`m asking because I hate a lot of this new paintshitstuff they sell today. They have removed this old good stuff from a lot of things in these days. Thanks for Your good videos.
Question. Im looking at a used 80 Gallon CH air compressor with a tf061903av pump. The oil in the pump looks good. The electric motor is being rebuilt as they over greased the bearings, so I cant run it to ensure it works. When I spin the pump I can hear it compressing air but then I hear air either coming out/in of the oil plug vent which is almost a pvc valve. is this normal?
Dagsê AJ. ek is n bejaarde ou man van Durban ek hoe baie van jou manier van werk . Dit laat my dink aan my self ek werk amper net soos jy. Hoop jy het lekker verjaar en was baie bederf. Kan nie wag vir die kompressor nie . Mooi middag vir jou
Baie dankie! ek hoop ek kry die ding weer om mooi te werk! Parte is skaars. Ek moes maar my eie bier koop en koek hahahaha. Maar dit was baie lekker dankie!
.ii.lke the touch you are using is it a propane style and where can find One of those see you later young man 😎 when you get done with this air compressor reverberation job
May I ask why you put the screw driver in the middle of the puller. I'm not second guessing I seriously want yo know 😁. Great job as always. Happy belated birthday.
@@AJRestoration The reason I asked what the background noise was is because I couldn't identify it. Now I know its rain . Theres a difference between an honest question and a sarcastic question?
Bravo, 👷♂️ very interesting and informative video "Innovation is not born of a dream, 💡 Innovation is born of struggle. ”🤠 I hope you will enjoy my videos too👍💐🛠
![Old Air Compressor Restoration [Part 2 of 2]](http://i.ytimg.com/vi/c4_ZUYBuYMA/mqdefault.jpg)
![Old Air Compressor Restoration [Part 2 of 2]](/img/tr.png)
A restoration and a little asmr i love too!
Cool project! The rain sound is pleasant too.
i love it too outside rain and inside restore
I can already tell this is going to be a good one. Air compressor restorations are my favorite. Looking forward to part 2. BTW I love how in your videos you can hear the birds outside. Keep up the good work. And happy birthday.
Thank you Randy!
٩٩
Nice! Love air compressors. Every house should have one.
Definitely!
Excellent video,Love hearing the rain!
...а я думал, что будешь востанавливать сломанное ребро на головке цилиндров, осталось только приобрести рессивер и двигатель для полного восстановления компрессора, тем не менее- молодец, всё правильно сделал, хорошо покрасил,думаю, что полностью доведёшь до ума!!!
Happy birthday to you Happy birthday to you Happy birthday dear restorer Happy birthday to you
Next time use the Lazer technology in stripping old paint I think it would be highly effective
Rainy Day Restoration
Love hearing the rain👌 awesome work as always 👊
Glad you enjoy it!
That's rain ?
I really enjoy your various restorations. Look forward to Part 2.
Many thanks!
Happy Birthday. I love 2 parts....the little machines are so interesting.
Thank you 🤗
good video
I was surprised you powder coated the flywheel, but painted the casing. Powder coating the caseas well would make it look great years longer. Thumbs Up!
powdercoating the casting would cause it to overheat.
This is the huge wheel 🛞🛞🛞🛞
Late, but hopefully not too late: Happy B-Day! 🥂🎂
Never too late hahaha
Nice Project looks great. I am re doing a Bendix Westinghouse buss compressor. haven't found any replacement pistons yet
Good luck! These parts are unobtanium.
Great video as always
Glad you enjoyed Michael!
Good morning from Southeast South Dakota
Hear the rain. WOW....... We got half inch of snow yesterday.
Good day buddy!
Looks like a great project, look forward to the finish. Hopefully you had a great birthday.
I did, thank you!!
Happy Birthday!
Great job so far 👍
Thank you so much!
Valeu AJ! Até o próximo vídeo! Fico no aguardo da continuação. Abraço
Nice video and Happy Birthday!
Thanks a lot 😊
happy birthday
Interesting project. 👍
Excellent video my dear friend!😊👍18
HAPPY BIRTHDAY 🥳 Loved the pull down and clean up. Can't wait for the next part 👍 great job
Happy Birthday =]
It looks great and you did a wonderful job restoring it as well!!!!
Enjoyed the video and I gave it a Thumbs Up
Thank you very much!I appreciate it!
@@AJRestoration You are very welcome!!
This is just a suggestion as someone who watched a lot of different types of restoration channels, but take it with a grain of salt: I think you shouldn’t break up videos into 2+ parts unless it’s a major project, and you should speed up the videos just a TINY bit, as it feels you’re going a little slow (but that could jsut be me ¯\_(ツ)_/¯ ). The reason I say this is because if people see your video is recommended, and there are multiple parts, but they all haven’t been released yet, people are less likely to click on the video or watch longer. I feel most people watch it to see the end transformation from old to restored, so to see something partially restored, and then have the video and is like pseudo blue balls, if that mss makes sense. I really enjoy your channel, the attention to detail reminds me alot of my mechanics (king of general restoration), so I really enjoy this
I hear what you are saying, it would have been one video, but I am waiting on some parts and I took a day or 2 to myself since it was my bday, and you know the youtube algorithm likes to dump you in the bin if you don't upload. So now its a 2 part video.
@@AJRestoration Veels Geluk :D :D
@@AJRestoration ohhhh okay, that makes more sense now. So you’re trying to make it a regular schedule or uploadss?
happy bday
Hello, I have the same air compressor with motor 1,5 kw and 50 liters reseiver. Maybe you know how many litres per minute makes this compressor head? My compressor takes 4 minute to make 9 at. Its not too long?
Great job ...Please what product to degrease the parts ?
Gasoline/petrol.
@@AJRestoration Many thanks.. 👍
I was curious. What is the cleaner that you use in the bowl with the brush? Depending on the item I use brake clean, acetone or carburetor cleaner in an ultrasonic unit.
I use gasoline.
@@AJRestoration Omg, where do you buy gasoline in SA? I only find petrol here.. (j/k). I buy a stuff called Prepsol, and Mr Muscles Kitchen Cleaner, and it might be a kitchen cleaner but I have never seen anything get rid of oil and grease like Mr Muscles, it even gets rid of that sticky baked on oil inside valve covers and sumps.
@@RachaelSA I am from Argentina. Some mechanics here use Mr Muscle degreaser (also for kitchens). Works like a dream!
can you stop flame torch, very noise
Honey have you seen my coffee pot?
I have a frigidaire 76L544 air compressor, but lacks the motor and need help locating said motor.
I don't have tools or skills to improvise.
What is the paint that struggled so hard with sandblast and paint stripper? We all need to know.
I have no idea, but damn that was some tough paint!
@@AJRestoration Hi. Could it be some old Hammeritestuff? I`m asking because I hate a lot of this new paintshitstuff they sell today. They have removed this old good stuff from a lot of things in these days. Thanks for Your good videos.
Question. Im looking at a used 80 Gallon CH air compressor with a tf061903av pump. The oil in the pump looks good. The electric motor is being rebuilt as they over greased the bearings, so I cant run it to ensure it works. When I spin the pump I can hear it compressing air but then I hear air either coming out/in of the oil plug vent which is almost a pvc valve. is this normal?
estou fazendo a restauraçao de um compressor antigo da marca strapsa so nao tenho os dados tecnicos alguem poderia me informar.
Happy birthday lol
Dagsê AJ. ek is n bejaarde ou man van Durban ek hoe baie van jou manier van werk . Dit laat my dink aan my self ek werk amper net soos jy. Hoop jy het lekker verjaar en was baie bederf. Kan nie wag vir die kompressor nie . Mooi middag vir jou
Baie dankie! ek hoop ek kry die ding weer om mooi te werk! Parte is skaars. Ek moes maar my eie bier koop en koek hahahaha. Maar dit was baie lekker dankie!
Top de mais parabéns irmão
.ii.lke the touch you are using is it a propane style and where can find One of those see you later young man 😎 when you get done with this air compressor reverberation job
It is propane indeed, you can find it in any hardware store. They come in all shapes and sizes.
@@AJRestoration thanks for your help with this matter young man 😎
Why don’t you use an impact
Do you have a pet bird in the workshop? We can hear it singing in the background. Will you show it to us sometime?
Hi helen you should wait till he answers one questin before askingthe 2nd
Its just the birds in the background, I don't keep pet birds I think it's cruel to keep them caged.
@@AJRestoration That's good. The birds are obviously very cheerful where you are😊
Awesome job 👍👌 I love your videos 🤠🤠 also where did you get that torch at
I got mine at a yard sale.Thank you so much 😊
8:50 Is it the way you make coffee in South Africa ?
🤣🤣🤢
Yes indeed that is true! hahaha
You do amazing work! Where are you located?
Thank you! 😁 I am in South Africa.
Hallo,guter Freund,wieder ein interessantes Video von mir,ich bin sehr glücklich und freue mich auf den zweiten Teil.👍💯💯💯
What kind is it?
Muito bom !
May I ask why you put the screw driver in the middle of the puller. I'm not second guessing I seriously want yo know 😁. Great job as always. Happy belated birthday.
It gives me better grip ont the puller. Sometimes the puller needs to be held firm.
Так все ничего, но нехватает перфекционизма, лоска.
Can you tell me what model it is
I sadly have no idea what model it is, sorry.
❤
Hi AJ bly om weer iets van jou te sien wag vir die kompressor om klaar te maak
Ek begin more met die head, ek hoop hy kom ook so nice uit!
@@AJRestoration Can you tell me what model it is???
Thanks
что за шум
Jissie. Amper vlieg daai puller by die deur uit.🤣🤣🤣🤣🤣
Amper amper hahahaha
Do you live in a rainforest lol?
I wish hahahaha
Whats with all the back ground noise 😖🤔
It is what it is hahaha, I can`t control it.
@@AJRestoration The reason I asked what the background noise was is because I couldn't identify it. Now I know its rain . Theres a difference between an honest question and a sarcastic question?
Bravo, 👷♂️ very interesting and informative video "Innovation is not born of a dream, 💡
Innovation is born of struggle. ”🤠 I hope you will enjoy my videos too👍💐🛠
Thank you very much!
Хотя, местамми ништяк.
Muy lento mucho misterio
я надоело пока удалить почему другой
Sorry but that was lunk job.
Lunk?
Nice work 👌👌👌👌👌👌
Like for sure 🤝🤝🤝
Happy birthday!