Great, great video. I have a 2014 F-250 with stock turbo GT32 and I'll do exactly the same. Only one question. What to do with CCV sensor?. Will I have a code if I leave it disconnected?
I have an 11, in interested in doing a piping kit just like this. Currently running stock turbo with 153k miles on it. My question is: if I do this piping kit now and later upgrade my turbo will everything else but the dual intake pipe be compatible with a 15+ turbo?
I know you like that company but if you went with Pusher Intakes you wouldn't have had to do any of that modification. Their fit and finish is second to none
@@devonsarkinen3165 that’s probably because most people would do the retrofit upgrade. These trucks are going on 10+ years old. If they still have that turbo it probably won’t last much longer depending on mileage etc.
I'm not real smart about these things. What did you gain? and Is the smog stuff still intact. I have a 2013 F350 would love to improve it, and still stay legal. 139,000 miles . Live in Washington.
Are you friends with SPE? I can’t get them to send the parts I ordered and get the runaround from customer service. Love the parts I have but currently on a 1.5month wait for stuff that was sold to me in stock…..
God Bless You all. All Glory to God! Repent and live for God. Romans 10:9 “if you declare with your mouth that Jesus is Lord and believe in your heart that God rose Him from the dead you will be saved.”
Didn't realize you had to trim the upper snout of the charger for this kit. Good thing to know.
What about the throttle body? From the front intake?
I want to know what exhaust tip that is.
Great, great video. I have a 2014 F-250 with stock turbo GT32 and I'll do exactly the same. Only one question. What to do with CCV sensor?. Will I have a code if I leave it disconnected?
What is your tire size and set up
I have an 11, in interested in doing a piping kit just like this. Currently running stock turbo with 153k miles on it. My question is: if I do this piping kit now and later upgrade my turbo will everything else but the dual intake pipe be compatible with a 15+ turbo?
Center seal in turbo is a gone my 11 did the same thing
time for a bigger turbski
Seems like it would have been easier to cut down the plastic piece and favor the plastic side with the coupler at install 🤔
Wouldn’t trimming it send shrapnel to the turbo inlet ?
does the turbo inlet have to be trimmed because its to long and hits bottom of the new intake manilfold ?
Why didn’t you upgrade the radiator hose?
Top Corey if u ever upgrade to a new turbo can I buy the dual intake tube Dan want sell me that separately from a kit
Who do you have to know to get those snazzy egr test plates?
I know you like that company but if you went with Pusher Intakes you wouldn't have had to do any of that modification. Their fit and finish is second to none
Agreed. Fuckkkkkk cutting off part of the turbo. That isn’t what I’d call bolt on by any means.
Pusher doesn’t have piping kit for 11-14 factory turbo. Only for ones with upgraded turbo.
@@devonsarkinen3165 that’s probably because most people would do the retrofit upgrade. These trucks are going on 10+ years old. If they still have that turbo it probably won’t last much longer depending on mileage etc.
I’ve installed tons of pusher products. As they come in my shop on customers trucks. And they all fit like garbage. I’ll never purchase or sell them.
@@christiandavis3910165k miles 2011 f250 factory turn 88k miles running a hot tune turbo is still fine
When will that intake adapter be available???
Had a question? Have you ever ran into ford trucks with driver side lean. I got 2022 f350 , has 3.5 ready lift and I got 1/2 inch lean driver side.
Man bro I got same problem on my 2015 6.7 drivers side leans in a little more than my passenger and I have a 6” fts radius arm lift
Id check body mounts, mine’s leaning a little too because my mounts are very worn out. I just ordered a set
Nice truck like where it’s going
Dukes of Hazzard the sheriff
Dukes of Hazzard
I'm not real smart about these things. What did you gain? and Is the smog stuff still intact. I have a 2013 F350 would love to improve it, and still stay legal. 139,000 miles . Live in Washington.
Are you friends with SPE? I can’t get them to send the parts I ordered and get the runaround from customer service. Love the parts I have but currently on a 1.5month wait for stuff that was sold to me in stock…..
I had to wait for mine as well. Hopefully it’ll be delivered tomorrow.
Dukes of Hazard
Dukes of hazzard
What’s the max psi you got mine got like 32 psi
Hope the next video is the plati!
God Bless You all. All Glory to God! Repent and live for God. Romans 10:9 “if you declare with your mouth that Jesus is Lord and believe in your heart that God rose Him from the dead you will be saved.”
Got it
Dukes of hazard
dukes of hazzard
Cordless bandsaw I'd ur best friend
dukes of hazzard soap and water
Do some burnouts videos