Part 12 C10 Wiring Repair | Universal Wiring Harness
HTML-код
- Опубликовано: 7 май 2013
- / milkcrate82
In this video series, I replace the entire factory wiring harness in my 73-87 Chevy c10 pickup. I'm using a 20 circuit wiring harness from Speedway Motors. The part number for the wiring harness is 910-64027. In this video I demonstrate how to remove the pins from the turn signal pigtail connector. Авто/Мото
Thanks! Just what I was looking for. Had to do the same swap like you did for my rebuilt steering column for my 76 CJ5. None of my tools worked, so took an old piece of older windshield wiper stainless steel strip (some old ones used 2 pieces of SS flat to secure rubber to blade mount), and grinded the sides to make narrower. The thickness was good already. Then inserted it, and wiggled (rotated) back and forth, and the pins all came out. If it pushes through too far, then you are on the wrong side, so use opposite side. Some of my original pins were not on same side, as one might expect. And, also, the old connector that was reused was not as long as mount on rebuilt coulmn, so just used ty raps to secure it to column.
This was perfect !!! I am trying to install a new switch in my 68 SS and no one has gave this detailed explanation .. with video included and showing connector. Thank you
Thanks for this video. I need that adapter!
Would like to know which one is hot and which one is the ground on the steering column for the breaker switch.
hi sir thanks for your videos i have a questio i have 1985 c10 my emergency lights dont flash is just stays on any idea whats my problem thank you so much.
Large paper clip works too...
How would I hook whispers up on my 87 r30 total different do i have to add wires
Can't find ignition issue, so I will go replacementl
My 21 circuit harness for my 86 c10 came with starter power cable. Just to be sure, do I run that cable straight to the starter or??
How do you disconnect the female plug?
The harness that I got from car and truck shop does not click in with my original harness in my C20 69 and the color wires do not match up either
hi, how did you connect the accessory plug? if you don't mind me asking. I didn't see it in any of your videos...thanks
+Yes seY Which accessory plug are you talking about?
I'm sorry, i looked over your videos and you stated that you didn't have power locks/windows. just trying to figure out how to wire the (orange wire labeled -12 volt battery fused- on the accessory plug for the speedway motors harness. the same one you have
Use a pick
Chevy sorry left that out
Dude liters keep re wording almost everything he says every other sentence!! Just talk! It doesn’t help that these videos are 3 mins long!