@@HooverA3060 My toy W1 is the earlier one with the plastic hoses. Drain hose is not broken but I ruined the drawer with detergent lol, now it leaks into the bottom of the washer's case. No electronics damaged thankfully.
This one does leak sometimes and makes a very weird noise when it turns clockwise after few months. The start button on mine broke but everything works.
@@HooverA3060 originally the motors were far faster from the Novotronic up to the W4146 Softtronic, I have one that goes at that speed, broken, no longer goes clockwise. Broke at the end of 2015, got a replacement months later, I still have the broken one. My newer replacement one goes slower. Could either be delibarate PCB programming or something to do with their motors. I would reprogram the PCB's all over again to have them go up to speed if it was PCB programming... the old motors spun the drums up to 500rpm spin speeds.
Hi, no this one luckily doesn't leak. But, with most toy washers, the leak tends to be where the pipe bends, as throughout its use, the plastic wears away. I replaced the one on my AEG toy with a rubber hose, as to avoid this issue :). Try and see if that works
@@angelicatiberii7 if you open it up, you will see there are 2 belts/rubber bands. If you remove the one going from the large black pulley to the small black pulley, then stretch the first band going from the motor and stretch it around the large black one, it’ll make it go much faster.
I've been lookin' at the Miele & the Bosh Klein you machines. I'm considerin' it not te collect, but for anxiety reasons(sensory sensitivities & fear I'll break the real machine & get inte trouble). I never had any of these fancy replica toys as a child, te be honest. I plan te use wan these toy machines, wi' ma ball jointed dolls socks & underwear. Which is best, Miele or Bosch? I've been wonderin' about if there's any drum size & performance variations, as the Miele is pricier. Yet, the real machine in ma hoose is LG "Inverter DirectDrive 9kg", so, I'm unsure which Klein toy machine, might help me learn & minimise ma anxiety better.
@@ryan_wmb because it’s ruining the original aspect of the machine. To me it’s abuse cutting holes, and practically using it for something it’s not. I have them for childhood memories and to preserve, not to basically modify
@@HooverA3060 Nobody could've said it better, when i wanted to add a 3d drum to my softtronic i thought well maybe shouldn't i ask miele if they can make me an insanely detailed toy model? With suspension, door seal, honeycomb drum and actual programmes? I asked them to and they said it's a very good idea, so you might see new toy models coming directly from Miele!
@@washcraft24 wow what a brilliant idea that would be! I had a dream when I was little, that I received a toy Hotpoint 9901 Washer Dryer for Christmas. But it didn’t act like a toy, it did proper cycles, spun at 1000rpm and even dried too, it also had the realistic Hotpoint 95 sounds too! So, Would be brilliant if Miele did that
I Made Mine speedier by taking The small belt Off and connecting The big belt With both wheel's, suddenly It broke by The Red cable that is connected With The Turn on and Off Button and now Its broken forever, this gives me memories of her...
Where do you get it from
Hi, I got this from eBay. Hope this helps
Thank you so much
This W1 version does pop up a lot, so hopefully you can get one :)
Mine is a bosch serie 8 doesn't make the beeping noises at the end of the programme or the jet fill but this one is awesome
Yeah, because it'll most likely be designed like the newer versions of the original toy. They also did a Hoover SIX version
These break quite easy the pipe that is attached to the drawer on mine came off
Yeah, the original plastic drain hose on the older ones was notorious for breaking off.
@@HooverA3060 My toy W1 is the earlier one with the plastic hoses. Drain hose is not broken but I ruined the drawer with detergent lol, now it leaks into the bottom of the washer's case. No electronics damaged thankfully.
If it's a toy washing machine, it's for washing toys, right?
I guess you can wash little toys in them haha. Would be brilliant to have one handy after playtime for washing any used toys 😏
This is why i would buy this toy
This one does leak sometimes and makes a very weird noise when it turns clockwise after few months. The start button on mine broke but everything works.
Hmm sounds kinda like how my other Novotronic toy models have gone
I wouldn't recommend buying it again.
@@lucasthings they tend to be ok so long as they’re looked after and not roughly treated. I’ve so far not had any issues with mine like that
@@HooverA3060 Keep it for 3 months, Then you get some rattling noises when the drum turns anticlockwise,
My miele toy washer is 3 months old.
@@lucasthings mine were in my collection for over 4 years and never got those issues
I have it but i disconnected motor from PCB and fixed the pulley so i can make the washer faster by alimenting It with my 20v alimentator
Good idea, it’s annoying that they make them so slow
@@HooverA3060 originally the motors were far faster from the Novotronic up to the W4146 Softtronic, I have one that goes at that speed, broken, no longer goes clockwise. Broke at the end of 2015, got a replacement months later, I still have the broken one. My newer replacement one goes slower.
Could either be delibarate PCB programming or something to do with their motors. I would reprogram the PCB's all over again to have them go up to speed if it was PCB programming... the old motors spun the drums up to 500rpm spin speeds.
Looks, like a realy spinig fast and how to Buy it??
Does spin pretty fast with good batteries! You can buy these on eBay, Amazon etc :)
Does your one leak cuz mines leaking
Not yet, but it does happen unfortunately, usually from the pipe where it attaches to the machine
For me it leaks when I put water and then I rotate it manually and it leaks water idk why
It’s so hard to close these I have to push it against the wall while holding the button and destroying my thumb I’d still keep it though-
Yeah! I noticed the W1 version seems to be a bit harder to close than the Novotronic/Softtronic ones.
Does yours have a leaking problem? For some reason mine does a lot of dripping when doing a cycle.
Hi, no this one luckily doesn't leak. But, with most toy washers, the leak tends to be where the pipe bends, as throughout its use, the plastic wears away. I replaced the one on my AEG toy with a rubber hose, as to avoid this issue :). Try and see if that works
@@HooverA3060 Ah ok, thank you!
Wait? What battery u use on miele bc my duracell of my toy washer goes 250rpm
I used 3x C cell batteries
@@HooverA3060 oh ok but my problem It goes 250rpm mine, or i think the problem its my Toy washer
@@angelicatiberii7 if you open it up, you will see there are 2 belts/rubber bands. If you remove the one going from the large black pulley to the small black pulley, then stretch the first band going from the motor and stretch it around the large black one, it’ll make it go much faster.
@@HooverA3060 oh ok
How do you buy the soaps?
If you mean the plastic pretend ones, they come as part of the set with the toy
Oh so not real soap used ?
Ohhh, no I used normal washing powder or liquid detergent in toy machines, only a very miniscule amount though
do you plan on getting the bosch one?
Probably not, I’m not really fond of it in comparison to other older toy washers
how mutch rpm its I will buy too one
Hi, it usually is around 500-600rpm, with new batteries. Some however may go faster or slower depending on the one you get
I've been lookin' at the Miele & the Bosh Klein you machines. I'm considerin' it not te collect, but for anxiety reasons(sensory sensitivities & fear I'll break the real machine & get inte trouble). I never had any of these fancy replica toys as a child, te be honest. I plan te use wan these toy machines, wi' ma ball jointed dolls socks & underwear. Which is best, Miele or Bosch? I've been wonderin' about if there's any drum size & performance variations, as the Miele is pricier. Yet, the real machine in ma hoose is LG "Inverter DirectDrive 9kg", so, I'm unsure which Klein toy machine, might help me learn & minimise ma anxiety better.
I've seen many people modify these on RUclips to make them work like the real thing I think that's times better. :)
Me too! I’ve seen a lot of that, though I wouldn’t ever modify mine
@@HooverA3060 why not? seems like a good iea
@@ryan_wmb because it’s ruining the original aspect of the machine. To me it’s abuse cutting holes, and practically using it for something it’s not. I have them for childhood memories and to preserve, not to basically modify
@@HooverA3060 Nobody could've said it better, when i wanted to add a 3d drum to my softtronic i thought well maybe shouldn't i ask miele if they can make me an insanely detailed toy model? With suspension, door seal, honeycomb drum and actual programmes? I asked them to and they said it's a very good idea, so you might see new toy models coming directly from Miele!
@@washcraft24 wow what a brilliant idea that would be! I had a dream when I was little, that I received a toy Hotpoint 9901 Washer Dryer for Christmas. But it didn’t act like a toy, it did proper cycles, spun at 1000rpm and even dried too, it also had the realistic Hotpoint 95 sounds too! So, Would be brilliant if Miele did that
Now you know we need to see a wash race now 🙂
Thank you
You're welcome :)
Ordered this on amazon and I can't wait till it arrives ,next Tuesday amd I'm 27 lol
Ooh exciting! Never too old to have fun with a toy appliance! Have fun! :)
@HooverA3060 oh I did have fun haha 😄 leaving it as a display now haha
Super washer 🤗
Most definitely
🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉
I Made Mine speedier by taking The small belt Off and connecting The big belt With both wheel's, suddenly It broke by The Red cable that is connected With The Turn on and Off Button and now Its broken forever, this gives me memories of her...
Good 👍
500rpm Wow!
Got it to do 600rpm the other day too