Это видео недоступно.
Сожалеем об этом.
SCI Live Line Electric Safety Demo
HTML-код
- Опубликовано: 14 июл 2016
- SCI REMC linemen take our Live Line Demonstration on the road to educate people about electrical safety. Schedule our Live Line Safety Demo for free at www.sciremc.com/liveline.
As a IBEW journeyman lineman, this is so well explained for those who aren’t educated in our industry.
it's not all 100% accurate. granted it's "danger" pushed to keep everyone safe but electricity will always follow the easiest path and most of the time that's the ground it is laying on. people often confuse shock with electrocute
@@GrimReaper01776 yes you have to climb in the cities at least everyone east of the Mississippi in my time. Detroit is the worst to climb in.
IBEW narrowback here that works with linemen lol
As a non union electrician this is so well explained why union workers get paid more for walking around and talking than actually doing work
@@fedfreds832 sounds like a personal problem you have there.
"we start out at a generating plant, lets just say we start there at 69000 volts"
This man passes the vibe check
420kV 🤪
@@andrewfield5656 A small station can be connected to the distribution grid directly so doesn't even have to be 69kV.
Here in Norway most small hydro power station below around 10MW are connected to the 22kV distribution grid. Think even some up to 20MW are connected.
69 kv
@@augustusdrane5249 yes 1000 of something in metric is a kilo
9000 volts at the substation
God bless all linemen thanks for everything you guys do we don’t have power without you
God bless their mothers . For without them we wouldn’t have power without them without them bless god mothers for without them without
Solar sadly will eliminate the need for linemen in the next 30yrs
@@mrsmith2904 not really, solar will just retrain them. The transition will be easier from linemen to electricians. Retraining will be much more difficult for truckers who will be replaced by artificial intelligence.
@@soupflood most of them are linemen for the outdoor adventures and the pay, plus it's a fairly simple job if you pay attention and clean most the time. Electricians make decent money but still have to dirty work, big difference when it comes to everyday attitude. And your right about truckers but nowadays in time they have to fight for thier money due to the companies dropping trip pay way down every other year
Amen dude
Lineman are the most under appreciated tradesman of all. Practically everything shuts down if these guy don't do their job. And then they have to deal with people who complain about losing power for 20 minutes
Not to mention they can die in a pretty horrific way if they or someone around them makes a mistake
You should check out a video from the channel On Final Paragliding called Powerline Incident Graphics and Rescue Footage. Absolutely crazy stuff.
@@coryvincent6249 My instructor had a white three ring binder of pertinent photographs. Everthing from pictures of foreign generation stations to hazards of the job.
The one picture that I will always remember was of an Iraqi sparky who was not wearing proper PPE and got bit.
Arc flash. He looked more like a barbequed hog, than a man.
Personally, I'd rather drown than go down like that.
@@SweatedPear oh man you have me looking for that now, I'm going to start school in a month for my EMT cert and then RN so definitely interested thanks for the info!
Not just that but in horrible weather conditions as well
Props to these guys, one job that deserves some respect. Also props to the presenter very intelligent and concerned with peoples safety.
It was boring.
Because 5 m.j 5
Nah bro. My favorite football players can do this in their sleep you know. That's why they make more money than pretty much anyone. Amen on that??
It’s not as cool as Instagram makes it out to be. Thanks though
@@pilbomags488 the job is extremely boring. You dont need half those 8000 hours to understand and do what they do. Imo they make a big deal out of knowing some math and being able to do things with their hands. The pay is amazing though and benefits are great too usually, if you can stick out the schooling.
This should be done in high schools.
It is. They came to my school 9 years ago
This!!!
maybe not in the usa but in Canada it was shown to us in both public school as well as high school and in out trades class's on eletrical
This education video was for kids at their school safety trip
It is! They came to my high school
this should be sent to every residence in a dvd so they could be informed, been in the communications business for 20 plus years and i learned some stuff i didn't know
Whats a DVD?
Communications isn't electrical so I would hope so....
Wait pal, we just watched it...
Nothing beats knowledge this is a really great thing you and your bosses decided to do joe ...a few mins on live saving hands on education...blessings
SCI deserves some respect and credit for going out and demonstrating this. ………..Interactive and not a slideshow goes a long way when getting someone’s attention. Job well done SCI👍
I served 15 years on my local volunteer fire department. I would have our local PSE&G (gas and electronic company) come and do a safety class it was so educational. I tip my hat to the men and women who work in this field.
This was so educational I now know how to splice the wires and use it for my home mini particle accelerator without building a device amplifier! 🥰 Thank you
So you're saying before this video you didn't know how to splice wires? Wow
@@saucewrld9995 maybe not properly
Sheldon Cooper
@@saucewrld9995 I knew how to splice genes too, don't be churlish, because it's easy to change them from a distance. The act of splicing wires wasn't what I learned, I learned how to use the high output for my advantage and research progression.
All you needed was a flux capacitor and Dolirian lol.
5:40 "It's going to try and burn that tree down". I wonder if PG&E uses the same setup in California.....
I was just about to say the same thing.
OOOH, ZAP! ⚡🌲🔥😬
Ya, it just popped into my head too..
I'm literally Lol!
dude im in california lololol
there power is always off anyway. hahaha
I remember having this sort of demonstration at school when I was a kid. I know that sometimes people get comfortable with jargon and acronyms but during this sort of presentation they really should spell things out. He uses several, PPE (personal protective equipment), FR (Fire Retardant)... most are easy to figure out but for the layperson they need it explained.
I was wondering what FR meant. Thanks!
Wow you went to the right elementary school
"So who here lives in subdivisions with those big green transformer boxes?"
Me: I do.
Very informative and well spoken/ dumbed down so anyone can understand. I learned more in 30 minutes than the past 35 years! Thanks!!
god i love youtube!! i swear you can learn a trade as long as your mechanically inclined just by youtube!!! i got a job at the shipyard when i was 18 as a pipe fitter no education not even a diploma making $32 an hour. little did they know i knew nothing about fitting pipe. i started watching all these videos on youtube about pipefitting and stick welding and was able to start the job like i already knew terminology and techniques for fitting and stickwelding/tacking the systems together!! I'm now doing electrical work converting warehouses from HPS to LEDS. and i learned alot regarding codes and electrician techniques for doing things just from watching youtube!! im pretty sure legally im not supposed to even be doing my job considering im working on live circuits, running new circuits from the panels and wiring everything up.. but thanks to what i can learn online i have had 0 issues other than the occasional shock lol, but thats kinda hard to avoid when code says u have to leave 6 inches of wire in a box and the previous electrician left me about 2 inches and i have 6 or more wires all tied together in a single wirenutt
Grandpa was a lineman. God bless you guys 👍🏻 be safe out there & thank you for what you do!
Very informative. Especially, the last comment on the surge arrestor jumpers and transformer brackets. I've been dealing with small birds (sparrows, etc) tripping my cutouts. For the last 4 years, every autumn hundreds of birds all flock together and simultaneously land on my 3-phase transformer pole. During that season, every few weeks the power ends up going out, and the transformer cutouts then need to be re-fused. Thanks for sharing this, at least gives me an idea what needs to be insulated better.
Every one needs to see this! Utility locator here the general public needs to get a little more info on what makes their life's easy to keep them selfs safe and report issues rather than hide them and fear a financial penalty and risk the entire communities health sadly see it every week
Tough crowd. Must be hard giving presentations to young people as everyone is too busy being self-conscious to take part. Me? I'd have been wearing one of the helmets and I'd have definitely tried eating one of the sausages to see how well it was cooked.
Its all about the participation.
Good demonstration though. Clear and concise; and informative yet enjoyable. Good demo rig too with all the live circuits and transformers. Its cool you guys take out the big guns to show people rather than just show a video and point at pictures like a lot of safety demonstrators do.
You boys actually demonstrated.
Good show. :)
I think it is a trade school, they are all too cool to get involved. You never want to look like you're learning something, because then ya might be accused of being smart or something! :P
He paced back and forth probably 2 miles, but great presentation and I learned a great deal. Thanks.
I don't work in the field but I do work around a lot of electrical equipment. This lineman perspective is vary informative info. Thanks.
Joe Banfield: Im going to go over some of the Do's & Dont's now
#1 DO stay away from power lines I repeat "DO stay away from power lines"
#2 Don't go near power lines
Thank you everyone for coming out.
Interesting. A lot of our power failures here are caused by shorts on the poles in winter: dried road salt gets flung up onto the wooden poles by traffic, then a light rain wets it down, so you have wet, salty (very conductive) wood. You can hear the electricity sizzling through it. Eventually one (or more) poles becomes so conductive that it heats up and catches fire, then the wires come down.
Concrete Poles As A Solution .
Very informative. Never heard about the bunny hop technique of retreat, but if it works its well worth knowing. Stay safe out there.
By him saying the homeowner "hooking it up wrong" in regards to the generator, he means hooking it up correctly but not interlocking the service main breaker where it's open when using a properly installed generator connection.
...you mean Hookin the Honda up and forgetting that the main is still closed but don't matter because there is no voltage on top of it....yet...?
Truth is most people who don't know anything at all just plug the generator in at a plug that happens to be connected to the circuits they wanna run.
All the copper connected to that circuit becomes a telephone line.
I'm not saying it could happen nowdays but would love to see a Honda 1000 el cheapo light up a transformer. If it don't go "BOOM" then it will just be open and take longer to fix
Yeah I'd make my own tons of places sale all the right stuff to make up your own fuse box even the right size of wire or type aluminum or copper
I was in Oklahoma staying in a rv, with my boss his dad's place, power went out uncle went out to hook up the converted irrigation motor to a genny. I'm vacuuming the floor an the power goes out couple minutes later comes back on, I went back to vacing shit started smoking. I finished quickly went to look out the garage. Seen my boss dad sprinting across the lot shuts off the genny. Well 2 computers 3 deep freezers an one vacuum. Where taking to soon that day. I assume its because of what this man explained to us.
15:00 sounds like someone in the audience gagged at the fried “fingers” demonstration.
Thank you for the demonstration,
I've seen some crazy things happen with electrical power lines.
One time a person from my high school decided to toss his old pair of shoes up on the line, he contacted 2 wires which then caused the square block of wires to start to fry and melt the casings. Luckily everyone had cellphones and called the fire department and they followed the sparking flaming line, not sure how it stopped but it did eventually. They couldn't do anything until the electricity company cut off the power.
Another time a huge small tree sized tree branch fell onto the power lines outside the house and it was hanging there, had to call electrical company which put me through to forestry which then removed the branch. I was amazed that the line was able to hold so much weight... well before the forestry people came to remove it, some numb skull idiots decided it was safe to walk right next to the fallen down branch which was pretty damn close to the side walk. Luckily the line never broke, split or cracked to let a current through or those people would be literally toasted inside.
The reason they can hold so much weight is mainly for the fact that between poles they are sagging a bit by default, it would otherwise require much more force between each pole to hold it up, next to the risk of a pole toppling if it would snap somewhere.
(And there's also the thing of the cables being made up of tiny copper wires wound together into bigger cables, bundled together to form the bigger cable, they are able to carry much more weight than 1 solid cable.)
I sat through entire presentation and a little boring but very VEERY INFORMATIVE!! I LEARNED ALLOT THAT I DIDN'T KNOW AND FOUND OUT SOME URBAN MYTHS THAT AREN'T TRUE!!!
THANK YOU I'M SURE YOU GUYS HAVE SAVED MANY MANY LIVES!!
I used to work for the local cable company, we had a lot of aerials in our community so I had to carry an extension ladder down ally's and then sling it up on the mid span, usually the cable company has the lowest span for fiber and coax. but when I was on top of the ladder at the coax/fiber I was very very aware of the humming wires above my head. that shit was scary when it was wet outside.
This demo could save so many.
The step potential is a bigy. Linemen all know it like second nature, but average citizens mostly have no clue. Linemen are like bomb squad guys to me, what they both work with can end life faster than you can blink. Huge respect.
Respect to all those that work on power lines or with electricity in general!
My dad was a T&D lineman in St. Louis for 23 years. When I was little, we could set our clocks to the phone ringing as soon as the sleet started. 5 below to 105, rain, sleet, sun. And he started doing it right after he got back from kicking chinese ass in Korea for 2 years. Here's to these under-appreciated heroes. He did it to allow me to go to school and become a lawyer. I think I was more proud of him than he was of me.
Thanks for the video. Extremely informative and THANK YOU for providing proof. Alot of school is just words, you show why which is how I learn the best.
That's a neat demo. Our site requires us to use a tick tester before making contact with recently energized parts. You should add the tick tester to your demo.
These guys should explain everything that is unknown to us mortals , excellent demo
We used to have a transformer in our backyard that constantly tripped. The power company would come out and use a pole to flip a metal rectangle "switch" upward and we'd have power again, took them hours to come out and 45 seconds to "fix" it. They refused to replace it even though we lost power 3-5 times a month during the summer. Finally got to the point one of the immediate neighbors got a long pole and it stayed on the ground under the light pole so one of us could flip it back up each time, reducing the outage inconvenience to 10min or so. Finally took 11 households banding together, one of which was a lawyer, to get the power company to replace the transformer. We lived there 3yrs after and never had another power outage. Not sure any of us would have done that if we had watched this video first! I had no clue those wires were live and not insulated, crazy!
Microwave ovens do NOT cook from the inside out. The radio waves only penetrate about 0.4" (1 cm), so they only heat the outside. The heat from the outside conducts to the inside of the food.
It's pretty cool that you guys do this free of charge. It's very informative and could save a life.
Oh there’s definitely a - charge -…
Duh dum tsss.
I’ll show myself out.
@@falonhurst really dude? Oh you're fun a parties, aren't ya sport? Moron
It's not free of charge. The utility company will pad it into their cost of power. Someone is paying for it.
It's neat that it is free of EXTRA charge.
My little brother just started a linesman apprenticeship. How they can hear that hum of electricity and not **** their pants is quite impressive.
When I need to go into the UPS room at work (not an electrician by the way, we sometimes place soaked camerabags there because the room is kept at a low humidity and is reasonably cold, so the things dry well there) I always make sure to be in and out as fast as possible.
Not only does the humming of the whole distribution box and battery bank freak me out, I probably don't want to be there when a power outage happens, since the switches in the distribution box are probably springloaded and maybe also supplied with gas cannisters to quench arcs and as a result, it's probably stupidly loud.
I work and am learning electrical residential. And I thought this was awesome thanks for the post !
As an equipment operator that's comes close to many wires regularly, we are trained to do what's referred to the Hydro shuffle when requiring to exit an energized machinery. Bunny hopping away leaves probability of one foot leaving the ground at a different time than the other. You don't want to be the electrical short between the rings of voltage radiating outward from a live wire contact.
Number one must have for linemen is a goatee!
Woah, one minute im watching rap, then im learning about power lines. This is some electric stuff!
RAP? yeah that explains a lot
I have been in the HVAC, Plumbing, Electrical, Building Operation and Maintenance industry since 1976. I was fortunate to have been through Arc - Fault / Arc - Flash training. I thought that your demonstration was very well presented. You may want to mention to tradesmen about transient voltages that may be carried along with the power lines and that their testing equipment should be Category III / IV rated and anyone who works directly with electrical infrastructure should be wearing NFPA70E clothing. BK
This was really cool to watch and VERY informative
Excellent presentation!!
Been in the trade over fifty years. Love everything about it.
Wish I could learn from you, I love electric
@@LIL012185 there are a lot of good mechanics out there take knowledge from all of them. Thank you for complement
@@LIL012185 it's a great trade it's forever changing. Never boring
That is a great accomplishment!
I retired after 42 years. I'd do it all over again.
@@ghalgren I'm 70 retried open up another electrical business. Love the trade ( prices through the roof what was I thinking )
Wow!!!! I did residential for quite some time and knew a little, but this is like must know stuff for every homeowner
I think another super important thing is diving into the specifics as to how electricity works and why. And how. And where. the whole 9. Having a better understanding of how things work and what not to do I feel is definitely worth explaining more indepth and most definitely not a waste of time. Electricity is a mysterious thing. And it's gonna do what it wants if you let it and can be extremely complicated.
Good moment in video and the job of quality professional. Tank you very much.
Idk why I just watched this but interesting stuff
Same here 😳
Same🤣
Same here 🤣🤣🤣
Same. Just couldn't seem to turn it?
I helped build substations when I was young so I tried to act like I knew what he was talking about
At the beginning of this video, I was just about to say, how stupid could somebody be to plug his generator into the mains. Then I remembered that a college of mine whom I considered to be quite knowledgeable about electricity complained to me that his generator kept tripping when he plugged it into a wall socket so that it would power the whole house. Even though that is not quite how things should be done I asked him if he turned off his mains idolator before he connected the generator, to which he answered, he hadn't. I explained to him that his little 5KVA generator was trying to power everything on the grid outside the transformer or sub station that had tripped and how to rectify it, hopefully before electrocuting a few electricians.
How exactly do you disable the mains isolator?
@@Fatvod Usually, it is a huge big fat switch in the DB. Turn it off.
I install them. it has 2 selections: Generator and Grid. You can only select 1 or the other, not both :D
@@Fatvod just turn off your main 100, 200 amp breaker and put a pin though the metal ring so no one can just flip it back on, wire your generator into a double pole 30 or 40 amp breaker i have a 40 amp as my generator puts out 220v 40 amps, after you turnoff the main start your generator, turn on your 30 amp breaker in the panel// good to go
@@arnoldromppai5395 Google or look on eBay for an Interlock Kit. It is a sliding piece of metal that won't let you have the main breaker and generator breaker turned on at the same time. That makes the set up you described idiot-proof. No matter how good we are, we all make mistakes and all have momentary lapses.
That was totally time worthy, Lifesaving, and informative. Thanks...
This was really good I learned a lot. They are doing this to save a life no charge... Salute
Great video, appreciate what all linemen/women do, stay safe folks
Great knowledge about electric power and safety....well done.
Great information - it can save your life.
The instructor's pacing mannerism (back and forth) is described as a Tethered Elephant in the education field. He should conscientiously work on rectifying that distraction.
Dude thanks for saying that. I was starting to feel like my brain was sputtering. Couldn’t really understand why.
I just put in a Generac backup generator and a new service panel. The power company guy got up on a 24' ladder and pulled new wires to my new post by himself. That's one gutsy guy because the electrician putting the ATS in said he's never do that.
As somebody about to become an apprentice electrician this was very informational
Great information.you guys are the best.
Excellent vid. Not sure who the audience was or who it's for but as a fork lift mechanic I enjoyed listening to the vid and in no way did I feel as if the instructor was putting those listening down, he was telling things the way they are.
Great presentation, guys! Well done, and very informative.
This demo was awesome! Much appreciated!! Thanks for what you’re doing.
Eleven year lineman, work for William Electric Shelby NC. Contract for Duke Power 7200 volts. Did underground and overhead and even set the meter, we did it all from one pole job to eight or twenty pole whatever it took to do the job.
I live near Chattanooga, just south in Georgia. The top power line are 3 wires (3 phase). A storm blow a tree down and it broke all 4 power lines. The 3 phases and ground.
The top power lines were laying on the road. People, with bare hands moved the high voltage power lines. They may have been dead, but something could have back feed.
Some people are DANGEROUS.
Another time a 2 phase line was on the ground very close to a trailer park with lots of little children. I called 911 and they said a downed line was not dangerous. sometimes 911 is not what it should be.
What happens if you able to stay in a car and it’s energized. Would the lines be deenergized and how long would that take in an emergency?
@KlixTrio, cars are generally a metal shell with fabric and plastic interiors: in most cases, power will flow around the outside of the car to the ground, leaving the inside of the vehicle relatively safe. That flow might trip a cut-out, but it might not, and it is virtually impossible to know when it's safe to leave without a utility worker being present outside the car. Response time varies by conditions (It's really hard to get out to you if you're in a rural highway during a blizzard versus if you hit a pole on a warm summer night), but they will prioritize getting trapped people out safe before they work on getting power back on.
Unless there is something that makes it too dangerous to stay in the car like a fire, just sit tight, call your local power company or 911 so emergency services know exactly where you are, and be patient. It just takes time to make sure everyone can get home safely.
"I'm a lineman for the county!" - Glenn Campbell
Blue collar workers, the lifeblood of the greatest country ever made.
I'm a Mexican-American and I love the u.s.a!
I really think this is a great thing to show people.thank you guys
As an IBEW inside Journeyman wireman i can say i learned about step potential ratio and bunny hop.Thanks
Great presentation. Thanks.
i live in an old subdivision with lots of trees and power lines above, this is good education with all the power lines i seen fell from trees and Storm, and didnt know u had to bunny hop out of the car!
Wow, I learned a lot. Tons of respect for lineman, coming froma 4th year ECE student. Bravo!
VERY nice demonstration and lecture ! Congratulations to your crew for a job well done. QUESTION: Have you ever seen a failure of a pole transformer in the distribution side of your business? If so, what caused it?
Leaking oil, a broken lug, improper connections… the transformer itself is rather fool proof
I wanna see this demo at Texas Huntsville. The real deal.
That is the purpose of an ATS ( Automatic Transfer Switch ) when a customer buys and has an electrical company install the pad mounted generator. I personally have most experience with the Cummins generators and I have done a few of the Generac generators. When the house loses power the generator senses the lose of utility and switches the panel towards generator power, then once utility comes back the generator switches back in around 5 mins (depending on brand).
How can you scroll past that thumbnail. You can't ! Great job
Yo the bunny hop out of the car was the realest thing I've heard since, I seen my momma gone forever. Cause thats something we all patiently face.
It's always impressive when the demonstrator is chewing a cud throughout the demonstration.
@Archer Stetson shut the fk up scammer
Not to mention almost out of breath. 😅
Thanks for the education well done.
I think they should keep the voltage at 69,420 instead of stepping it down to lame old 120v
Nice recommendations RUclips, and question, why aren’t power line wires insulated?
It's because it's easy to tap into them. Also this will give breathing room to the wires. And the main reason is to increase power capabilities. The main problem of insulation is that a fuckup in a line can cause all of the insulation to burn and melt. Imagine this in a larger scale
Also exposure to the elements will create headaches as insulation will break down over the rain etc.
They are insulated, with air. Air is actually a pretty good insulator. The separation is different for different voltages though, as air has an insulating factor based on distance. I don't recall what it actually is at the moment, but something like a kV/cm, or somewhere around there. It does change a bit when an arc is struck, and their becomes ionized.
It costs less , bottom line.
@@robert37042Tn that's the truth!
Great video guys
Nice demo! do all the regional utilities do this?
Quite educational... Thump ups
They need this type of demonstration for my community here in Wv. The power lines here in some spots is no higher than 20ft and that in the mountains and spots that haven’t been upgraded. I know where a pole is near me with an open wire secondary on it that’s 12 foot above your head! Power company has been called and emailed multiple times but guess it won’t be fixed till there’s a fatality.
FYI: it's Blue Heron (not Herring). Unless you're into birds/wildlife, you wouldn't necessarily know that, but it's a fairly common mistake. 😉
FYI when they deal with it it's a cooked chicken !!
Mylar itself is not actually conductive, it’s an insulator. However, balloons aren’t just made of Mylar… they are also coated in a thin layer of aluminum, which is very conductive. The aluminum is why it’s reflective, otherwise it would be clear. Same with a bag of chips: it’s aluminized, and if it blows up against a power line, it’ll do the same thing as a balloon.
Asking on behalf of a friend. Is it best to pre cook my sossys before hanging them on the powerline ?
a good example of why i get so nervous about branches falling on my power lines, they can do a bit of damage and i leave the line side branches to the guys that come and cut them
Well done guy's. Keep it running and safety is no accident!
14:56 Actually that's just a common myth. Microwaves do NOT cook from the inside out. I'm kind of surprised he didn't know that.
really enjoyed this video
I was trying to look up how electrostatic precipitators worked and found this. I'm not dissapointed and found out some new things. :D
dont' know how this is recommended to me but great vid
Very enLIGHTening class !
Respect to these dudes.
This is how we cook our hotdogs when we are working to far to make it to a restaurant during lunch break.