Excellent video👍 .Please can I ask a question: You mention a Godox x1 at the end of your video, I have 3 Godox DE300 strobes, which I would like to control. please could you let me know what additional equipment would I need to achieve this? Thanking you in anticipation.👍
I also just bought godox de 300 w and it works well. I used XT-16 R for the trigger and receiver. I find these lights far too bright even on their lowest setting. The problem is the power is too strong even if I put it down to 5.0, do you have any solution? thank you
HanScreen - Hope you shoot in Manuel mode so you have just to go up to F 7 or F8 or you have just to increase the speed go around 1/500 something like this... You should have good exposure
Just ordered 2 of these and am hoping I can shoot as low as f/1.8. What is the lowest output, 18.75 ws? As I want to shoot wide open using a shoot through or reflective umbrella at 50-100 iso, of a full body or cropped body shot.
I find these lights far too bright even on their lowest setting. Have had to buy some ND gel material to use over the reflectors. However it is very difficult to gel a softbox. Great shame as the lights would be great if the power could be lowered. BY their very nature, softboxes have to be close to the subject, so having to use F16 or 22 with these units makes them pretty useless. Would love a recommendation for some cheap monolights that have far less power.
I purchased from ebay, there out of production now but there still seems to be plenty of stock around. I have found they can run hot if used hard and the recycle time is a little slow, but part from that they are holding up well for me.
Good studio lights. I used for the past 3 years I have 3 of them and want to buy 2 more
Excellent video👍 .Please can I ask a question: You mention a Godox x1 at the end of your video, I have 3 Godox DE300 strobes, which I would like to control. please could you let me know what additional equipment would I need to achieve this? Thanking you in anticipation.👍
So did you place the microphone INSIDE the box or on it? Asking for a friend.
Can I use the godox DE 300 for a musical video shot
I also just bought godox de 300 w and it works well. I used XT-16 R for the trigger and receiver.
I find these lights far too bright even on their lowest setting. The problem is the power is too strong even if I put it down to 5.0, do you have any solution? thank you
HanScreen - Hope you shoot in Manuel mode so you have just to go up to F 7 or F8 or you have just to increase the speed go around 1/500 something like this... You should have good exposure
Try using another defuser in your softbox, and/or a honeycomb on your light box. That will soften the light and make it less bright
Just ordered 2 of these and am hoping I can shoot as low as f/1.8. What is the lowest output, 18.75 ws? As I want to shoot wide open using a shoot through or reflective umbrella at 50-100 iso, of a full body or cropped body shot.
I find these lights far too bright even on their lowest setting. Have had to buy some ND gel material to use over the reflectors. However it is very difficult to gel a softbox. Great shame as the lights would be great if the power could be lowered. BY their very nature, softboxes have to be close to the subject, so having to use F16 or 22 with these units makes them pretty useless. Would love a recommendation for some cheap monolights that have far less power.
Can it shoot outdoor?
Same thing I want to ask but I wonder why you haven't gotten a reply yet
Hi,
thanks for the video. Can you say what is the maximum wattage (W) for modeling bulb? 300 means 300W?
Hi, The 300 stands for 300w flash power from the main bulb, the modelling lamp is 150W, Hope this helps👍
I still see a few of these on sale. Can you go up to 1/2000 with this and the x remote?
HAVE YOU TEST THE COLOR TEMPERATURE STABILITY?
Is the modelling lamp can be replaced with common led lamp?
Yes it can
@@FuscoFitnessJourney okayy thank youuu
Hi,
Can I trigger these lights with the Godox X1C trigger from my canon camera?
To trigger the lights you will need the relevant receiver, these lights do not have a built in a receiver.
It’s the same build as the neewer ds300 but the recycle time is terrible
Can any light work with that ?
want to buy for studio 3. Where you buy? What are the + and - found?
I purchased from ebay, there out of production now but there still seems to be plenty of stock around. I have found they can run hot if used hard and the recycle time is a little slow, but part from that they are holding up well for me.
good =)
Please Godox sk 300!! 300w Review video