How To Replace A 2007-2013 Toyota Tundra Serpentine Belt | 15-20 Minute Job | Replace Auto Belts
HTML-код
- Опубликовано: 7 окт 2024
- Please SUBSCRIBE and hit that THUMBS UP button. It really helps grow our community.
Dayco Serpentine Belt - amzn.to/3yPsPqz
CLICK THIS LINK: linktr.ee/tigh...
Here you will find a link to some of my favorite things in my Amazon Storefront, a link to buy TShirts, and links to all of my other socials.
My description includes referral codes/links that allow me to earn points or credit that can be redeemed for products and/or subscriptions. When you use my referral code/link, you are helping to support me and my recommendations! Thank you for your support!
Music: The Right Direction by Shane Ivers - www.silvermans... 
Хобби
This is one of the better DIY videos. Good tip on that allen wrench pin!
Thanks! I’m glad it helped you out.
Thanks for the vid. Im sure i could figure it out, myself but its always nice to see the challenges, beforehand
Agreed! I always look for a video first!
Man, thanks so much. The wait to get into the dealership was over a month… I did this in about 30 minutes following your video 😅
That’s great! I’m glad it worked for you too!
May or may not have used that Allen wrench on my last replacement…. May or may not have had my wife hold that breaker bar while I did the work 😑. Thanks for the video 👍
Haha. Nice job!
Nice tutorial. What size allen wrench? Very important data. Thanks...
I was changing a dayco belt every 4 months. I changed a few pulleys and belt, 4 months it squeaks again…. Changed belt and tensioner and it’s pulley, 4 months Dayco squeaks again. Toyotas are known for squeaking belts. I even tried finding the infamous “Goodyear Gatorback” belt….. they sold out to Continental, and they stopped selling it. You may find someone still selling them on eBay, no luck for my Tundra. So today Feb 6, I’m dipping my belt in 303 aerospace rubber protectant for 15 minutes….. I’ll update in 4 months…lol. I don’t even put the skid plate on anymore.
Your experience is not typical of these trucks. I replaced my belt at 100k and again at 210k and both were quiet. The tensioner pulley did have a bearing go out and that’s why I replaced the first time.
To say Toyotas are known for squeaking belts is simply not true.
@@Ryan.Willis I sit and wait for my kid to get out of school in the car riders line……I can hear a squeaky car from 3 blocks away, when it reaches me, 9 times out of 10 it’s a Toyota. There are also RUclips mechanics that say, Toyota pulleys are slightly off causing them to squeak. All summer long my belt hasn’t squeaked, now that mornings are getting cooler and wet, my belt squeaks from the start. I spray 303 on the bottom pulley, where my belt is exposed and it stops immediately.
We all have anticdotal evidence, but my two cents... we have five toyotas. Two tundras, two camrys, and a rav4. From2011 to 2022, and from 217k to 6k. None speak, never have. I wonder if there is a dry bushing, bearing, or such. To say everything of a brand speaks is to paint with a very wide brush.
Everything that I am sitting at a light and something is sqeaking, it is nearly always an older American car. Just my experience. Never just one brand or category.
I have seen videos that suggest the tensioner and idler should be changed when squeaking or premature wear occur. I hope that you find what the issue is. If so, please follow up with the fix.
Also, to tightwad diy, thanks for this video, made it a quick job.
ruclips.net/user/shortsUKoy4SypBSw?si=VeuDG-LKkAs-qfNj
Only use Toyota belts. Anything else does not work, period. Dayco, Continental, Gates…nope. Spend the 70 bucks on OEM and forget about it for another decade or more.
Nice - thanks for sharing!! Firestone wanted $360 to change mine out!! Their shop rate is more than $180hr here in Texas. Their crazy!! Time to break out my tools and teach my 16 year son some quick car lessons.
Quick question - can you explain more detail what size Alan wrench and what was the purpose of the Allen wrench? Does it go into the groove and lock the tensioner from turning?
Sheesh that’s really high for labor! The Allen wrench fits into a hole that holds the pulley and relieves tension on the belt. I don’t recall the size and I no longer have this truck. Sorry.
Thanks u saved me alot of money already can you show how to install the daytime running lights
I have videos for all of the lights on this truck.
Awesome video well done made the job much easier!
Great! I’m glad it worked for you too!
Thank you sir for taking the time to inform. 👍
My pleasure.
I about got divorced changing min last night. Had to give the ol' lady a little dad treatment " hold that light right here!" anyway thanks for the allen wrench tip
Haha. I’m glad you got it fixed.
Nicely done video. Thank you.
Thank you!
Thanks for the wonderful content. How is the belt holding up? I keep hearing about squeaking issues with Dayco belts but wanted to get your real life exp.
It has been great! They ended up replacing the idler pulley though. It was a faulty part.
Can u tell me which pulley to start I’m having so much trouble putting the belt back on
I discuss that in the video. I start with the pulley just to the left of the fan.
I got it done I heard that part I wasn’t leaving the Allen key in the tensioner I’m so dumb this video was helpful and thanks for the quick response ❤
@@Stuckinthepast_I’m glad you got it figured out.
Great job buddy
Thanks.
What do you mean Alionkey what part do I need that for
An Allen key or hex key.
You use it to hold the tensioner out of the way for belt replacement, after the belt is in place you remove the Allen-key or whatever you stuck in there to hold it back so that it can again tension the belt. The holes for this are 5mm, it doesn't matter if you use an Allen-key, a bolt, a screwdriver, or whatever, as long as it fits in the holes to hold the tensioner back while you remove and install the new belt.
how do you get the belt on without going over the fan
Watch the video. It doesn’t actually go over it.
@@TightWadDIY after looking at a diagram i see how it works
Cool
Thanks
Plan on cutting up your hands a forearms. There is zero space to work on my 2013 Land Cruiser. I read somewhere that shops would only charge $150 to do the job. If that's the case it would be well worth it. It's a miserable job on a Land Cruiser spend the money.
It’s a tight squeeze on most vehicles. You have to factor time and cost and make a decision.
A shop wanted to charge me $600 to do this
I just changed mine yesterday on a 2008 Land Cruiser. Hardest part was twisting the tensioner with a long ratchet and getting an allen key (I used a 5.5mm) into the hole. Routing the belt wasn't easy but got through it using the diagram. Not an easy job, definitely a knuckle scraper. Very little space to work in. 90 minutes.
How long of a breaker bar did u use?
18”
Why not get a Toyota belt?
I don’t think they make their own belts.
You should have shown the actual work. I have been fighting with the tension for over an hour
I showed as much as possible. It’s way too tight to get a camera in there with my hands.
You showed nothing
Why wouldnt you show us what noise it was making? You show us after when its quiet but not before -_-
Hi there! This is Kyra from Issyauto, a professional brand dedicated to producing the best car parts.We'd like to invite you to do a review on Center Console Cover for Tundra 2007-2013. Would you have interest in reviewing it? Could you please provide your contact info if you’re interested? Thank you and look forward to your reply！
You can emails me tightwadrepairs@gmail.com
@@TightWadDIY Hi there, we just sent an email to you. Please check it out and look forward to hearing from you soon! Thanks!😀
Caint kill a yoter
You’ve got that right! It’s been a beast!