What is the reason for the bushing that is threaded into the upper thread of the casing joint? Unscrewing it after the CRT releases the joint seems to take a lot of time and put the roughnecks in a dangerous position under the blocks.
We are running Tenaris Blue in this case, which is a premium connection. The safety nubbin prevents the threads from being damaged when the CRT enters the coupling. It also provides additional friction for the tool to engage/disengage.
Thats good no elevator but later when theres big weight they will for sure need a spider in the rotary and the crt will be only helpfull for lifting casing and filling up and circulating maybe also its good because they can go down more than if they were using elevator also i think they would have changed the tong if they cannot go down more and use tong with no backup
nice new iron with the latest new tooling.. you will eventually streamline it til it slides right into place.. these will be the days that you tell your children about though!!!
In this case the customer did not want to run the casing with the CRT, they wanted it for rotating, reciprocating and handling in case we hit any bridges on the way down.
Pierre Berube but looks like this costumer does not know the capabilities of a CRTi, you can actually reciprocate, make up connections and will be better than using tongs, as you will have a safer operation
No disrespect but you guys are just too clean cut . grow your hair out a little bit and remove all stickers from hard hats.Loosen up a little bit and show some style. Hav a nice day👷
Наука
No idea.. but VERY impressed ! As an office wonk, it make you appreciate what real work is !
Tenaris is an ancient connector, but well proven. Possibly up 30 years + that thread form connector. Nice video.
The throwing of the casing slips at the end was impressive. Most crews just kick them in the hole.
Blue cnx Tenaris very good!
The dope man peform❤❤
Yeah its right but i thing they use the crt in this case only as fill up tool
What is the reason for the bushing that is threaded into the upper thread of the casing joint? Unscrewing it after the CRT releases the joint seems to take a lot of time and put the roughnecks in a dangerous position under the blocks.
We are running Tenaris Blue in this case, which is a premium connection. The safety nubbin prevents the threads from being damaged when the CRT enters the coupling. It also provides additional friction for the tool to engage/disengage.
Tanaris is just a soft thread that expands with heat
@@pierreberube8731 Thanks for explaining that.
Thats good no elevator but later when theres big weight they will for sure need a spider in the rotary and the crt will be only helpfull for lifting casing and filling up and circulating maybe also its good because they can go down more than if they were using elevator also i think they would have changed the tong if they cannot go down more and use tong with no backup
nice new iron with the latest new tooling.. you will eventually streamline it til it slides right into place.. these will be the days that you tell your children about though!!!
ពូកែខ្លាំងណាស់
What are they doing? Normally CRT using instead of Power tongs. But here they are using both.
In this case the customer did not want to run the casing with the CRT, they wanted it for rotating, reciprocating and handling in case we hit any bridges on the way down.
Pierre Berube but looks like this costumer does not know the capabilities of a CRTi, you can actually reciprocate, make up connections and will be better than using tongs, as you will have a safer operation
Is that a
Double??
Im honestly amazed that these CRt's are popular,
they are really slow compared to elevators and power tongs
Jarred Leis slower than elevators yes, but with a Volont tool, you can rotate the casing in the hole.
Fuck I miss running powertong...... do not drink and drive
Intermediate casing.
Best not Dope (Lubricant) tool joints with tools in the rotary table! - Drop the brush and you will be going home early.
Half a million dollars down hole tool
Tar Sand country.
Amateurs... The WFD Overdrive system blew them away...
No disrespect but you guys are just too clean cut . grow your hair out a little bit and remove all stickers from hard hats.Loosen up a little bit and show some style. Hav a nice day👷
Ruin a career