Replacing Internal Zinc Anodes on an Outboard Engine
HTML-код
- Опубликовано: 28 янв 2015
- Please be sure to like and subscribe to my channel to stay informed and get the latest videos. Instructions are at the bottom.
You can email me at captdrewcavanaugh@gmail.com or my website is listed below for more info.
The video description is listed below.
____________________________________
Yamaha - amzn.to/4cZTjqQ
Yamaha Trim Switch - amzn.to/4bTbihk
Yamaha Trim Fluid - amzn.to/3zP2Q5D
Yamaha Ring Free - amzn.to/3Lz1Oxf
Yamaha Mini Water Fuel Separator - amzn.to/3WvgX99
Yamaha Water Fuel Separator - amzn.to/3YbaYr7
Yamaha Fuel Filter - amzn.to/4bSKnCD
Yamaha Oil Filter - amzn.to/4faSkWj
Yamaha Oil - amzn.to/3WqqXjP
Yamaha Lower Unit Fluid - amzn.to/3WeMkDg
Yamaha Paint - amzn.to/3LR15rv
Water Pump - amzn.to/3WtesE2
Thermostats - amzn.to/3YcqMtU
Spark Plugs - amzn.to/4da1GQo
Anodes - amzn.to/4d4bDyO
Sta-Bil - amzn.to/46bBrH2
West Marine - amzn.to/3M25Bn7
Garmin - amzn.to/3zKkebw
Batteries - amzn.to/46dFW3S
Marine Odyssey Battery - amzn.to/3A9nBJb
On Board Battery Charger - amzn.to/3Wju9fV
Lithium Marine Battery - amzn.to/3A2ME0M
Bilge Pumps - amzn.to/4c56A0a
Transom Saver - amzn.to/3zT5LKr
________________________________________
Boat and Tackle Care:
Rem Oil For Reels and Engine - amzn.to/3LxOTvA
H&H CB12 Corrosion Block - amzn.to/3Lv1Jux
303 Protection - amzn.to/4dj06ff
QD Electronic Cleaner - amzn.to/4dbe42Q
Boat Bling - amzn.to/4d5C6w0
Star Brite Deck Cleaner - amzn.to/4cPo41G
GetterBack Underwater Rod Recovery System - amzn.to/3WcDhCY
Damp Rid - amzn.to/46vnhAL
Sta-Bil Marine Treatment - amzn.to/3yjZF5t
Salt Terminator - amzn.to/3WtGpLZ
Boat Trailer Parts - amzn.to/4c4yWHM
_____________________________________________
Disclaimer: This video and/or video description contains affiliate links. This means that I am awarded a small commission for purchases made through them, at no added cost for you. Thank You.
floridainshorefishingcharters...
floridanearshorefishingcharte...
mosquitolagoonsightfishing.com/
Captain Drew Cavanaugh Orlando Saltwater Flats Fishing Guide
©2024 Drew Cavanaugh Photography & DRC Enterprises of Central Florida, INC.
Specializing in backcountry flats fishing, tarpon, snook, redfish, cobia and saltwater near coastal fishing. Reef and wreck fishing off the Volusia and Brevard county coasts.
This is the closest saltwater fishing near Orlando, Kissimmee, Cocoa Beach, Daytona Beach, New Smyrna Beach, Ormond Beach, Leesburg, Palm Bay and Disney.
Please feel free to contact me should you have any questions.
How to change and replace your outboard boat engines "Internal" Sacrificial Zinc Anodes. This will help you for most of the major brands including Mercury, Yamaha, Honda, Etec, Suzuki and others. This video was for the 2007 Yamaha TLR F50 Four Stroke. Хобби
Bless you guys who go through all this trouble to help other people... thank you!
Very informative... Great video!
Thnaks
Thanks. Just got a new to me 60hp Yamaha with only 322hrs but 16yrs old. Just checked the anodes and all is well. Great video. Keep up the good work.
What did yours look like when you took them out?
Gr8 tutorial brother.
Vinaka
Thank you very much Drew, for all your self maintenace videos, it has learned me a lot how to maintain, my 50 HP Yamaha (2003) engine.
+Edwin van der Voort Thanks!
Thank you Drew. I'm going to change anodes for the 1st time and your video is full of little tips and tricks that will make the job easy.
+Steve Hudson Thx for watching!
You are real good....and appreciate your tutoring. People like you are hard to find Captain.
John Bowker Thanks!
Love this video mate thanks for the effort
Glad you enjoyed it
A quick hit with a shop vac will help remove the broken off anodes and some of the debris left inside. just hold it right over the hole for a few seconds.
Muy Interesante, Saludos
Nicely done Drew !! Awesome pace for explaining these jobs :) . Just done the same job on my F50 , but lost 3 of the anode tips in to the cooling passage :( as they broke just as you showed. Any issue with cooling on yours since you lost one into there ?
I love your video's Drew keep up the great work. I've followed all your F50 video's and everything has gone smoothly, even the water pump was a piece of cake with your help.
I'm going to do the anodes next. I assume these anodes go in to the water jacket to stop the salt water in the cooling system corroding things. So if they break off inside how and where do they come out of the engine? Not much can pass through the telltale even sand can block it, so obviously anode fragments would be bad. Or do they go in to the exhaust chamber?
Haywoodjablomie100 The exhaust chamber is what they told me they exit through... And Thank You!
Hi drew. Awesome videos, heaps of helpful advice. Just wondering how your motor is still going after the anode snapped off in the block?
+Andrew Brooks Running great!
Adding a little grease to the grommet makes it go in easier.
Hello, I have a problem. I started to change the anodes of my yamaha F60 four stroke 2005 engine and of the 5 4 they broke, removing them from how bad they were and the part of the anode that goes into the engine the pieces remained inside and I have no way to remove them since They fell inside and cannot be seen. What I can do ? It's no problem that they stay inside, does it affect the engine?
Leave them, it is ok. They will flush out later.
Thanks for your video, i saw your outboard was some many grease on it, it that okay? I have my old 2 stroke 115 also dirty as your video outboard, and someone told me just leave it will be ok
+Jerry Chan Not sure what you mean?
Drew Cavanaugh theres brown and oil on the engine just cover on the power head is that okay?
+Jerry Chan Oh yes okay. This is a corrosion spray I apply. It is a "wax" type of brown look, it is not oil or grease. It helps to stop rust from the saltwater spray we get here in Florida.
Jerry Chan Khalid
I was recently flushing my Yamaha and saw that water was leaking from that top anode? any ideas what that could be? I have the parts to replace it.
Gasket most likely. Time to replace your anodes.
that word you were looking for to describe the rubber Gromit would be beveled. just saying :)
Hi Drew.
How has your experience been with this Outboard?
How long had the anodes been in before you changed them?
Love it! I have never had any issues with the 4 stroke Yamaha's. About 6 to 7 years change them.
Thanks mate, looking forward to getting mine :-)
What is that hose you have in that water plug?
I do not remember...Sorry
Are these internal annodes on a Mercury Optimax? I was unaware
Not sure, I am not a Mercury guy
Tapered is the word for the rounded end of the grommet.
That is it! Thx
I was think thinking beveled!
Stuart Kidder I almost wanted to say "domed".
Grease the grommets
Will this work on f40f, 4stroke w
2011. Eu model is f40 fetl
Most all engine shave the anodes. Depends on models where they are located at.
Zimkanode
"Hand specification". As an engineer, you're giving me nightmares.