@xZZxTakedown 315/35/17 Nitto 555R's. They are 3 years old and they kind of suck now. The first season they were pretty sticky and worked good on the street. Not that great at the track.
about 10 seconds not bad for a heavy car. i have a trans am with the 2.73s in it also with a 3600 stall and stock motor it runs almost like that. i love punching it at 60 mph it gets to 90 so fast haha holy highway gears 90 mph in 2nd gear with a 4 speed auto
@f34rthe4banger My tuner used a "mustang dyno". Put down 336rwhp/334rwtq, which is about 380ish on a dynojet, give or take 10hp. Maybe 450ish to the crank.
Gears really don’t affect the quarter mile much with these higher stalls. I believe 3.42 shaved .2 seconds. Honestly I’d like the economy and highway cruise of the 2.73s.
@hooknbookls1 I have - Nitto 555R's (315/35/17) on a 17x9.5" c6 z06 replica wheel. If you want the 275s they will work fine. I was going for looks though.
@209seancoatello Throttle control (right foot) if I bought brand new drag radials it might hook. This wil be my 5th season on Nitto 555r's. In the video I probably don't put it to the floor for the first second.
@ScrewedByRequest ASR will actually apply the breaks if I were to floor it with it on. ASR is completely useless and can make you wreck. On this particular video I stalled it up to 1500rpms, which I still spun pretty bad. You just have to find what works and peddle the throttle. I can't mash the gas, maybe if I had slicks I could. Don't hesitate to get that 3800 :D
@Whitews6transam No it's a Z28. The 3.42s were a big improvement. Need better drag radials, cuz it spins all of first unless I am light on the throttle.
@TheHydrocortisone Yes sir, currently looking for a stock 3.42 10-bolt that only came in T-56 (6 speed) cars. But would settle for the 3.23s. That's my next and maybe my only mod I will do. I've been considering a 100 shot of nitrous, but just not sure yet. It's only a weekend warrior. Not a track car. Not sure why u think it shifts so well lol. It's been rebuilt and in this video it isn't equipped with the shift kit. It shifts smooth as butter. Shift kit was removed. I plan to put it back in
@xZZxTakedown Yes they are a good street tire. The new Nitto NT05R is supposed to be even softer. So that should grip a little better. 00 tread wear rating I hear. Yes a bit wider, not much 9.5" rims
Why are shift points set so low, should be higher with that cam
0-60 in 4.7 sec. that is really good
man that 4k stall converter keeps the rpms up there nicely
@xZZxTakedown
315/35/17 Nitto 555R's. They are 3 years old and they kind of suck now. The first season they were pretty sticky and worked good on the street. Not that great at the track.
nice camaro seems fast as hell. what kind of rim do you use for the 315s. Im lookin at getting 275 nitto555r on my camaro. I have 16'' rims. thanks.
about 10 seconds not bad for a heavy car. i have a trans am with the 2.73s in it also with a 3600 stall and stock motor it runs almost like that. i love punching it at 60 mph it gets to 90 so fast haha holy highway gears 90 mph in 2nd gear with a 4 speed auto
@f34rthe4banger
My tuner used a "mustang dyno". Put down 336rwhp/334rwtq, which is about 380ish on a dynojet, give or take 10hp. Maybe 450ish to the crank.
this is the shit.
You car pulls surprisingly well even with the 2.73 gears! Have you taken it to the track yet?
Gears really don’t affect the quarter mile much with these higher stalls. I believe 3.42 shaved .2 seconds. Honestly I’d like the economy and highway cruise of the 2.73s.
Awesome car...sounds pretty nasty too. Kinda sounded like it had a flat tire or something towards the end of the vid though...lol.
@hooknbookls1
I have - Nitto 555R's (315/35/17) on a 17x9.5" c6 z06 replica wheel.
If you want the 275s they will work fine. I was going for looks though.
@209seancoatello Throttle control (right foot) if I bought brand new drag radials it might hook. This wil be my 5th season on Nitto 555r's. In the video I probably don't put it to the floor for the first second.
That is what I have heard. A lot of people recommend the 555's for street use. I take it you have wider rims too to fit the 315's on?
@ScrewedByRequest
ASR will actually apply the breaks if I were to floor it with it on. ASR is completely useless and can make you wreck. On this particular video I stalled it up to 1500rpms, which I still spun pretty bad. You just have to find what works and peddle the throttle. I can't mash the gas, maybe if I had slicks I could. Don't hesitate to get that 3800 :D
@Whitews6transam
No it's a Z28. The 3.42s were a big improvement. Need better drag radials, cuz it spins all of first unless I am light on the throttle.
@TheHydrocortisone
Yes sir, currently looking for a stock 3.42 10-bolt that only came in T-56 (6 speed) cars. But would settle for the 3.23s. That's my next and maybe my only mod I will do. I've been considering a 100 shot of nitrous, but just not sure yet. It's only a weekend warrior. Not a track car.
Not sure why u think it shifts so well lol. It's been rebuilt and in this video it isn't equipped with the shift kit. It shifts smooth as butter. Shift kit was removed. I plan to put it back in
@hooknbookls1
I have - Nitto 555R's 315/35/17 on a 17x9.5" c6 z06 replica wheel.
@xZZxTakedown
Yes they are a good street tire. The new Nitto NT05R is supposed to be even softer. So that should grip a little better. 00 tread wear rating I hear. Yes a bit wider, not much 9.5" rims
He's being sarcastic lol. That's a stock lt1 Camaro time, he runs a lot faster than that I'm sure.
Yeah mustang dynos read low but numbers are just numbers, your car runs real good
@rpahjr
Thx, I think it was just the road, cuz I don't remember hearing anything during the filming.
@TheHydrocortisone
My tuner did increase line pressure, I believe. But that's not the best idea, it can make your pump go out.
wtf... you should be in mid 12's or even 11's with good tires.
Damn man how the hell do you stick such a good launch on an asr off , 4k rpm auto? (was wondering about gettin a 3800)
@kencoleman200
They are listed in my other videos.
@TheHydrocortisone
I hope that's a compliment haha
@luvscience44
yeah without a supercharger too
@bigdoo350 2.73s in the video. Now I have 3.42s
Badass man! That is one fast Camaro! I have a 2001 SS with a Yank 4000 and BBK Long tubes!
Cars sounds great, have you had it on a dyno yet? If so what kind and what numbers did it make
@zzzurd
No, never been to the track.
@ManRossDamn
Well I should hope so. :D
@Teakwo23
Ha, it's not THAT fast.
What kind of tires do you run?
What are the cam specs great sound
@allbaugh04 I have 3.73
What gears in the rear end
Dude that thing launches pretty sweet and sounds awesome.
@dcgarza4 Thanks..
@v8pontiacvent
2.73
I really want one of these cars!
Very nice car
Nice run! What gear ratio do you have?
It does great, fun as hell to drive.
it sounds awesome!
Do you have a trans cooler?
Fermin Vallejos Yes, biggest trans cooler I could find
Tim Timmy what kind did you get I need to get me one this Friday
Fermin Vallejos B&M, I think it was like 28800 BTU but I can't recall but the B&M 70274 on Amazon looks comparable.