1974 Kawasaki Z1 900 Drive Chain Conversion from 630 to 530 Part#1

Follow along as we convert the drive chain and sprockets on a 1974 Kawasaki z1 900 from a 630 chain to a 530 oring sealed one.
This video is for entertainment purposes only. This is not a how too video . Do not try this at home! Someone could get injured or die.
Part # 2
• 1974 Kawasaki Z1 900 D...

[@zman5727]

whaaaaaaat?

[@MeandMyShadow-u3c]

Ok what can I do for you

[@zman5727]

@@MeandMyShadow-u3c Ok, was a 530 chain spec'd for your 1974 Z1? I use a 630 on my 77 KZ1000
and it works the best. I had a 530 on it before (all i could get at the time) and it stretched like mad. Like i has to adjust it WEEKLY. The 630 stretches very little.

[@MeandMyShadow-u3c]

@@zman5727 Yes a 630 non o-ring standard chain was spec'd for a 1974 Z1. There is a sticker underneath the seat that states the dealer will only replace the chain once under warranty. In 1975 they went to a 6.30 o-ring chain which was wider and had many new parts. A 630 sealed (o-ring chain) will not fit on a 1974 Z1 but a 5.30 chain will. With new metallurgy in 2021 a good 530 will last longer and wear better than anything produced in the 1970's. If you go to 23.43min of part one, all the parts and part#'s are shown