Im working on different ways to bring better quality and as much information as possible to the reviews, getting comments like yours feel really rewarding, so big thanks! Also more mouse and mousepad reviews coming soon
One thing no one ever mentions about mice, and maybe you want to start considering or putting this into your reviews is that when you replace skates sometimes; notice how MOST of these companies put indents and small humps where the skates used to be!? I know this is because their stock skates are shaped in a way that the edges are more rounded and needs to be lifted but I've seen skates that are solidly flat. I mean just let the darn skates sit flat for crying out loud. Had this complaint pent up in me for a while, and I noticed this when I saw the bottom part of the Sora V2 in your review. Just perfectly flat with the exception of the screw holes and one tiny hole on the palm side. Perfect!
I just received it yesterday but the shape doesn't feel right. I fingertip it but the ring and pinky finger can't grip the mouse right bcs of the hump. Now I'm sitting here with a 100 dollar mice and have to go back to my 80 gram gpw 😭
Feels bad man, although it is a claw oriented shape I had no problems using a fingertip grip. The GPX is not the best option for fingertip, my recomendations for a true fingertip mouse are the Beast X, HTX or ULX
I like the fit on the right side of my razer Basilisk V3 wireless (not pro) because I can fit both ringfinger and pinky and ofc left sides little "shelf" for thumb is nice. What I wonder is if you have enough space for the right side when not using a claw grip since when I claw pinky is further back but I don't use a claw grip exclusively. So will it be possible to fit two fingers, usually below right button?
@@brunolrnc thanks for the response and I have checked what size is needed but I kinda went a lot further than just that heh. So the lower half of this msg isn't really relevant, I was just on a roll and kept writing. 😂 I made a line to mark the part that is skipable. if you know the size of the Basilisk v3 or the g502 x wireless you could imagine what size is needed. The Basilisk is just enough but the g502 has the right button going down on the right side edge making it have less grip size possible. But I measure the Basilisk and where I hold it when I hold my fingers straight and it's always being from the button and down(halfway of the button length) and it's between 14.2-14.8mm while my fingers are about double just measuring flat and next to each other which isn't the grip style. To put it short/simple I need at the least 14mm from the right edge of the right button to bottom of the mouse. Best is 15mm as minimum. If you can check the measurement from right button start where it's the widest to around middle of the button. ----------------------------------- I have a semi claw grip on the Basilisk since it's somewhat larger and kinda long its ergonomics isn't made for full claw. For wired and full claw I have a zowie EC3-C and a mouse like that has a very large side, about 25mm halfway of the right button. I switch to the zowie at times for specific games but getting used to wireless I do it less and less but the Basilisk doesn't flick as easy with its weight. I'm also a bit razer biased with having a my keyboard and having used razer since the first death adder came. I think I might be best off getting a DA wireless as long as weight is below 75-80 grams.
Hello man thanks for the review. Quick question, my hand size 185x105mm and using hybrid or relaxed claw grip. What would you do recommend. Endgame Op1we or sora v2 or zowie u2 or maybe vaxee np-01/np-01s? Also if I go ergo mouse could be vaxee outset ax 4k. I'm using razer deathadder V3 Pro atm but it feels longer and wider so its bulk for me and making in pain to my elbow. I like the hump backword against middle. Therefore I can't locked in from the palm. Thanks for the advice in advance.
For claw I recommend the Sora V2, it is made for your grip style and it’s the lightest. I recommend getting the white one if you sweat a lot from your hands
Hey, great video man. Whats your opinion after the upload ? Did you use it , how are the clicks etc. ? Im close buying this mouse but cant find after reviews.
Hey there, thank you! I ended up selling the Sora because I got better mice that fit my grip style (fingertip). However I believe the Sora V2 is still the best wireless lightweight mouse for claw grip users
Great review, thank you! The camera upgrade is great, definitely a good investment! The only feedback I would like to leave is about the audio. The hissing & hard cuts produced by the compression makes it a little bit difficult to listen to the commentary. I have had my eyes on this mouse for a while now, and just wondering if there are any specific mouse skates you would recommend for someone who also uses 1600 dpi? And do you think for someone with 19/10 hand, who swaps between claw & relaxed claw this mouse is a good choice? I am mainly worried about the size of the mouse. Thanks!
Loved your comment. Thanks for all the advice! At the time I recorded this video I had an headset, my most recent videos are recorded with my new microphone. My #1 skates recommendation will always be X-Raypad Jades. I’ll make a video on them in a near future. I think the Sora is one of the best options for a claw grip wireless lightweight mouse
Great Review! I just wanna ask, I'm also getting the sora v2 and was wondering what skates should I buy for it? I have the hayate otsu soft mousepad. Should I go with xray obsidians or jades? Thanks!
I got 2 AC Pro’s, they’re the only X-Raypad pads that got my interest. I own a lot of Artisan pads and the new Wallhack cloth pads will arrive probably next week. Expect mousepad reviews and comparisons soon!
I’ll be honest with you, I never charged the Sora 😅. Because it is a 1K polling rate mouse the battery will last way longer than higher polling rate mice. Take in consideration that I own a lot of mice and keep switching between them. Thanks for commenting tho!
Damn bro nice review you actually deserve a lot more subs!! btw I had a question will it stutter or cause problems if I use it in 4k with my pc which has Ryzen 5 5600?
@@brunolrnc I tried every browser and it didn’t work. Ultimately, I downloaded the software off Ninjutso and it works from there - I just can’t use the web version. Didn’t realize when I wrote this comment that I could download the software too.
straight to the point with no bullshit extremely engaging review, congrats fr
🫡
never seen this channel before, honestly surprised by how in depth and quality the review was. W video, keep it up, definitely earnt a subscriber 💯
Welcome aboard! Comments like this fill my heart ❤️
Good video. well executed and a lot of good info given. amazing work
Im working on different ways to bring better quality and as much information as possible to the reviews, getting comments like yours feel really rewarding, so big thanks! Also more mouse and mousepad reviews coming soon
Great job! Gonna buy this soon. :)
It’s a great mouse, if it fits your grip style and hand size you won’t regret it
@@brunolrnc I have fingertip so I hope it fits. ♥️
Nice video !
39g without holes its insane !!!
It really is, thank you for the support
Very good review 👊🏼
Thanks!
Great job on the video, awesome mice for comparing. Also can't wait for next vid about keyboard. Keep it up bro!! 💪 💯
good review and very nice camera quality with the new camera
Thanks! I’ve always used the iPhone 15 Pro to record. The new thing is a desk arm to hold the phone in this point of view
Subb 'd - good review. Keep the comparisons coming since you have a great collection going! Happy April 🎉💐 Spring 🌱
Thanks for your support! More mouse and mousepad reviews coming April
Nice content! I am struggling picking out a mouse. I can't decide between endgame OP1 8k and ninjutso sora v2. I play cs and valorant on low sens.
I would go with the Sora V2 because of wireless and lightweight
One thing no one ever mentions about mice, and maybe you want to start considering or putting this into your reviews is that when you replace skates sometimes; notice how MOST of these companies put indents and small humps where the skates used to be!? I know this is because their stock skates are shaped in a way that the edges are more rounded and needs to be lifted but I've seen skates that are solidly flat. I mean just let the darn skates sit flat for crying out loud. Had this complaint pent up in me for a while, and I noticed this when I saw the bottom part of the Sora V2 in your review. Just perfectly flat with the exception of the screw holes and one tiny hole on the palm side. Perfect!
Flat bases are good so you can put any skate you want, true!
have you used the sora 4K? if yes what the difference with sora v2?
Never used the Sora 4k
no angle snapping like on sora 4k?
Hi is the sora v2 wider or narrower in the grip width than x2v2 mini ?
Hey there, I don’t have an x2v2 mini, maybe try to look on the eloshapes website
I just received it yesterday but the shape doesn't feel right. I fingertip it but the ring and pinky finger can't grip the mouse right bcs of the hump. Now I'm sitting here with a 100 dollar mice and have to go back to my 80 gram gpw 😭
Feels bad man, although it is a claw oriented shape I had no problems using a fingertip grip. The GPX is not the best option for fingertip, my recomendations for a true fingertip mouse are the Beast X, HTX or ULX
Np bro. I selled it and only lost a few bucks.
Do you also have extended fingertip recommendations aside from fingertip ?@@brunolrnc
I like the fit on the right side of my razer Basilisk V3 wireless (not pro) because I can fit both ringfinger and pinky and ofc left sides little "shelf" for thumb is nice.
What I wonder is if you have enough space for the right side when not using a claw grip since when I claw pinky is further back but I don't use a claw grip exclusively. So will it be possible to fit two fingers, usually below right button?
It depends a lot on your grip style, hand size and finger size. That’s something I can’t answer
@@brunolrnc thanks for the response and I have checked what size is needed but I kinda went a lot further than just that heh. So the lower half of this msg isn't really relevant, I was just on a roll and kept writing. 😂
I made a line to mark the part that is skipable.
if you know the size of the Basilisk v3 or the g502 x wireless you could imagine what size is needed. The Basilisk is just enough but the g502 has the right button going down on the right side edge making it have less grip size possible. But I measure the Basilisk and where I hold it when I hold my fingers straight and it's always being from the button and down(halfway of the button length) and it's between 14.2-14.8mm while my fingers are about double just measuring flat and next to each other which isn't the grip style.
To put it short/simple I need at the least 14mm from the right edge of the right button to bottom of the mouse. Best is 15mm as minimum.
If you can check the measurement from right button start where it's the widest to around middle of the button.
-----------------------------------
I have a semi claw grip on the Basilisk since it's somewhat larger and kinda long its ergonomics isn't made for full claw. For wired and full claw I have a zowie EC3-C and a mouse like that has a very large side, about 25mm halfway of the right button.
I switch to the zowie at times for specific games but getting used to wireless I do it less and less but the Basilisk doesn't flick as easy with its weight.
I'm also a bit razer biased with having a my keyboard and having used razer since the first death adder came. I think I might be best off getting a DA wireless as long as weight is below 75-80 grams.
Great review!!!!! I just got one for myself too. I have small hands and use claw grip, so I hope it will be a good fit for me.
Cheers, you will enjoy it
Hello man thanks for the review. Quick question, my hand size 185x105mm and using hybrid or relaxed claw grip. What would you do recommend. Endgame Op1we or sora v2 or zowie u2 or maybe vaxee np-01/np-01s? Also if I go ergo mouse could be vaxee outset ax 4k. I'm using razer deathadder V3 Pro atm but it feels longer and wider so its bulk for me and making in pain to my elbow. I like the hump backword against middle. Therefore I can't locked in from the palm. Thanks for the advice in advance.
For claw I recommend the Sora V2, it is made for your grip style and it’s the lightest. I recommend getting the white one if you sweat a lot from your hands
@@brunolrnc thank you my friend
Have u tired the op1 8k, and if so, would u prefer the sora v2 or the op1 8k?
Never tried the op1 8k, at this point I will never buy a wired mouse again
Hey, great video man. Whats your opinion after the upload ? Did you use it , how are the clicks etc. ? Im close buying this mouse but cant find after reviews.
Hey there, thank you! I ended up selling the Sora because I got better mice that fit my grip style (fingertip). However I believe the Sora V2 is still the best wireless lightweight mouse for claw grip users
How does it compare in size to the Logitech GPX?
The GPX is bigger. In the description you have a link called Eloshapes. There you can compare mice shapes
@@brunolrnc TY!
W video W youtuber W everyhting W i subbed
Thanks!
Great review, thank you!
The camera upgrade is great, definitely a good investment! The only feedback I would like to leave is about the audio. The hissing & hard cuts produced by the compression makes it a little bit difficult to listen to the commentary.
I have had my eyes on this mouse for a while now, and just wondering if there are any specific mouse skates you would recommend for someone who also uses 1600 dpi? And do you think for someone with 19/10 hand, who swaps between claw & relaxed claw this mouse is a good choice? I am mainly worried about the size of the mouse. Thanks!
Loved your comment. Thanks for all the advice! At the time I recorded this video I had an headset, my most recent videos are recorded with my new microphone.
My #1 skates recommendation will always be X-Raypad Jades. I’ll make a video on them in a near future. I think the Sora is one of the best options for a claw grip wireless lightweight mouse
how did they ship it to you and what was the shipping experience like? Were they on time?
It was fine, took normal time from China to Europe
@@brunolrnc did they have a tracking number? bc i ordered a sora v2 but havnt heard anything since
@@quinnvandenberg9656 I think so
does it leaves some sweat/oil/fingerprint marks?
The black one definitely. The white does a better job hiding them
Hi! Should i go for this one or for the beast x. I mainly use f tip grip
The Beast X is a better option for fingertip. The Sora is a better option for claw.
Great Review! I just wanna ask, I'm also getting the sora v2 and was wondering what skates should I buy for it? I have the hayate otsu soft mousepad. Should I go with xray obsidians or jades? Thanks!
Thank you! I own the same pad, my recommendation is go with the Jades
I need sora v2 mini
Is the coating similar to the lamzu thorn coating feeling?
I would say is a bit different. Thorn Fnatic Edition Review coming soon 👀
Good video, I subscribed
Thank you
how's the ac pro? can u compare it to an ac2 or an ac zero?
I got 2 AC Pro’s, they’re the only X-Raypad pads that got my interest. I own a lot of Artisan pads and the new Wallhack cloth pads will arrive probably next week. Expect mousepad reviews and comparisons soon!
alright, looking forward to it
compras-te o sora pelo site deles?
Yes
@@brunolrnc alfandega?
Hows the battery life with comp mode on?
I’ll be honest with you, I never charged the Sora 😅. Because it is a 1K polling rate mouse the battery will last way longer than higher polling rate mice. Take in consideration that I own a lot of mice and keep switching between them. Thanks for commenting tho!
how long does ship takes to Poland?
Depends on where you buy
Damn bro nice review you actually deserve a lot more subs!! btw I had a question will it stutter or cause problems if I use it in 4k with my pc which has Ryzen 5 5600?
Thanks! I have exactly the same CPU, till this day I had no problems using high polling rates
Watch out, the web based software is buggy for some of us. It cannot connect to my mouse.
Thats strange, what browser are you using?
@@brunolrnc I tried every browser and it didn’t work. Ultimately, I downloaded the software off Ninjutso and it works from there - I just can’t use the web version. Didn’t realize when I wrote this comment that I could download the software too.
how long was the shipping?
2 to 3 weeks
nice
the dongle looks like it can pull off 48000 hz compared to the Logitech GPX 2 Dongle with 4000 hz lol
I wish it could do 8k, but for that we’ll need to buy another one
"Nicest" feature? I hate web apps. It's a desktop, make a desktop app. 4:25
Hi
👋🏻
no pro players including myself use this mouse, I smashed in my review
I saw it yesterday lmao
Lol
SEN TenZ used it in VCT Americas this year
just get 50$ mouse still same specs to these overprice wester or european mouse or korean
Don’t worry, in the future I’ll bring more affordable mice to the channel.
@@brunolrnc my comment sound too blunt but please that would be great theres alot great "OEM" Gaming Mouse or Chinese Mouse from china to pick
VXE R1 Pro soon
Ninjutso Sora V2 scam
?