Dobry wieczór, proszę o pomoc.Mam Ricoh MPC 3003, który ciągle wyświetla błąd sc 670-01 za każdym razem, gdy wysyłam go do drukowania, zamykam ibernację lub otwieram ADF, nie wiem, dlaczego to otrzymuję błąd, czy mógłbyś mi pomóc, jak go rozwiązać, czy co?Muszę wymienić dzięki
Hello, I’d like to ask the reason why after I changed the SC562-02 model to the FUSE, and reset the copier according to the steps you explained. It couldn’t solve the problem
hello my friend. I have the same code at MPC5502. That is intermittent, at the morning show it, if i reset that with 5810 doesnt appear along the day, but the next day appear again, i think that appears when the machine is cold, that code (552) refers at the end thermistor in the manual, could you give some idea to solve this code? thanks
@vivaingenieria2926 Hi. First of all, you need to know that soon your machine will turn off permanently and you won't be able to reset it. I'd love to help you, but it takes time. You can become a supporter of the Level master Serwis channel and then write to me and I will be able to devote time to you. I'll tell you what to do and they'll contact you directly. I'll need a picture of your team playing another. But that's only after you subscribe. Link for supporters: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin
i have a problem with sc552 and sc547-02 on the MP3554 machine, i have changed the Thermistor but still the same code comes out. what is the other cause?
After 120,000 you always have to replace or regenerate the FUSER. So replace the heating foil, moisturizing element and pressure roller. It's a lot of work, but it will solve your problems. Later, write to me if you succeeded.
Hello Dear i am facing same issue in my Ricoh IM 3500 Black printer (SC 554-02) error code i used Pico fuse but 5810 # 2 always showing failed please support or give the suggestion .i am changing new fusser assembly first one heat roller is damaged. Thanks
Hi dear sir i want to ask about Ricoh IM 8000 black printer i change new toner but printer not accept and saying NO toner i changed new toner checked and clean complete hopper assembly but issue is still there if you have any knowledge or idea so please share with me tahnk you. @@MrRicoh
I'm glad that my video helped you repair the copier. I hope everything worked out or you just increased your knowledge. 😄 😁 😆 Start supporting this channel and you'll get these bonuses 😄 😁 😆 💥 🔥 ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin 💥 🔥
No sé de qué país eres. El fusible se puede comprar en mi tienda, pero solo vendemos en Europa. ¿Donde vives?www.copy-expert.pl/produkt.php?iden=242090
Replacing the fuse will do nothing. You need to find the cause of this sc552 fault. You probably have used thermistors or heating foil. You need to replace worn parts in the fuser unit. See how it's done in my video: ruclips.net/video/kaDiCrrYy2I/видео.html or ruclips.net/video/hEyYOEB_xz0/видео.html
Uma das minhas ricoh mp c3002 dá o erro SC554, mantendo bloqueada e a outra do mesmo modelo só acende luz vermelha mas não dá erro, mantendo desbloqueada
Para reinicializar a falha SC 554, você deve inserir um novo fusível. Lembre-se de que o fusível é descartável. Portanto, primeiro determine a causa do erro sc554 e, em seguida, faça uma reinicialização. To reset the sc fault 554 you have to insert a new fuse. Remember that the fuse is disposable. So first determine the cause of the sc554 error and then do a reset.
A PICO FUSE fuse must be installed in the new heater. Then enter the service mode and perform a reset. It cannot be reset otherwise. PICO FUSE: copy-expert.pl/produkt.php?iden=242090 video: ruclips.net/video/Q_XevYoWtrY/видео.html
i already follow ur step according to ur vdeo..but still the same ..i used old pico fuser .. not new fuser.. can or not?.. i already pm u on massenger i hope u notice thanks
The PICO FUSE fuse is disposable. It can only be used once. You need to install a new one. I have a tip on how to reset with the old fuse, but the video is just being recorded about it.
Tengo el error C552, pero no entra en modo servicio con el código 806182, pude entrar a modo servicio con el código 143, pero no tengo la opción 5810, tampoco la 3902 ¿Alguna idea para entrar a modo servicio y ver 5810 fusing sc reset?
@@MrRicoh Gracias por responder, se dañó la filimina y la reemplacé, tambien probé la continuidad del termostato y está bien, los termistores se ven bien, estoy consiguiendo el fusible, pero quisiera borrar el error ¿sabes por que no me aparece el 5810?
Thank you. I appreciate your opinion. Greetings from Europe. Soon there will be a competition with prizes on the channel. It will be necessary to guess the brand of the copier, which he will show, so please come back soon.
Ridiculous design. I have worked on copiers since 1989 and started to repair Ricoh copiers in 2018. I don't think I've seen other manufacturers where you need to insert a fuse like this.
Reemplace el láser y todo estará bien. Me refiero a este artículo: copy-expert.com/pl/p/LASER-UNIT-RICOH-Aficio-MPC3003-MPC3503-MPC4503-MPC5503-MPC6003-D1491855-AX060419/4079
my MP3554 machine has a toner removable problem when print or copy. I have replaced the fuser roller, developer, drum, cleaning blade, charger roller but the same problem still occurs? is there another problem? the machine also issues the codes sc547 and sc552
Hi. The error codes you gave and the symptoms you write about indicate the wear of the heating unit. Fuser Unit or Fusing Unit in other words. Every 60,000 copies you probably replace the OPC drum and other elements you mentioned, but after 120,000 you always have to replace or regenerate the FUSER. So replace the heating foil, moisturizing element and pressure roller. It's a lot of work, but it will solve your problems. Later, write to me if you succeeded.
Thank you very much, Mr Tomasz.
Greetings from México.👋🏽
Dobry wieczór, proszę o pomoc.Mam Ricoh MPC 3003, który ciągle wyświetla błąd sc 670-01 za każdym razem, gdy wysyłam go do drukowania, zamykam ibernację lub otwieram ADF, nie wiem, dlaczego to otrzymuję błąd, czy mógłbyś mi pomóc, jak go rozwiązać, czy co?Muszę wymienić dzięki
W tych kopiarkach nagminnie padają kontollery: copy-expert.com/pl/c/Karta-sieciowa-Controller/19/1/default/1/searchquery/mpc3003
Hello, I’d like to ask the reason why after I changed the SC562-02 model to the FUSE, and reset the copier according to the steps you explained. It couldn’t solve the problem
And what parts do you replace before the reset?
Teşekkür Tomasz
Selamlar. Kanalıma abone olmayı unutmayın.
hello my friend. I have the same code at MPC5502. That is intermittent, at the morning show it, if i reset that with 5810 doesnt appear along the day, but the next day appear again, i think that appears when the machine is cold, that code (552) refers at the end thermistor in the manual, could you give some idea to solve this code? thanks
@vivaingenieria2926 Hi. First of all, you need to know that soon your machine will turn off permanently and you won't be able to reset it. I'd love to help you, but it takes time. You can become a supporter of the Level master Serwis channel and then write to me and I will be able to devote time to you. I'll tell you what to do and they'll contact you directly. I'll need a picture of your team playing another. But that's only after you subscribe. Link for supporters: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin
i have a problem with sc552 and sc547-02 on the MP3554 machine, i have changed the Thermistor but still the same code comes out. what is the other cause?
After 120,000 you always have to replace or regenerate the FUSER. So replace the heating foil, moisturizing element and pressure roller. It's a lot of work, but it will solve your problems. Later, write to me if you succeeded.
Hello Dear i am facing same issue in my Ricoh IM 3500 Black printer (SC 554-02) error code i used Pico fuse but 5810 # 2 always showing failed please support or give the suggestion .i am changing new fusser assembly first one heat roller is damaged. Thanks
After replacing the Fuser Unit, you must reinstall the new Pico Fuse and reset the machine again. The Pico Fuse can only be used once.
thank you so much.printer is ok now
@@MrRicoh
I'm happy and greet you.
Hi dear sir i want to ask about Ricoh IM 8000 black printer i change new toner but printer not accept and saying NO toner i changed new toner checked and clean complete hopper assembly but issue is still there if you have any knowledge or idea so please share with me tahnk you. @@MrRicoh
@Annju007 Did you solve the problem? I couldn't answer earlier. Sorry and best regards.
Thank you very much for the movie about copiers. Nice done. I found this procedure useful. Greetings.
I'm glad that my video helped you repair the copier. I hope everything worked out or you just increased your knowledge.
😄 😁 😆 Start supporting this channel and you'll get these bonuses 😄 😁 😆
💥 🔥 ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin 💥 🔥
Parabéns pelo ótimo vídeo !!! Obrigado
Muito obrigado.
Hola, realicé el video paso a paso pero el error continúa, que debo hacer?
Jakie elementy wymieniłeś ?
Its super ✌
Thank You
Thank you Tomasz
😄 😁 😆 Thanks.
thanks bro
Best wishes from Europe.
Amigo, donde puedo conseguir ese fusible ? Mi máquina tiene ese problema
No sé de qué país eres. El fusible se puede comprar en mi tienda, pero solo vendemos en Europa. ¿Donde vives?www.copy-expert.pl/produkt.php?iden=242090
Very good
Thank You
Bom dia! Tenho uma RICOH 4502 e dá o erro 552 diariamente várias vezes. A solução seria essa troca do fusível ?
Replacing the fuse will do nothing. You need to find the cause of this sc552 fault. You probably have used thermistors or heating foil. You need to replace worn parts in the fuser unit. See how it's done in my video: ruclips.net/video/kaDiCrrYy2I/видео.html or ruclips.net/video/hEyYOEB_xz0/видео.html
@@MrRicoh Já realizei a troca da película e também do rolo de pressão, mas não resolveu.
Hi dear, could I do the same for Ricoh C2503?
Yes, you must do the same.
Uma das minhas ricoh mp c3002 dá o erro SC554, mantendo bloqueada e a outra do mesmo modelo só acende luz vermelha mas não dá erro, mantendo desbloqueada
Para reinicializar a falha SC 554, você deve inserir um novo fusível. Lembre-se de que o fusível é descartável. Portanto, primeiro determine a causa do erro sc554 e, em seguida, faça uma reinicialização.
To reset the sc fault 554 you have to insert a new fuse. Remember that the fuse is disposable. So first determine the cause of the sc554 error and then do a reset.
Bonjour j'ai aimé
Merci pour ton commentaire et reviens encore.
🔥🔥 RUclips SUPPORT: ruclips.net/channel/UCOHtXTtGHj33pUm8Gf2FH3Ajoin
😁😆 PATREON: www.patreon.com/CopyExpertMovieStudio
🔥💥 PATRONITE: www.patronite.pl/1796
hi tomaz can u help me.. sc552-02.. i also change fuser but still same
A PICO FUSE fuse must be installed in the new heater. Then enter the service mode and perform a reset. It cannot be reset otherwise.
PICO FUSE: copy-expert.pl/produkt.php?iden=242090
video: ruclips.net/video/Q_XevYoWtrY/видео.html
i already follow ur step according to ur vdeo..but still the same ..i used old pico fuser .. not new fuser.. can or not?.. i already pm u on massenger i hope u notice thanks
The PICO FUSE fuse is disposable. It can only be used once. You need to install a new one. I have a tip on how to reset with the old fuse, but the video is just being recorded about it.
thanks boss tomasz.. really useful.. i buy a new pico fuse.. code disappear . thanksss
hiii boss tomasz mpc3003 code sc370-02 can u help me.. i already chnge trnsfer bag clean sensor but still same
Tengo el error C552, pero no entra en modo servicio con el código 806182, pude entrar a modo servicio con el código 143, pero no tengo la opción 5810, tampoco la 3902 ¿Alguna idea para entrar a modo servicio y ver 5810 fusing sc reset?
¿Y reparaste la máquina primero?
@@MrRicoh Gracias por responder, se dañó la filimina y la reemplacé, tambien probé la continuidad del termostato y está bien, los termistores se ven bien, estoy consiguiendo el fusible, pero quisiera borrar el error ¿sabes por que no me aparece el 5810?
👍🏻👍🏻
Hot element and hot movie.
Good
Thank you. I appreciate your opinion. Greetings from Europe. Soon there will be a competition with prizes on the channel. It will be necessary to guess the brand of the copier, which he will show, so please come back soon.
Made in Brazil
And video in Poland :)
Very usefull
This fuse is a surprise for many services. But now you know what's going on.
Good Good
Thank you and invite you to subscribe to my channel.
Good gob
Thanks
Mu ricoh doesnt show the 5810 options
I try to update firmaware and appers
You Dont hace access at this function
(E57 or E47) i Dont remember well ricoh 4503
I talked to my friends about the lack of 5810 and no one knows what it is about.
@@MrRicoh i already updated the firmware, i finally access at sp mode service With reset 107107 c… :) and i can see all the panel options
@@MrRicoh o was enter at sp mode (factory) , the person who sold me didnt know than the default access code to sp mode (servicas) has beben changed
@danielalfonsojimenezsuarez Did you solve the problem? I couldn't answer earlier. Sorry and best regards.
Ridiculous design. I have worked on copiers since 1989 and started to repair Ricoh copiers in 2018. I don't think I've seen other manufacturers where you need to insert a fuse like this.
Hi. I have been repairing copiers for 25 years and now I see this solution for the first time. Such a new Ricoh idea for all new models.
Help me, fix error sc552-02 for c4503, im Clear 5810, but error
If you have not installed a new fuse, this error will never be removed.
ở VN thì ko bao giờ đặt 5810, nếu thao tác sẽ phải hối hận
How to do that fuse
Vietnam
You have to buy it. Thank you and invite you to subscribe to my channel.
Eat is the treatment sc240 04ricoh 4503
Reemplace el láser y todo estará bien. Me refiero a este artículo: copy-expert.com/pl/p/LASER-UNIT-RICOH-Aficio-MPC3003-MPC3503-MPC4503-MPC5503-MPC6003-D1491855-AX060419/4079
какой парт номер этой запчасти?
Загляните в наш магазин, там вся информация: copy-expert.pl/produkt.php? iden=242090
my MP3554 machine has a toner removable problem when print or copy. I have replaced the fuser roller, developer, drum, cleaning blade, charger roller but the same problem still occurs? is there another problem? the machine also issues the codes sc547 and sc552
Hi. The error codes you gave and the symptoms you write about indicate the wear of the heating unit. Fuser Unit or Fusing Unit in other words. Every 60,000 copies you probably replace the OPC drum and other elements you mentioned, but after 120,000 you always have to replace or regenerate the FUSER. So replace the heating foil, moisturizing element and pressure roller. It's a lot of work, but it will solve your problems. Later, write to me if you succeeded.
@@MrRicoh a mi me pasa igual aunque ya le hice mantenimiento aun me sigue borrando imagen, y dando codigo sc 552-02 que le puedo hacer
Thank you Tomasz
I'm glad I could help you. What country are you from?