Wireless Transmission of Energy (+Circuit)
HTML-код
- Опубликовано: 1 окт 2024
- You need just a 9V battery as power supply to transfer electrical energy and demonstrate it. REAL and very effective " transfer of electrical energy" as Nikola Tesla did almost two centuries ago with no use of spark gap, but a modern setup using a transistor and extremely easy electronic RF circuit diagram (no induction effects).
Super cool!! and too think Tesla was doing this 100 years ago....The powers that be certainly curtailed electrical research for a very long time. keep up the great work...
What a great demonstration of wireless power transfer system . Thank you for sharing your testing and circuit diagrams .
woooowwwwwwwwww I think I found a solution to my problem🤨🤨🤨🤨🤨🤨
Excellent work, many thanks for sharing ❤
Excellent explanation, thank you so much 👍😀
Nice! If you replace the "antenna" to just alloy foil, working as well! :) Foil ball.
Very cool!
Awesome videos on your channels. Thanks for sharing? Really good how you explain it with the schematics.
Can you name me the type of your variable capacitor?
Thank you.
You may use any type you like from 10 or 100 to 300pf or more.?
You can find this one in Ali Express.
@@gsav2504 do you have a modelnumber? Just found CBM-443BF.
Thank you 🙏
If only the Inverse Square Law wasn't a thing. ;)
the awesomeness that he shares the schematics.
Excellent demonstration of the concept. Слава Україні!
Very nice thanks
Tesla's wireless power did not utilise Herts it was measured in volts per sec.
....the transistor in the circuit diagram didn't exist for another 50 years after 1898.....
2n2219 is easy to find! you will find lots of them by e-bay in good price.
can you make a Cold Bath?
Amazing!
I don't know anything about electricity. But I can see the wire you call "ground" is connecting both sides of the setup. For me, that makes it seem like it's not wireless, but is just going through the wire? Why not try to connect to the real ground to see if it still works? Otherwise, maybe the power transmission you are experiencing is just going through the cable? Also, how do you get the signal to 16 MHz? What part of the circuit generates this oscillation? Is it just a function of the design of the coils? Are the coils free metal or are they coated with an insulator?
The “ground” can be connected at the part of the transmitter with the same results. It is a real wireless transmission of energy. If you want to use a real ground then you need power.
Muito obrigado Amigo👏👏👏👏🇨🇨🇨🇨👍👍
С розетки наврдящее электричество эдс т.к земля ещё вторая присутствует образуется ток разность потенциалов
Никакое сравнение здесь!
It'll probably be better to refer to that as single wire transfer... Since you could probably put some kind of shielding in between the antennas and it was still get a signal.... Can't always count that the ground is conductive enough to be usable as that wire... Nevada for instance has terrible conductivity in the ground
@@3zdayz Nikola Tesla did such an experiment in Colorado Springs using the ground as a conductor. There was snow all around this place.
@@gsav2504 exactly
Thanks for the nice video :)
Is there a surplus of energy in the system like a gain, like a over unity thing going on when the receiver LC is turned of? Can you expand on that please :) What is going on? Thanks
There are no overunity effects here. Only a good efficiency Q of the transferred energy to 90%, when the resonance is right.
@@gsav2504 thanks for the reply :) what if there are more recivers will it create overunity? my experience is that they start working as transmitters aswell.
@@martinetellerandet8566 I did already this experiment. The transfered power is being splinted in two parts (2 receivers) exactly as with wires!!!! It is amazing.
Здравствуйте G Sav,
Just for understanding, If you make the ground, same at the Receiver and the Transmitter. The distance is not important it can go as high as 15 m or maybe even higher. But you showed us at 09:19 , grounds are different and the distance is just 30 cm. So the main idea is, resonate the frequency and same grounds. Did I understand it correctly sir. Lastly do you have something in your mind to improve the distance without same ground.
Большое Спасибо
The Video at 9:19 shows that the transmitter ist already connected with the ground of the house and if the antenna und the ground (wire) of the receiver have the same length , then by approaching we can achieve energy transfer with no wire connection at all.
In this case is like an induction circuit but with a great efficiency. 30cm is with 0.5w. Can you imagine how much more efficient it would be if the power of the transmitter is higher???
@@gsav2504 It would be fascinating to see. But do you think the amount of noise that transmitter created could cause some problem on other receivers like our phone ?
Thank you for your answers. I'll be waiting for your new experiments.
Have a good day.
@@EmirCerit don’t worry about it. Forget the Herzian waves. If you tune it well as I demonstrated then you have 0 harmonics!!!!
Dear friend I try it with 547 transistor but it does not work may you make an other video explaining how to
Why don’t you use the same transistor 2N2219? The BC547 have little power.
@@gsav2504 I haven’t it. My you explain about the coil of 20 turn please
@@variousexperiences6485 Very simple. On a 8mm cylinder wrap 20 turns of 0.5mm magnetic wire. make a tap and turn 6 more turns in the same direction. For the connection, look the circuit diagram!
@@gsav2504 ok thanks for your reply
I like your setup for this. Great idea to use those variable capacitors. I wonder if you could extend the receiving distance.
It's a very good demonstration. 👌👍👍👍
The distance between transmitter und receiver can be extended.
why do people not use AI for vocals?
Używają